Microchip MCP73862 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Microchip MCP73862 (34 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/34
2004-2013 Microchip Technology Inc. DS21893F-page 1
MCP73861/2/3/4
Features:
Linear Charge Management Controllers:
- Integrated Pass Transistor
- Integrated Current Sense
- Reverse-Blocking Protection
High-Accuracy Preset Voltage Regulation: + 0.5%
Four Selectable Voltage Regulation Options:
- 4.1V, 4.2V – MCP73861/3
- 8.2V, 8.4V – MCP73862/4
Programmable Charge Current: 1.2A Maximum
Programmable Safety Charge Timers
Preconditioning of Deeply Depleted Cells
Automatic End-of-Charge Control
Optional Continuous Cell Temperature Monitoring
Charge Status Output for Direct LED Drive
Fault Output for Direct LED Drive
Automatic Power-Down
Thermal Regulation
Temperature Range: -40°C to +85°C
Packaging: 16-Pin, 4 x 4 QFN
16-Pin SOIC
Applications:
Lithium-Ion/Lithium-Polymer Battery Chargers
Personal Data Assistants (PDAs)
Cellular Telephones
Hand-Held Instruments
Cradle Chargers
Digital Cameras
MP3 Players
Description:
The MCP7386X family of devices features highly
advanced linear charge management controllers for
use in space-limited, cost-sensitive applications. The
devices combine high-accuracy, constant voltage and
current regulation, cell preconditioning, cell
temperature monitoring, advanced safety timers,
automatic charge termination, internal current sensing,
reverse-blocking protection, charge status and fault
indication in either a space-saving 16-pin 4 x 4 QFN
package, or a 16-pin SOIC package. The MCP7386X
provides a complete, fully functional, stand-alone
charge management solution with a minimum number
of external components.
The MCP73861/3 is intended for applications utilizing
single-cell Lithium-Ion or Lithium-Polymer battery
packs, while the MCP73862/4 is intended for dual
series cell Lithium-Ion or Lithium-Polymer battery
packs. The MCP73861/3 has two selectable
voltage-regulation options available (4.1V and 4.2V),
for use with either coke or graphite anodes and operate
with an input voltage range of 4.5V to 12V. The
MCP73862/4 has two selectable voltage-regulation
options available (8.2V and 8.4V), for use with coke or
graphite anodes, and operate with an input voltage
range of 8.7V to 12V.
The MCP73861/2 and MCP73863/4 differ only in the
function of the charge status output (STAT1) when a
charge cycle has been completed. The MCP73861/2
flashes the output, while the MCP73863/4 turns the
output off. Refer to Section 5.2.1 “Charge Status
Outputs (STAT1, STAT2)”.
The MCP7386X family of devices are fully specified
over the ambient temperature range of -40°C to +85°C.
Advanced Single or Dual Cell, Fully Integrated Li-Ion/Li-Polymer
Charge Management Controllers
MCP73861/2/3/4
DS21893F-page 2 2004-2013 Microchip Technology Inc.
Package Types
VDD1
VBAT3
THERM
EN
TIMER
STAT1
STAT2 1
2
3
4
14
15
16
PROG
VDD2
VSET
VSS1
THREF
VBAT1
VBAT2
5
6
7
8 9
10
11
12
13
VSS2
VSS3
16-Pin SOIC16-Pin QFN
2
VDD2
VSS1
VSET VBAT3
VBAT2
PROG
VBAT1
THREF
THERM
TIMER
VSS3
STAT1
STAT2
EN
VSS2
VDD2 EP
16
1
15 14 13
3
4
12
11
10
9
5 6 7 8
17
2004-2013 Microchip Technology Inc. DS21893F-page 3
MCP73861/2/3/4
Typical Application
Functional Block Diagram
EN
STAT1
STAT2
VSET
VDD
VSS
TIMER
PROG
THERM
THREF
VBAT3
VBAT
+
Single
Lithium-Ion
Cell
2, 3
1
MCP73861/3
5
6
7
8
4, 9, 13
10, 11
12
14
16
15
5V
6.19 k
4.7µF
1.2A Lithium-Ion Battery Charger
4.7 µF
7.32 k
0.1
µF Note: Pin numbers shown are for QFN
package. Please refer to Section 6.0
“Applications” for details.
+
Charge
Termination
Comparator
Voltage Control
Amplifier
+
UVLO
COMPARATOR
VUVLO
+
Temperature
Comparators
+
Bias and
Reference
Generator
VUVLO
VREF (1.2V)
Power-On
Delay
+
+
VREF
VREF
Oscillator
IREG/12
Constant-Voltage/
Recharge Comp.
Precondition
Control
Charge_OK
Precon
VDD
Charge Current
Control Amplifier
+
VREF
VREF
+
Precondition
Comp.
Charge Control,
Charge Timers
And Status Logic Drv Stat 2
Drv Stat 1
Charge_OK
IREG
/12
VDD1
THERM
EN
TIMER
STAT1
STAT2
VBAT3
VSS1
PROG
VSET
THREF
VBAT1
90
110 k
10 k
10 k
100 k
50 k
50 k
G = 0.001
11 k
1 k
600 k
(1.65 M)
148.42 k
1.58 k
VDD2 VBAT2
300.04 k
10.3 k
(8.58 k)
4 k
Direction
Control
k
VSS2
VSS3
Values in ( )
reflect the
MCP73862/4
devices


Produktspezifikationen

Marke: Microchip
Kategorie: Nicht kategorisiert
Modell: MCP73862

Brauchst du Hilfe?

Wenn Sie Hilfe mit Microchip MCP73862 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Microchip

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-