Metra 99-7360B Bedienungsanleitung

Metra Empfänger 99-7360B

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Metra 99-7360B (8 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
APPLICATIONS
METRA. The World’s best kits.metraonline.com1-800-221-0932 © COPYRIGHT 2014 METRA ELECTRONICS CORPORATION
REV. 7/3/2014 INST99-7360B
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
INSTALLATION INSTRUCTIONS FOR PART 99-7360B
• ISO DIN radio provision with pocket
Painted matte black to match factory finish
A) Radio housing trim panel • B) Brackets • C) Pocket • D) (2) #8 x 3/8” pan-head Phillips screws
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: 70-7304 harness or HYBL-04 interface
Antenna Adapter: Not required
• Panel removal tool Phillips screwdriver
TOOLS REQUIRED
(Models without Navigation only)
A B C D
Dash Disassembly
Kia Soul 2014-up ................................................. 2
Kit Assembly
ISO DIN radio provision with pocket ...................... 3
Table of Contents
99-7360B
Dash Disassembly
1. Unsnap and remove the panel from
around the factory radio. (Figure A)
2. Remove four screws and remove
radio. (Figure B)
Continue to kit assembly
(Figure A) (Figure B)
99-7360B
Kit Assembly
ISO DIN radio provision
1. Mount the pocket to the brackets
with the (2) #8 x 3/8” Phillips
screws supplied. Note: Pins on
brackets will align with front
mounting hole of pocket.
(Figure A)
2. Slide the radio into the assembly
and secure with screws supplied
with the radio. (Figure B)
3. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from
Metra and/or AXXESS.
4. Mount the new radio assembly into
the dash, snap the Metra radio trim
panel over the radio assembly, and
reassemble dash in reverse order
of disassembly.
(Figure A) (Figure B)


Produktspezifikationen

Marke: Metra
Kategorie: Empfänger
Modell: 99-7360B

Brauchst du Hilfe?

Wenn Sie Hilfe mit Metra 99-7360B benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Empfänger Metra

Bedienungsanleitung Empfänger

Neueste Bedienungsanleitung für -Kategorien-