Mercury Mountaineer (2010) Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Mercury Mountaineer (2010) (2 Seiten) in der Kategorie Auto. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/2
4 Speed Control
To set the speed:
1. Press ON.
2. Accelerate to the
desired speed.
3. Press SET + or and take
your foot off the accelerator.
• To set a higher speed, press and hold SET + or
press SET + repeatedly until the desired speed
is reached.
• To set a lower speed, press and hold SET – or press
SET – repeatedly until the desired speed is reached.
• To return to a previously set speed, press RES.
• To turn off, press the brake pedal or press OFF.
5
Airbag Readiness Light
Illuminates briefly when the
ignition is turned on. If this light
fails to illuminate, remains on or
continues to flash after the
engine is started, contact your
authorized dealer for service as
soon as possible. A chime will also sound if there
is a malfunction in the indicator light.
6
Service Engine Soon Light
The service engine soon light
illuminates briefly when the
ignition is turned on. If it
remains on or is blinking after
the engine is started, the On
Board Diagnostics System
(OBD-II) has detected a malfunction. Drive in a
moderate fashion and contact your authorized
dealer as soon as possible.
7 Message Center
The message center displays
important vehicle information
through a constant monitoring of
vehicle systems and will display
features such as trip odometer,
compass, distance to empty,
average fuel economy and a language selector.
The system will also notify you of potential vehicle
problems with a display of system warnings.
8 Hazard Flasher Control
The hazard flasher is located
on the steering column, just
behind the steering wheel.
Press to activate front and rear
direction signals. Press again
to deactivate.
9 ABS Warning Light
The ABS light illuminates briefly
when the ignition is turned on.
If the ABS light remains on or
continues to flash, a malfunction
has been detected. Contact your
authorized dealer as soon as
possible. Normal braking (less ABS) is still
functional unless the brake warning light
is also illuminated.
10 Low Tire Pressure
Warning Light
This light illuminates when
the ignition is turned on. If the
light does not turn on or begins
to flash, contact your authorized
dealer as soon as possible. For
more information, please refer to Tire pressure
monitoring system (TPMS) in the Tires, Wheels
and Loading chapter of your Owner’s Guide.
11
Steering Wheel Controls
VOL +/- : Press to increase/
decrease volume levels.
l l : Press to access the
previous/next radio
station, CD track or
preset satellite radio channel.
MEDIA: Press repeatedly to access all possible
media sources.
VOICE: Press to access voice recognition,
if equipped.
: Press to access SYNC® phone features,
if equipped.
1 Headlamp Control
O: Turns the headlamps off.
: Turns on parking,
instrument panel, license
plate and tail lamps.
: Turns on headlamps.
Autolamps: Automatically turns the exterior
lamps on/off based on available daylight.
: Turns on fog lamps by pulling the control
towards you.
Panel Dimmer Control
Move to adjust the level of brightness on the
instrument panel when the exterior lights are on.
Move to the full right position to turn on the
interior lamps. Move to the left position to turn off
the lights.
2 Parking Brake Release
Pull the release lever to release the parking brake.
Driving with the parking brake engaged will cause
the brakes to wear
out prematurely and reduce fuel
economy.
The parking brake is not recommended
to stop a moving vehicle. However, if normal
brakes fail, the parking brake can be used to stop
your vehicle in an emergency. Because the parking
brake applies only the rear brakes, the vehicle’s
stopping distance will increase greatly and the
handling of your vehicle will be adversely affected.
3 Multi-function Lever
Rotate the end of the control
up/down to increase/decrease
the speed of the wipers.
Push the end of the stalk:
• quickly for a single swipe
without fluid.
• and hold briefly for three swipes with
washer fluid.
• and hold for a longer wash cycle.
To operate your rear window wiper, turn the rear
wiper control to 1 (intermittent speed), 2 (normal
speed) or O (off). For a rear wash cycle, rotate and
hold the rear wiper control to either position.
For better visibility, your headlamps will turn on
(during daylight) if your windshield wipers and
autolamps are on. For optimal wiper Note:
performance, clean your blades and glass regularly.
Refer to your Owner’s Guide for more information.
Universal Garage Door Opener (if equipped)
Your vehicle may be equipped with either the
Homelink® or Car2U® system which provides a way
to replace hand held transmitters with a single built
in device. The systems work to learn the frequency
codes that operate garage doors and some devices
within the home. For more information, refer to the
Driver Controls chapter in your Owner’s Guide.
Power Deployable Running Boards (if equipped)
The deployable running boards automatically
move when the doors are opened to assist with
entering and exiting the vehicle. With automatic
power deploy, the running boards will extend
down when the doors are opened, and with
automatic power stow, the running boards will
return to the stowed position when the doors
are closed.
To enable/disable the power running board
feature, refer to the Message Center section
of your Owner’s Guide.
2nd Row Seats: The second row seats
are designed for maximum utility. They
can be positioned in up to three unique
configurations: Upright (seating) position,
Cargo mode, and E-Z entry mode
(if equipped with 3rd row seat).
Folding down the 2nd row 60/40 seats
or bucket seats: (if equipped) Before
folding down the 2nd
row seats,
ensure that
no objects such as books,
purses,
or briefcases are
on the floor in front of or
under the seat. Lower 1.
the head restraints by
pulling on the strap. Locate the recline 2.
handle on the side of the seat cushion by
the door. Pull up on the handle and push 3.
the seatback forward toward the front of
the vehicle.
To place the 2nd row
60/40 seats in cargo
mode: (if equipped) with
a 3rd row seat) Fold 1.
down the 2nd row seat
as indicated previously in
“Folding down the 2nd
row 60/40 seats and
bucket seats.” Lift the 2.
cargo mode lever located
on the back of the seatback
to kneel the seat down
and get a flat loading
floor. A moderate force may be required to
move the seat forward and down.
To return to the upright (seating)
position from cargo mode: 1. Push the
seat rearward until the latch is engaged.
(A moderate force may be required to move
the seat). Return the seatback to the 2.
upright position.
To enter the 3rd row
seat: (if equipped)
1. Fold the seatback down
(as indicated previously)
and release the side
handle. Pull the side 2.
handle up again until
the rear of the seat releases from the floor.
3. Rotate the seat upward and away from
the 3rd row.
To return the 2nd row seat to the
upright (seating) position from E-Z entry
mode: 1. Push the seat rearward until it
latches to the floor. Bring the seat back 2.
to an upright position.
3rd Row Seats:
(if equipped) Before folding
the 3rd row seats, ensure that no objects
such as books, purses or briefcases are on
the seat cushions and that the seat belts are
unbuckled. Fold the head restraints down 1.
by pulling on the strap
located under the
restraint.
Pull up on the 2.
handle located behind
the seatback while
pushing the seatback
forward and
down into
the seat cushion.
To return the 3rd row seats to the
upright (seating) position: 1. Pull up on
the handle located on the seatback, rotating
the seatback upward until you hear a click,
locking it in the upright position. Lift up 2.
on the head restraint until it locks into its
original position.
3rd Row Power Folding Seats:
Ensure that
the head restraints are folded down. Use the
controls located in the rear cargo area on the
driver’s side to lower or raise the seat. Press
the bottom of the control (FOLD) to lower the
desired seatback. Press the top of the control
(UP) to raise the desired seatback.
Seating
Remote Entry System
The remote entry system allows you to lock or
unlock all vehicle doors and liftgate, open the
liftgate window without a key and activate the
panic alarm.
• Press once to lock all doors and the liftgate.
Press again within three seconds to confirm all
doors are closed and locked.
• Press once to unlock the driver’s door. Press
again within three seconds to unlock all doors.
• Press to activate the panic alarm. Press
again or turn the ignition on to deactivate.
• Press to unlatch the liftgate window.
• Car finder: Press twice within three seconds
to locate your vehicle. The horn will chirp and
the turn lamps will flash.
SYNC® (if equipped)
Your vehicle may be equipped
with SYNC® – a hands-free communications and
entertainment system with special phone and
media features. For more information, please
refer to the SYNC® Supplement or to the SYNC®
section in the Navigation Supplement. Please
also feel free to visit www.SyncMyRide.com.
INSTRUMENT PANEL
21 3 13 14
65 9 12
4 1110 15
7 8
Use extreme caution when using any device or feature that may take your attention off the road.
Your primary responsibility is the safe operation of the vehicle. Only use non-essential features
and devices when it is safe to do so.
12
Power Adjustable
Foot Pedals
(if equipped)
Press the bottom of the control
to move the pedals closer
to you or the top of the control
to move the pedals further
away from you. The pedals
should only be adjusted when the vehicle is
stopped and in Park (P).
13 Gearshift/Overdrive
(O/D) Control
Drive with the vehicle in
Overdrive (D) for the best fuel
economy. You can deactivate
overdrive by pressing the
transmission control switch on
the side of the shift handle. Use this during heavy
city traffic where you are continuously shifting
in and out of overdrive, hilly terrain, heavy loads,
trailer towing and when engine breaking is
required. To return to overdrive, simply press
the transmission control switch again.
14 AdvanceTrac® with
Roll Stability ControlTM
(RSC®) Stability
Enhancement System
Your vehicle is equipped with
an AdvanceTrac® stability system
helps you to maintain stability
and steerability of your vehicle during a variety
of road conditions. If your vehicle becomes stuck
in the snow, mud or sand, try turning off the
AdvanceTrac® system to allow wheel spin and help
increase momentum to dig the vehicle out. The
system defaults to on and the control will
illuminate when turned off.
15 Heated Seats (if equipped)
The heated seat control is
located in the lower center of
the instrument panel. To operate
the heated seats, push the
control to activate and push
again to deactivate.
Auxiliary Input Jack
Your vehicle is equipped
with an Auxiliary Input Jack
located inside the console
bin. This allows you to plug
and play auxiliary audio
devices. Press AUX repeatedly
on your audio system to access. When LINE IN
appears in the display, plug in your auxiliary audio
device. For more detailed information, please refer
to your Owner’s Guide.
USB Port (if equipped)
Your vehicle may be equipped with a USB port
inside your center console. This feature allows
you to plug in your media playing devices among
other options. For more detailed information,
please refer to the SYNC® supplement or the
SYNC® section of the Navigation Supplement.
Navigation System
(if equipped)
The mobile media
navigation system allows
you to record CDs, list to
your saved music and play
DVDs in addition to
navigating the vehicle. For more information,
refer to your Navigation supplement (if equipped).
Family Entertainment System (if equipped)
Your vehicle may be equipped with a Family
Entertainment System (rear seat DVD player with
wireless headphones and remote control). Refer
to your Owner’s Guide for more information on
the operation of your system.
Location of Spare Tire and Tools
If you get a flat tire while driving, do not
apply the brake heavily. Instead, gradually
decrease your speed. Hold the steering
wheel firmly and slowly move to a safe place
on the side of the road. Your vehicle is
equipped with a temporary spare tire located
under the vehicle, just forward of the rear
bumper. The temporary spare is designed for
emergency use only and should be replaced
as soon as possible. The jack and tools are
located under the carpeted floor panel in the
rear cargo area. For complete details on how
to change your tire, refer to the Roadside
Emergencies chapter in your Owner’s Guide.
Fuel Type and Tank Capacity
Your fuel tank capacity is 22.5 gallons
(85.2L). Your vehicle is designed to use
“Regular” unleaded gasoline with an octane
rating of 87. Do not use gasoline labeled
as “Regular” in high altitude areas that are
sold with octane ratings less than 87. Do
not use E85 fuels because your vehicle was
not designed to run on fuels with more than
10% ethanol.
Tire Pressure
Your tire pressure is properly set at the
dealership according to the recommended
specifications found on the Safety Compliance
Certification Label or Tire Label located on
the B-Pillar or the edge of the driver’s door.
Check your tire pressure at least once a
month and before long trips (including spare).
As an added safety feature, your vehicle
may be equipped with a Tire Pressure
Monitoring System (TPMS) that illuminates
a low tire pressure warning light when
one or more of your tires is significantly
under-inflated. Improperly inflated tires can
affect vehicle handling and can fail suddenly,
possibly resulting in loss of vehicle control.
Refer to the Tires, Wheels and Loading chapter
in your Owner’s Guide for more information
.
SOS Post-Crash Alert SystemTM
Your vehicle is equipped with the SOS
Post-Crash Alert SystemTM. This system
provides audible and visual alarms in the
event of a crash which causes the deployment
of airbags or the activation of the safety belt
pretensioners. The turn signals will flash and
the horn will sound. To deactivate the system,
press the hazard flasher control, or you can
press on your remote transmitter.
Fuel Pump Shut-Off Switch
The fuel pump shut-off switch is a device
intended to stop the electric fuel pump
when your vehicle has been involved in a
substantial jolt. The switch is located in the
passenger’s footwell, by the kick panel. After
a collision, if the engine cranks but does not
start, the fuel pump shut-off switch may
have been activated. For more information
regarding the fuel pump shut-
off switch,
refer to the Roadside Emergencies
chapter of
your Owner’s Guide.
Easy FuelTM ‘No Cap’ Fuel System
Your vehicle has a ‘no cap’ fuel system which
allows you to simply open the fuel filler door,
insert the nozzle and start fueling. Wait five
seconds from the time the refueling nozzle is
shut off until the nozzle is pulled back out of
the fill pipe to allow residual fuel in the nozzle
to drain into the tank. The Easy Fuel™ system
is self-sealing and therefore protected against
dust, dirt, water, snow and ice. If you need to
fill your fuel tank with a portable fuel container,
use the fuel funnel which is either attached to
the underside of the spare tire cover or with
the tire changing tools. Slowly insert the funnel
into the Easy Fuel™ system and fill the tank
with fuel from the container. When done,
clean the funnel or properly dispose of it. Extra
funnels can be purchased from your authorized
dealer. Do not use aftermarket funnels as they
will not work with the Easy Fuel™ system and
may cause damage.
Roadside Assistance
Your new Mercury Mountaineer comes
with the assurance and support of 24-hour
emergency roadside assistance. Roadside
assistance includes such services as: lockout
assistance, limited fuel delivery, battery jump
starts, changing a flat tire, towing, and
winch out. To receive roadside assistance
in the United States, call . 1 (800) 241-3673
In Canada, call . 1 (800) 665-2006
MERCURY MOUNTAINEER QUICK REFERENCE GUIDE
Ford Motor Company
Customer Relationship Center
P.O. Box 6248
Dearborn, MI 48121
1-800-392-3673 (FORD)
(TDD for the hearing impaired: 1-800-232-5952)
This Quick Reference Guide is not intended to
replace your Owner’s Guide which contains
more detailed information concerning the
features of your vehicle, as well as important
safety warnings designed to help reduce the risk
of injury to you and your occupants. Please read
your entire Owner’s Guide carefully as you begin
learning about your new vehicle and refer to
the appropriate sections when questions arise.
All information contained in this Quick Reference
Guide was accurate at the time of duplication.
We reserve the right to change features,
operation and/or functionality of any vehicle
specification at any time. Your Mercury
dealer is the best source for the most
current information.
For detailed operating and safety information,
please refer to your Owner’s Guide.
August 2010
First Printing
Quick Reference Guide
Mercury Mountaineer
Litho in U.S.A.
AL9J 19G217 AA CENTER CONSOLE
Dual Automatic Temperature Control (DATC) System (if equipped)
1 Driver/Passenger Side Temperature Control
Press to increase or decrease the temperature on the driver or passenger side of the vehicle.
Pressing the passenger side control will activate dual zone where the driver and passenger are
able to select their own individual settings. If the passenger side controls are not activated, the
driver side controls will determine the temperature setting for the entire vehicle (single zone).
2 Fan Speed
Press to increase or decrease fan speed.
3 DUAL
Press to activate dual zone mode where the driver and passenger have control of their individual
temperature settings. Press again to return to single zone where the driver’s settings will
determine the temperature for the entire vehicle.
4 AUTO
Press to engage full automatic operation. The system will automatically determine fan speed,
airflow distribution, A/C on or off and either outside or recirculated air to heat or cool the
vehicle to reach the desired temperature.
5 OFF
Outside air is shut out and the fan will not operate. If your vehicle is equipped with Note:
the auxiliary climate control system, the auxiliary fan can still operate with the front system off.
6 Manual Override Controls
Press to manually determine where airflow is directed. To return to fully automatic control,
press AUTO.
7 Windshield Defroster
Outside air is distributed through the windshield defroster vents.
8 Rear Window Defroster
Press to clear the rear window of thin ice and fog. The defroster turns off automatically after
ten minutes or when the ignition is turned off. To manually turn off the defroster before ten
minutes have passed, push the control again.
AM/FM In-Dash Six CD MP3 Satellite
Compatible Sound System
(if equipped)
A (Eject): Press and hold to auto eject all
CDs present in the system. Press and a
memory preset to eject from a specific slot.
B LOAD: Press LOAD and a memory preset
to load to a specific slot. Press and hold to
autoload up to six CDs.
C / (Tune/Disc selector): Press and
release to manually advance up/down the
radio frequency or to select a desired disc.
Press and hold for a fast advance through
radio frequencies.
D CD: Press to enter CD/MP3 mode. If a CD
is already loaded into the system, CD/MP3
play will begin where it ended last. If no CD
is loaded, NO DISC will appear in the display.
E AM/FM: Press to select AM/FM1/FM2
frequency band.
F
(Phone): If your vehicle is equipped
with SYNC®, press to access SYNC® PHONE
features. For more information, please refer
to the SYNC® supplement. If your vehicle is
not equipped with SYNC®, the display will
read NO PHONE.
SATELLITE RADIO CONTROLS (if equipped)
G AUX: Press repeatedly to cycle through
SAT1, SAT2, SAT3 (satellite radio mode,
if equipped), LINE IN (auxiliary audio
mode), SYNC® (if equipped) or FES/DVD
(if equipped).
Your vehicle may be equipped with satellite
radio. SIRIUS® Satellite Radio is a subscription
based satellite radio service that broadcasts
music, sports, news and entertainment
programming. For more information and
a complete list of SIRIUS® satellite radio
channels, visit www.sirius.com in the United
States, www.sirius-canada.ca in Canada,
or call SIRIUS® at 1–888–539–7474.
H MENU: Press when satellite radio (if
equipped) is active to access SATELLITE
RADIO MENU. Press OK and then / to
cycle through options of: Category, Save
Song, Delete Song, Delete all songs, and
Enable/Disable alerts. For more information
on these and other menu features, refer to
your Owner’s Guide.
I SEEK: Press to access the previous or the
next strong radio station, satellite radio
channel (if equipped) or CD track.
J TEXT/SCAN: Press and hold for a brief
sampling of radio stations or CD tracks.
Press again to stop. In CD/MP3 mode,
press to display track title, artist name and
disc title.
K REW (Rewind): Press to manually reverse
in a CD or MP3 track.
L FF (Fast forward): Press to manually
advance in a CD or MP3 track.
M FOLDER: In folder mode, press to access
the previous or next folder on MP3
discs, if available.
N SHUFFLE: Press to play the tracks on the
current disc in random order.
O / II (PLAY/PAUSE): Press in CD or FES
(DVD) mode to play or pause the current
CD/DVD.
OK - Your vehicle may be equipped with
special phone and media features. Refer
to the SYNC® supplement (if equipped) for
more information.
P Memory Presets: To set a station, select
frequency band AM/FM1/FM2, tune to a
station, press and hold a preset button (1-6)
until sound returns.
Essential Climate Information Control SystemAudio
4 5 7 8
1 2
A
B
E
H
I
K L MN O
F
I
C
D
G
J
1
3
20
10
P
6
Produktspezifikationen
| Marke: | Mercury |
| Kategorie: | Auto |
| Modell: | Mountaineer (2010) |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Mercury Mountaineer (2010) benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Auto Mercury
17 August 2024
15 August 2024
11 August 2024
11 August 2024
11 August 2024
8 August 2024
8 August 2024
6 August 2024
23 Mai 2024
19 Januar 2024
Bedienungsanleitung Auto
- Auto Mitsubishi
- Auto Cadillac
- Auto Pioneer
- Auto Hyundai
- Auto Tesla
- Auto Citroën
- Auto Skoda
- Auto Chevrolet
- Auto Jaguar
- Auto Peugeot
- Auto Mercedes-Benz
- Auto Acme
- Auto BMW
- Auto Honda
- Auto Infiniti
- Auto Audi
- Auto Jeep
- Auto Smart
- Auto Ford
- Auto Lexus
- Auto Volkswagen
- Auto Volvo
- Auto Toyota
- Auto Genesis
- Auto Kia
- Auto Porsche
- Auto Opel
- Auto Nissan
- Auto Suzuki
- Auto Seat
- Auto Subaru
- Auto RAM
- Auto Mini
- Auto Land Rover
- Auto Mazda
- Auto Dacia
- Auto Vauxhall
- Auto Buick
- Auto Renault
- Auto Fiat
- Auto Alfa Romeo
- Auto MG
- Auto Saturn
- Auto Dodge
- Auto DS
- Auto Lancia
- Auto Maserati
- Auto POLARIS
- Auto Polestar
- Auto Saab
- Auto Sharper Image
- Auto GEM
- Auto Chrysler
- Auto Pontiac
- Auto Lincoln
- Auto Rover
- Auto Tata
- Auto Acura
- Auto GMC
- Auto Mahindra
- Auto Scion
- Auto Lada
- Auto VDL
- Auto Abarth
- Auto Chery
Neueste Bedienungsanleitung für -Kategorien-
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
14 Oktober 2024
14 Oktober 2024
14 Oktober 2024