Microchip HV9150 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Microchip HV9150 (20 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/20
2017-2019 Microchip Technology Inc. DS20005689B-page 1
HV9150
Features
• 6V to 500V Wide Output Voltage Range
• 2.7V Low Input Voltage
• 5W Maximum Output Power with External
MOSFET Driver
• Built-in Charge Pump Converter for the Gate
Driver
• Programmable Switching Frequency from 40 kHz
to 400 kHz
• Four Programmable Duty Cycles from 50% to
87.5%
• FB Return Ground Switch for Power-Saving
Applications
• Built-In Delay Timer for Internal Protection
• Non-Isolated DC/DC Converter
Applications
• Portable Electronic Equipment
• MEMS
• Printers
General Description
The HV9150 is a high output voltage Hysteretic mode
step-up DC/DC controller that has a built-in charge
pump converter and a linear regulator for a wide range
of input voltage. The Charge Pump Converter mode is
ideal for battery-powered applications. The internal
converter can provide a minimum of 5V gate driver
output voltage (at VIN = 2.7V) to the external N-channel
MOSFET. The range of 2.7V to 4.5V input supply
voltage is ideal for battery-powered applications, such
as portable electronic equipment. The internal linear
regulator is selected when a higher supply voltage rail
is available in the system.
A feedback return ground path switch is also integrated
into the device to minimize the quiescent current during
the controller shutdown. This feature provides power
savings for energy-critical applications.
In addition, a built-in timer is available to protect the
internal circuit and help dissipate the energy from the
external high-voltage storage capacitor. This device is
designed for systems requiring high-voltage and
low-current applications such as MEMS devices.
Package Type
Pads are at the bottom of the package. Center heat slug is at ground potential. See Table 3-1 for pin information.
16-lead QFN
(Top View)
VDD
GATE
FB_RTN
FB
VCONTROL
FREQ_ADJ
EXT_REF
CT
VLL
GND
EN
CP_EN
CCP1-
CCP1+
CCP2-
CCP2+
1
16
High-Voltage Output Hysteretic-Mode Step-Up DC/DC Controller
HV9150
DS20005689B-page 2 2017-2019 Microchip Technology Inc.
Functional Block Diagram
Delay
OSC
3x Charge Pump
Converter LDO
VREF
- +
Hysteretic Mode
Controller
VDD
VDD
VLL
VLL
VLL
VLL
CCP1+/- CCP2+/-VDD VLL
GNDCT
EN
FREQ_ADJ
VCONTROL
(Duty Cycle Adj)
CP_EN
GATE
EXT_REF
FP_RTN
FB
LDO
Mode
CP
Mode
2017-2019 Microchip Technology Inc. DS20005689B-page 3
HV9150
Typical Application Circuits
CCP2±
0.22μF
RFREQ
VOUT
6.0 - 500V
VIN
2.7 - 4.5V
GND
R1
R2
L
CT
Delay
OSC
VREF
3x Charge Pump
Converter LDO
CCP1±
0.22μF
VDD
0.22μF
VLL
1.0μF
CP_EN
- +
VLL
VLL
VLL
VDD
GATE
EXT_REF
FB_RTN
FB
EN
FREQ_ADJ
VCONTROL
0V/3.3V
VDD
LDO
Mode
CP
Mode
Charge Pump (CP) Mode
Linear Regulator (LDO) Mode
CCP2±
RFREQ
VOUT
15 - 500V
VIN
5.0 - 12V
GND
R1
R2
L
CT
Delay
OSC
VREF
3x Charge Pump
Converter LDO
CCP1±VDD VLL
CP_EN
- +
VLL
VLL
VLL
VDD
GATE
EXT_REF
FB_RTN
FB
EN
FREQ_ADJ
VCONTROL
0V/3.3V
VDD
1.0μF
LDO
Mode
CP
Mode


Produktspezifikationen

Marke: Microchip
Kategorie: Nicht kategorisiert
Modell: HV9150

Brauchst du Hilfe?

Wenn Sie Hilfe mit Microchip HV9150 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Microchip

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-