MaxGear MAX 5073 super bass system Bedienungsanleitung
MaxGear
Verstärker
MAX 5073 super bass system
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für MaxGear MAX 5073 super bass system (28 Seiten) in der Kategorie Verstärker. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/28
MAX 5073
Super Bass System
INTRODUCTION
Amplifiers provide high-performance sound reinforcement for your mobile audio equipment. Its ver-
satility enables compatibility with optional Equalizers, Frequency Dividing Network Crossovers, and
other audio processors in a customized system. The Multi-Mode bridging capabilities allow flexibility
in hosting several different speaker configurations.
To achieve optimum performance. We suggest that your stereo components are installed by an aut-
horized MAXGEAR dealer. It is highly recommended that you read this Owners Manual before begin-
ning installation.
AMPLIFIER FEATURES
•SILVER RCA CONNECTORS
• DC TO DC CIRCUITRY
•POWER/PROTECTION LED
• GOLD PLATED SCREW CONNECTIONS
• THERMAL/SHORT/OVERLOAD PROTECTION CIRCUTIRY
• VARIABLE BASS BOOST (0-18Db)
•HI/LO SELECT SWITCH
•VARIABLE HPF/LPF CROSSOVER
• ADJUSTABLE INUT SENSITIVTY
• SUBSONIC FILTER 20-50HZ (V-317SX)
SUBWOOFER FEATURES
•5/8” MDF CONSTRUCTION
•HEAVY DUTY INDUSTRIAL CARPET
• HIGH POWER SUBWOOFERS
WARNING
High powered audio systems in a vehicle are capable of generating “live Concert” high levels of sound
pressure. Continued exposure to excessively high volume sound levels may cause hearing loss or
damage. Also, operation of a motor vehicle while listening to audio equipment at high volume levels
may impair your ability to hear external sounds such as; horns, warning signals, or emergency vehi-
cles, thus constituting to a potential traffic hazard.
MAX 5073
Super Bass System
MOUNTING YOUR AMPLIFIER
The mounting position of your Amplifier will have a great effect on its ability to dissipate the heat
generated during normal operation. It has an ample heat sink for heat dissipation, and is also design-
ed with a thermal shut-down protection circuit, making it reasonably tolerant of mounting variations.
Any configuration which allows moving air to be directed over the cooling fins will improve heat dis-
sipation dramatically. DO NOT enclose the amplifier in a small box or cover it so that air cannot flow
around the heat sink fins.
Temperatures in car trunks have been measured as high as 175 F (80 C) in the summer time. Since
the thermal shut-down point for the Amplifier is 185 F (85 C), it is easy to see that it must be moun-
ted for maximum cooling capability. To achieve maximum advantage of convection air flow in an
enclosed trunk, mount the amplifier in a vertical position, on a vertical surface.
Cooling requirements are considerably relaxed when mounting inside the passenger compartment
since the driver will not often allow temperatures to reach a critical point. Floor mounting under the
seat is usually satisfactory as long as there is at least 1 inch (2,5cm) above the Amplifier’s fins for
ventilation.
a. Select a suitable location that is convenient for mounting, is accessible for wiring, and has ample
room for air circulation and cooling.
b. Use the amplifier as a template to mark the mounting holes. Remove the Amplifier and drill 6 holes.
USE EXTREME CAUTION, INSPECT UNDERNEATH SURFACE BEFORE DRILLING.
c. Secure the Amplifier using the screws provided.
CONNECTING THE POWER
CAUTION! AS A PRECAUTION. IT IS ADVISABLE TO DISCONNECT THE VEHICLE’S BATTERY BEFORE
MAKING CONNCETIONG TO THE+12 VOLT SUPPLY WIRING.
10 GAUGE (or a large gauge of wire if planning for additional Amplifiers) wire is recommend the power
and ground wires. 20 Gauge, for the remote turn-on wire. Both types are available at most Mobile
Audio Dealers or installation Shops.
GROUND To Vehicle Chassis
Toavoid unwanted ignition noise caused by ground loops, it is essential that the Amplifier be groun-
ded to a clean, bare, metal surface of the vehicle’s chassis.
NOTE: GROUND WIRE SHOULD NOT BE EXTENDED MORE THAN 3 FT.(1 METER)
USING THIS METHOD CAN CAUSE TURN ON AND TRUN OFF TRANSIENTS (NOISE)
+12 Volt (Fused)Constant Power: To Battery (+)
Due to the power requirements of the Amplifier, this connection should be made directly to the posi-
tive (+) terminal of battery. For safety measures, install an in-line 50 Amp Fuse Holder(not
included)as close to the battery positive (+) terminal as possible, with an ampere rating not to exceed
the total value of fuses in amp.
Remote Turn-On Input: To Power Antenna output of Car Stereo
This Amplifier is turned “ON” remotely when the vehicle’s stereo is turned “ON”.
NOTE: IF YOUR RADIO DOES NOT HAVE A +12 VOLT OUTPUT LEAD WHEN THE RADIO IS TURNED
ON, “RMT” TERMINAL ON THE AMPLIFIER CAN BE CONNECTED TO VEHICLE’S ACCESSORY CIRCUIT
THAT IS LIVE WHEN THE KEY IS “ON”.
MAX 5073
Super Bass System
FEATURES & CONTROL
Remote Tun ON
TO Power Antenna
BATTERY
FUSE Holder
Near Battery
Ground
Chassis -!
Ground
Chassis
Produktspezifikationen
| Marke: | MaxGear |
| Kategorie: | Verstärker |
| Modell: | MAX 5073 super bass system |
Brauchst du Hilfe?
Wenn Sie Hilfe mit MaxGear MAX 5073 super bass system benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Verstärker MaxGear
26 August 2024
Bedienungsanleitung Verstärker
- Verstärker Nedis
- Verstärker Yamaha
- Verstärker Alecto
- Verstärker MarQuant
- Verstärker Kenwood
- Verstärker Pyle
- Verstärker Auna
- Verstärker Beyerdynamic
- Verstärker Denon
- Verstärker Pioneer
- Verstärker Geemarc
- Verstärker JBL
- Verstärker Onkyo
- Verstärker Technics
- Verstärker Hifonics
- Verstärker Novero
- Verstärker Fenton
- Verstärker Rotel
- Verstärker Harman Kardon
- Verstärker Marshall
- Verstärker Naim
- Verstärker Power Dynamics
- Verstärker Samson
- Verstärker Skytec
- Verstärker Tangent
- Verstärker Vonyx
- Verstärker NAD
- Verstärker Fender
- Verstärker Behringer
- Verstärker Marantz
- Verstärker Arcam
- Verstärker Luxman
- Verstärker Monacor
- Verstärker Sansui
- Verstärker TEAC
- Verstärker Classé
- Verstärker Sherwood
- Verstärker Humantechnik
- Verstärker Bluetech
- Verstärker Skytronic
- Verstärker Reloop
- Verstärker Eden
- Verstärker American Audio
- Verstärker Anthem
- Verstärker HQ Power
- Verstärker Ibiza Sound
- Verstärker McIntosh
- Verstärker Hartke
- Verstärker DAP Audio
- Verstärker Elektra
- Verstärker Engl
- Verstärker Iriver
- Verstärker Koda
- Verstärker Konig Electronic
- Verstärker Meridian
- Verstärker Peavy
- Verstärker Quadral
- Verstärker Randall
- Verstärker Stagg
- Verstärker UPC
- Verstärker Velodyne
- Verstärker IFi Audio
- Verstärker Amplicom
- Verstärker Ampeg
- Verstärker Citronic
- Verstärker Advance Acoustic
- Verstärker Mark Levinson
- Verstärker AB International
- Verstärker Alto Professional
- Verstärker Audica
- Verstärker Bellman
Neueste Bedienungsanleitung fĂĽr -Kategorien-
15 Oktober 2024
15 Oktober 2024
12 Oktober 2024
9 Oktober 2024
22 September 2024
19 September 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024