Master & Dynamic MW07 Bedienungsanleitung

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Master & Dynamic MW07 (7 Seiten) in der Kategorie Ohrhörer. Dieser Bedienungsanleitung war für 31 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/7
CONTROLS
VOL-
VOL+
PAUSE / PLAY
2X: SKIP FORWARD
HOLD WHILE IN EAR TO
ACTIVATE VOICE ASSISTANT
SKIP BACK3X:
Right Left
TRUE WIRELESS
EARPHONES
HOLD WHILE OUT OF EAR
TO ACTIVATE PAIRING
MULTI-FUNCTION
BUTTON
To insert your earphones follow these steps:
Tilt the earphone forward
with the ear tip resting
lightly in your ear canal.
Rotate the earphone down until
the ear tip forms a seal with
your ear canal and the fit wing
slips under your ear ridge.
Right
Your earphones come with small fit wings and medium ear tips attached.
For a more secure fit, choose the ear tips that form a seal with your ear
canal, and the fit wings that comfortably fit under your ear ridge. To
remove or attach the fit wings you must first remove the ear tips.
FIT WING OPTIONS
EAR TIP OPTIONS
BATTERY INDICATORS
Case charges to 50% in 15min;
100% in 40min
Full
Med
Low
EARPHONES
CASE
Your earphones hold 3.5 hours of listening time when fully charged. The charging
case holds an additional three full charges for your earphones. We recommend
placing your earphones inside the case when they are not in use, to ensure they
are charged to the fullest each time you begin to use them.
When you place the earphones inside the charging case and close the lid, the
earphones and case battery status will display after three seconds. The LED
indicators will display as amber before displaying your battery level status.
To charge the case, plug one end of the USB-C cable into the back of the case and
plug the other end into a power source. If you do not have a USB-C power source
you can use our supplied USB-C to USB-A adapter to use a USB-A power source.
The first time you take your earphones out of the case they will enter
pairing mode. The indicator light will slowly pulse. Access Bluetooth
settings on your source device, locate MW07 and connect. The light will
stop flashing and you will hear a tone to confirm successful pairing.
If you wish to pair to a different device, long press the button on the
right earphone while it is out of your ear until you see the indicator light
slowly pulse. You may then repeat the pairing process above.
PAIRING
PULSING
INDICATOR LIGHT
MULTI-FUNCTION
BUTTON
Right Left
CHARGING PADS
PROXIMITY
SENSOR

Produktspezifikationen

Marke: Master & Dynamic
Kategorie: Ohrhörer
Modell: MW07
Schutzfunktion: SpritzwassergeschĂĽtzt
USB Anschluss: Ja
Bluetooth: Ja
Bluetooth-Version: 4.2
Breite: 25 mm
Tiefe: 22.2 mm
Gewicht: 9 g
Mitgelieferte Kabel: USB Typ-C
Produkttyp: Kopfhörer
Empfohlene Nutzung: Anrufe/Musik
Headset-Typ: Binaural
Tragestil: im Ohr
Produktfarbe: Mehrfarbig
Internationale Schutzart (IP-Code): IPX4
3,5-mm-Anschluss: Nein
Ăśbertragungstechnik: True Wireless Stereo (TWS)
Position Kopfhörerlautsprecher: Im Ohr
Kopfhörerfrequenz: - Hz
Impedanz: - Ohm
Batteriebetrieben: Ja
Akku-/Batterietyp: Integrierte Batterie
Akkuladezeit: 1.5 h
Mikrofon-Typ: Eingebaut
Höhe: 28.3 mm
Ladegehäuse Abmessungen (BxTxH): 64.6 x 26.8 x 45.1 mm
Ladegehäuse Gewicht: 76 g
Extra Ohrknöpfe: Ja
Lautstärkeregler: Knopf
Plug & Play: Ja
Kabellose Reichweite: 20 m
Magnettyp: Beryllium
Treibereinheit: 10 mm
Ausrichtung des integrierten Mikrofons: Omnidirektional
OperationsschlĂĽssel: Volume +, Volume -
USB-Anschlusstyp: USB Typ-C
Intraural Ohrhörer Typ: Ohrhörer
Tragetasche: Ja
Kontinuierliche Audiowiedergabezeit: 3.5 h

Brauchst du Hilfe?

Wenn Sie Hilfe mit Master & Dynamic MW07 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Ohrhörer Master & Dynamic

Bedienungsanleitung Ohrhörer

Neueste Bedienungsanleitung fĂĽr -Kategorien-