Micro Connect MC-HM-MT404L Bedienungsanleitung

Micro Connect Schalten MC-HM-MT404L

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Micro Connect MC-HM-MT404L (4 Seiten) in der Kategorie Schalten. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
12
INTRODUCTION:
FEATURES:
34
HDMI 2.0 4X4 Matrix Switcher 4:4:4
This 4x4 4K UHD Matrix provides a high level of audio and video performance with
support for resolutions up to 4K@60Hz (YUV 4:4:4, 8-bit) and pass-through support of
digital audio formats including LPCM 7.1 (with sampling rates up to 192kHz), bitstream,
and HD bitstream. The 4 HDMI inputs and 4 HDMI outputs support fully matrixed
switching. A sophisticated WebGUI interface supports storing and recalling up to four
routing presets, making remote control and configuration of the unit a breeze.
Before attempting to use this unit, please check the packaging and make sure the
following items are contained in the shipping carton:
1) Main unit.
2) 12 V/2A DC Power Supply.
3) Remote Control.
4) User’s Manual.
● HDMI inputs and outputs with 18Gbps (600MHz) 4K UHD support
● DVI 1.0 compliant with the use of an HDMI-DVI adaptor
● HDCP 1.4 and 2.2 compliant
● HDR 4:2:2 12 Bit Support
● Supports HD resolutions up to 3840x2160@60 Hz (YUV 4:4:4, 8-bit) &
4096x2160@60 Hz (YUV 4:4:4, 8-bit)
● Supports 48-bit Deep Color up to 1080p60
● Supports 3D signal bypass
● Supports pass-through of LPCM 7.1, bitstream and HD bitstream audio formats over
HDMI
● Supports storing and recall of up to four routing presets
● Controllable via front-panel buttons, RS-232, telnet, WebGUI, and IR remote
CONNECTION DIAGRAM:
OPERATION CONTROLS AND FUNCTIONS:
SPECIFICATIONS:
Note: Specifications are subject to change without notice.
PACKAGE CONTENTS:
Quick Installation Guide
Ver. 1.0
All brand names and trademarks are properties of
their respective owners
REMOTE CONTROL:
Remote control sensor
Input Select/Indicators (A):
Press the “HDMI OUT A” button repeatedly to switch to your desired source, and the LED
will illuminate to indicate which input source is being selected, and routed to HDMI A
display.
Input Select/Indicators (B):
Press the HDMI OUT B” button repeatedly to switch to your desired source, and the LED
will illuminate to indicate which input source is being selected, and routed to HDMI B
display.
Input Select/Indicators (C):
Press the HDMI OUT C” button repeatedly to switch to your desired source, and the LED
will illuminate to indicate which input source is being selected, and routed to HDMI C
display.
Input Select/Indicators (D):
Press the HDMI OUT D” button repeatedly to switch to your desired source, and the LED
will illuminate to indicate which input source is being selected, and routed to HDMI D
display.
Power Switch & LED Indicator:
The LED will illuminate when the power is turned on.
ON/OFF
Power
IR
1 2 3 4
Output A
Select
1 2 3 4
Output B
Select
1 2 3 4
Output C
Select
1 2 3 4
Output D
Select
① ②
Output D Output C Output B Output AInput4 Input3 Input2 Input1 RS232 Ethernet
12 V/DC, 2 A
Power:
Plug the 12V/2A DC power supply adapter into the unit and connect the adaptor to AC
wall outlet.
HDMI inputs 1~4:
Connect to the HDMI output of your source equipment such as DVD player or set-top-
box.
HDMI outputs A~D:
Connect each of these output ports to the HDMI input of an HDMI display.
RS232 Communication Port:
Connect to a PC or Laptop via RS232 terminal to D-Sub 9-pin cable for the
transmission of RS-232 commands.
Ethernet:
Connect to an internet or network activate device.
① ②
HDMI version
HDCP version
Video Bandwidth
HDMI resolution
supported
HDMI connector
Operation temperaure
Relative humidity
HDMI 2.0
HDCP 2.2
18G
1920*1080@60Hz
1920*1080 3D@24Hz
1080P@120Hz
4K2K@30Hz
4K2K@60Hz(4:2:0)
4K2K@50/60Hz(4:4:4)
Type A ,19 pin, Female
0 50℃~ ℃
0 95%(no condensation)
Power:
Press the button to turn on/off the unit.
Input Select for HDMI OUT A:
Press 1, 2, 3 or 4 to select the desired input source for
HDMI OUT A.
Input Select for HDMI OUT B:
Press 1, 2, 3 or 4 to select the desired input source for
HDMI OUT B.
Input Select for HDMI OUT C:
Press 1, 2, 3 or 4 to select the desired input source for
HDMI OUT C.
Blu-Ray DVD Player PS4
HD DVD STB
HD TV HD TV HD TVHD TV
Output D Output C Output B Output AInput4 Input3 Input2 Input1 RS232 Ethernet
12 V/DC, 2 A
RS232 Equipped
PC or Notebook
Routor
56
78
1.Use an Ethernet cable to connect the LAN port on the switch to an unused, active port
on the router.
2.Open “HDMI2.0 Matrix.exe”
3.select the “IP Host” and enter the IP address click “Start” button into PC Software
Control Interface
Note: see Web GUI Control below for how to get the IP address
At EDID Management interface, you can load default EDID to any input port, You can
also learn EDID from any output port to any input port
At the Route Setting interface, you can set any input port to any output port one by one,
or anyone input port to all output port.
PC Software Control
Connect by RS232
1. Connect PC to device by USB to RS232 tool
2. Open “HDMI2.0 Matrix.exe”
3. select the “comm” and click “Start” button into PC Software Control Interfac
Connect by LAN
PC Software Control Interface: Route Setting PC Software Control Interface: EDID Management
9 10
11 12
At System Information you can Upgrade the Firmware of Matrix Switch
NOTE: The Firmware File need to be supplied by the manufacturer
Use the step to quickly and immediately set User name and Password
Default User name : admin
Default Password : 123456
Set IP settings such as:
• Enable DHCP
• HostIP
• Net Mask
• Gateway
NOTE: Default IP setting is “Enable DHCP”
1.Use an Ethernet cable to connect the LAN port on the switch to an unused, active port
on the router.
2.Get the IP Address by CMD.exe
Enter ”ping matrix” into CMD windows as following picture shows
PC Software Control Interface: IP Setting PC Software Control Interface: System Information
Web GUI Control
3.Enter the IP Address into any web browser as following picture shows
4.Enter User name and Password to gogin the Web GUI
Default User name: admin default Password:123456
Web GUI Interface: Regist User name and Password


Produktspezifikationen

Marke: Micro Connect
Kategorie: Schalten
Modell: MC-HM-MT404L

Brauchst du Hilfe?

Wenn Sie Hilfe mit Micro Connect MC-HM-MT404L benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Schalten Micro Connect

Bedienungsanleitung Schalten

Neueste Bedienungsanleitung für -Kategorien-