Microchip ATF1504BE Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Microchip ATF1504BE (9 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 38 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/9
Atmel-8909A-CPLD-ATDH1150USB-ATF15-JTAG-ISP-Download-Cable-UserGuide_072015
Introduction
The Atmel® ATF15xx Complex Programmable Logic Device (CPLD) USB-based JTAG ISP Download
Cable [Atmel PN: ATDH1150USB] connects to a standard USB port on a host computer on one side
and to a JTAG header of a programming circuit board on the other side. It transfers the JTAG
instructions and data generated by the ATMISP software running on the host PC to the Atmel ATF15xx
series CPLDs on the programming circuit board. The ATMISP software can be downloaded from the
Atmel website at . With this In-System Programming (ISP) http://www.atmel.com/tools/ATMISP.aspx
download cable and the ATMISP software, design changes can easily be downloaded directly to the
ATF15xx JTAG devices, resulting in easy prototyping of designs.
The ATDH1150USB cables are made by two vendors and have identical circuit design. The cables
labeled with “ATDH1150USB-K” are built by Kanda ( ) and can also be purchased www.kanda.com
directly from Kanda. When purchasing this cable from Atmel or an Atmel distributor, the Atmel ordering
code is “ATDH1150USB”.
Features
Supports Industry Standard IEEE 1149.1 (JTAG) Compliant Devices
Allows Users to Perform JTAG ISP of Atmel ATF15xx CPLDs
Supports Target Systems Using 5.0V, 3.3V, 2.5V, or 1.8V VCC and I/O Standards
Supported by the ATMISP Software (Version 6.6, 6.7, and 7.x)
Interfaces with a Standard USB 2.0/3.0 Port on a PC
Supports 10-pin and 14-pin JTAG Interface Headers (JTAG-A and JTAG-X)
Supports
The ATDH1150USB ISP Download Cable supports all ATF15xx CPLDs with the JTAG feature enabled.
By default, the ATF15xx CPLDs are shipped with the non-volatile memory in the erased state, which
would enable the JTAG feature. Once the JTAG feature of an ATF15xx is disabled by programming it
with a JEDEC file that disables the JTAG feature, its memory contents can no longer be accessed via
the JTAG port. To re-enable the JTAG feature, the ATF15xx CPLD will need to be erased on a stand-
alone device programmer.
ATDH1150USB
ATF15xx CPLD JTAG ISP Download Cable
USER GUIDE
ATDH1150USB – ATF15xx CPLD JTAG ISP Download Cable [USER GUIDE]
Atmel-8909A-CPLD-ATDH1150USB-ATF15-JTAG-ISP-Download-Cable-UserGuide_072015
2
Table of Contents
Functional Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Ordering Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Frequently Asked Questions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3ATDH1150USB – ATF15xx CPLD JTAG ISP Download Cable [USER GUIDE]
Atmel-8909A-CPLD-ATDH1150USB-ATF15-JTAG-ISP-Download-Cable-UserGuide_072015
Functional Description
The ATDH1150USB ISP Download Cable connects to the PC host’s USB port on one side using the
USB cable provided to communicate with ATMISP. On the other end, the cable is connected to a 10-
pin or 14-pin JTAG header on the programming circuit board using the 10-wire ribbon cable provided
or a 14-wire ribbon cable (not included) to communicate with the target JTAG devices. Users can
choose to use either one of the two JTAG connectors (JTAG-A and JTAG-X) available on the
ATDH1150USB based on their requirements; however, these two JTAG connectors should not be
used at the same time.
A functional block diagram of the ATDH1150USB ISP Download Cable is shown in the below figure,
and and provide the pin assignments and signal descriptions for the two JTAG Table 1 Table 2
connectors.
Figure 1. ATDH1150USB ISP Download Cable Functional Block Diagram
The second 10-pin header labeled on the ATDH1150USB is supported and should TWI not
not be used.
2, 10
4
1
FTDI
USB Transceiver
2
3
4
1
USB Connector
5
9
3
1, 3, 5, 7,
9, 11, 13
2
6
8
10
4
JTAG-A ConnectorJTAG-X Connector
VCCTVCCU VCCU


Produktspezifikationen

Marke: Microchip
Kategorie: Nicht kategorisiert
Modell: ATF1504BE

Brauchst du Hilfe?

Wenn Sie Hilfe mit Microchip ATF1504BE benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Microchip

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-