Meiko FV 40.2 G Bedienungsanleitung

Meiko Spülmaschine FV 40.2 G

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Meiko FV 40.2 G (20 Seiten) in der Kategorie Spülmaschine. Dieser Bedienungsanleitung war für 25 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/20

Rev. 9/10

MEIKO • 1349 Heil Quaker Blvd. • La Vergne, TN 37086 • Phone: (615) 399-6600 • (800) 55-MEIKO • Fax: (615) 399-6620

Undercounter High Temperature Sanitizing Glasswasher

(USA Version)

OWNER’S INSTALLATION, OPERATION AND

MAINTENANCE MANUAL

MODEL FV 40.2 G

Page 2

T ABLE OF CONTENTS

THE MEIKO MODEL FV 40.2 G DISHWASHER HAS BEEN DESIGNED

EXCLUSIVELY FOR THE WASHING OF GLASSWARE, DISHES, CUTLERY

AND KITCHEN UTENSILS IN A COMMERCIAL OR INSTITUTIONAL SETTING

AND MUST NOT BE USED FOR ANY OTHER PURPOSE.

3.11 Priming the Detergent and

Rinse Additive Lines ................................. 9

3.12 Checking for Correct Chemical

Concentration ............................................ 9

4. OPERATION ........................................ 11

4.1 Location and Description of Controls.......11

4.2 Startup ..................................................... 12

4.3 Loading ................................................... 12

4.4 Operation................................................. 13

4.5 Between Cycles ...................................... 13

4.6 Shutdown................................................. 13

5. CLEANING .......................................... 14

5.1 Daily Cleaning (or as required) ............... 14

5.2 Weekly Cleaning (or as required)........... 14

5.3 Exterior Cleaning (as required) ............... 15

5.4 Deliming (as required) ............................ 15

6. TROUBLESHOOTING ......................... 16

MEIKO reserves the right to change any specifications without notice at any time.

1. INTRODUCTION ................................... 3

1.1 Overview of Equipment ............................ 3

1.2 General Safety Information ........................ 3

2. TRANSPORT AND SHIPPING .............. 3

3. INSTALLATION ..................................... 4

3.1 Overview of Installation ............................. 4

3.2 Requirements Before Installation .............. 4

3.3 Uncrating, Positioning and Leveling ............ 5

3.4 Accessing the Utility Connections ............ 5

3.5 Main Electrical Supply Connection ........... 6

3.6 Dispensing System Overview .................. 6

3.7 Connecting Chemical Containers

or Dispensers ........................................... 7

3.8 Fresh Water Supply Connection ............... 8

3.9 Drain Hose Positioning ............................. 8

3.10 Final Assembly.......................................... 9

MEIKO ACCEPTS NO RESPONSIBILITY FOR DAMAGE TO THE APPLIANCE, SURROUNDING

EQUIPMENT OR ENVIRONMENT THAT IS CAUSED BY INAPPROPRIATE INSTALLATION OR

OPERATION, OR FROM ANY SERVICE THAT IS UNDERTAKEN BY NON-AUTHORIZED PERSONNEL,

OR FROM THE USE OF ANY PARTS EXCEPT THOSE THAT ARE APPROVED BY THE

MANUFACTURER. ANY SUCH INSTALLATION, USE OR SERVICE WILL IMMEDIATELY VOID THE

MANUFACTURER’S WARRANTY.

ANY MODIFICATIONS TO THE APPLIANCE THAT ARE PERFORMED WITHOUT THE WRITTEN

PERMISSION OF MEIKO WILL IMMEDIATELY VOID THE MANUFACTURER’S WARRANTY.

AN ELECTRICAL WIRING DIAGRAM IS LOCATED INSIDE THE

LOWER-FRONT COMPARTMENT OF THIS MACHINE.

MEIKO • 1349 Heil Quaker Blvd. • La Vergne, TN 37086

Phone: (615) 399-6600 • (800) 55-MEIKO • Fax: (615) 399-6620

www.meiko.us

Page 3

2 TRANSPORT HIPPING AND S

CAUTION

During shipping and installation, the

glasswasher may ONLY be positioned upright

or on its left side. Some water may remain in

the lines after pre-shipping testing. If the unit

is positioned in any manner EXCEPT upright

or on its left side, this water can affect the

operation of the water level sensor.

IMPORTANT

• Observe any notices on the crating

material that pertain to shipping.

• Use care when transporting the

equipment.

• As you unpack the equipment, check that

all components shown on the shipping

invoice are present and intact. Be sure to

check for shipping damage. If shipping

damage is present, call MEIKO Customer

Service at 1-800-868-3840, providing full

details on the customer, serial number and

extent of damage present. MEIKO will file

a freight claim based on this information.

WARNING!

In NO EVENT should a damaged

appliance be installed or operated!

SECTION 1 - INTRODUCTION

1.2 General Safety Information

The following symbols and headings are used

throughout this manual to indicate possible haz-

ards to persons or to the equipment. The sym-

bols and headings are shown in order of impor-

tance. The descriptive text following these head-

ings is italicized for easy recognition.

WARNING! Possible hazard to per-

sons, such as from elec-

trical shock, crushing, or

hot surfaces.

CAUTION Possible hazard to the

glasswasher or to other

equipment.

IMPORTANT Vital information or tips for

the installer or operator.

NOTE Information or tips for the

installer or operator.

1 INTRODUCTION

1.1 Overview of Equipment

The MEIKO Model FV 40.2 G is a commercial

glasswasher designed for cleaning glassware,

dishes, cutlery and kitchen utensils with a

minimum of employee intervention or

supervision.

A control keypad allows easy selection of three

different dishwashing cycles to accommodate

different levels of soiling. A digital display

permits easy monitoring of operation.

Other features of the unit that affect operation

include:

Auto Safe - An internal booster heater is

regulated by the electronic control system to

ensure a proper sanitizing final rinse

temperature, regardless of the incoming water

temperature.

Soft Start - The wash water is pumped at a

reduced pressure for the first few seconds of

the wash cycle. This protects the ware from

being moved or damaged by a sudden burst

of pressure.

Pumped Rinse - An internal rinse pump

ensures that the final rinse pressure is

constant.

Pumped Drain - Accommodates wall or floor

drains.

Aqua Stop - The unit will automatically shut

down if a water leak is detected.

For efficient and SAFE operation, be sure to

follow the installation and operating

instructions provided in this manual. In

particular, all safety symbols and notices on

the equipment and in the supplied

documentation must be followed.

IMPORTANT

The Model FV 40.2 G glasswasher has been

designed exclusively for the washing of

glassware, dishes, cutlery and kitchen utensils

in a commercial or institutional setting and must

not be used for any other purpose.

Produktspezifikationen

Marke:	Meiko
Kategorie:	Spülmaschine
Modell:	FV 40.2 G
Breite:	600 mm
Tiefe:	600 mm
Höhe:	750 mm
AC Eingangsspannung:	230 V
AC Eingangsfrequenz:	60 Hz
Eingebautes Display:	Nein
Verpackungsbreite:	711 mm
Verpackungstiefe:	737 mm
Verpackungshöhe:	940 mm
Paketgewicht:	93900 g
Geräteplatzierung:	Freistehend
Stromstärke:	43.2 A
Zykluszeit:	1.35 min
Geräuschpegel:	- dB
Türfarbe:	Edelstahl
Wasserverbrauch pro Zyklus:	2.5 l
Energieverbrauch pro Zyklus:	3.53 kWh
Anzahl Maßgedecke:	- Maßgedecke
Geschirrspülprogramme:	Glas/Filigran
Aquastop Funktion:	Ja
Temperatur (max):	82 °C
Produktgröße:	Kompakt
Bedienfeld Farbe:	Blue, Stainless steel
Art des Besteckeinsatzes:	Schublade
Verborgenes Heizelement:	Ja
AquaSensor Funktion:	Ja
Glasschutz:	Ja
Nachhaltigkeitszertifikate:	ENERGY STAR
Wasserkapazität:	Cold, Hot