Maxell MP-JW3511 Bedienungsanleitung

Maxell Beamer MP-JW3511

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Maxell MP-JW3511 (22 Seiten) in der Kategorie Beamer. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/22
ENGLISH
1
LCD Projector
MP-JU4001
MP-JW4001/MP-JW4011
MP-JW3501/MP-JW3511
User's Manual (concise)
Thank you for purchasing this product.
This is the basic manual on the product. Visit our website to get the detailed
manuals ( , , Safety Guide Operating Guide Network Guide) and the latest
information on the product.
Check them before using the product, for safe use and utilization of the product.
For our website, see the attached sheet.
WARNING
Before using this product be sure to read all manuals for this product. After
reading them, store them in a safe place for future reference.
Heed all the warnings and cautions in the manuals or on the product.
Follow all the instructions in the manuals or on the product.
NOTE
In this manual, unless any comments are accompanied, “the manuals” means
all the documents provided with this product, and “the product” means this projector and
all the accessories came with the projector.
Contents
First of all 2 ...........................................
Graphical symbols explanation 2 .......
Important safety instructions 2 ...........
Electro-magnetic interference 4 .........
Laser warning 5 ..................................
Disposal of old equipment and
batteries only for European Union
and countries with
recycling systems 6 ..........................
Contents of package..........................7
Preparing for the remote control 8 ........
Arrangement 9 ......................................
Connecting with your devices 10 ..........
Connecting to a power supply 12 .........
Turning on the power 13 .......................
Adjusting the projector's elevator 14 ....
Displaying the picture 15 ......................
Turning o the power ....................... 16
Cleaning and replacing
the air lter ..................................... 17
Specications ..................................19
End user license agreement
for the product software 21 ................
Troubleshooting -
Warranty and after-service 22 ..........
2
First of all
Graphical symbols explanation
The following entries and graphical symbols are used for the manuals and the
product as follows, for safety purpose ngs beforehand and heed . Know their meani
them.
WARNING
This entry warns of a risk of serious personal injury or even death.
CAUTION This entry warns of a risk of personal injury or physical damage.
NOTICE This entry notices of fear of causing trouble.
WARNING/
CAUTION
High
pressure High voltage High
temperature
Do not shade the light Projector not for consumer use
Laser warning
RG2
RG2 caution Kensington lock
Alternating
current
Standby
(Power) On (Power) Video input
switching
Important safety instructions
The followings are important instructions for safely using this product. Be sure to
follow them always when handling the product. The manufacturer assumes no
responsibility for any damage caused by mishandling that is beyond normal usage
dened in these manuals of this projector.
WARNING
►Never use the product in or after an abnormality (for example, giving o
smoke, smelling strange, nding a foreign object inside, broken, and so on.)
If an abnormality should occur, unplug the projector urgently.
Situate the product away from children and pets.
Keep small parts away from children and pets. If swallowed, consult a
physician immediately for emergency treatment.
►Do not use the product during electrical storms.
Unplug the projector from the power outlet if the projector is not being used.
Do not open or remove any portion of the product, unless the manuals direct
it. For internal maintenance, leave it to your dealer or their service personnel.
(continued on next page)
ENGLISH
3
Important safety instructions (continued)
WARNING
►Use only the accessories specied or recommended by the manufacturer.
Do not modify the projector or accessories.
Do not let any things or any liquids enter to the inside of the product.
Do not get the product wet.
►Do not place the projector in the following place where oils or chemicals are
used:
- near the kitchen which oil smoke comes from
- oils such as machine oils or aromatic oils are used
- smoke or bubbles for a show or a performance are used
- solvents, medicines, or detergent volatiles or adheres
- corrosive gas is generated
Do not use adhesive such as threadlocker, lubricant and so on.
Oils adhere to the product due to oil smoke, resulting in re, electrical shock,
or malfunction.
Degradation of plastic harms the product, resulting in injury, re, electrical
shock, or malfunction due to falling from the ceiling, wall, or high mounted
position.
Do not apply a shock or pressure to this product.
- Do not place the product on an unstable place such as the uneven surface
or the leaned table.
- Ensure the product is stable. Place the projector so that it does not protrude
from the surface where the projector is placed on.
- Remove all the attachments including the power cord and cables, from the
projector when carrying the projector.
Do not look into the lens and the openings on the ile the light projector wh
source is on, since the projection ray may cause a trouble on your eyes.
Do not approach the exhaust vents, while the light source is on. Also after the
light source goes out, do not approach them for a while, since too hot.


Produktspezifikationen

Marke: Maxell
Kategorie: Beamer
Modell: MP-JW3511

Brauchst du Hilfe?

Wenn Sie Hilfe mit Maxell MP-JW3511 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Beamer Maxell

Bedienungsanleitung Beamer

Neueste Bedienungsanleitung für -Kategorien-