Martin RoboColor III Bedienungsanleitung

Martin Nicht kategorisiert RoboColor III

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Martin RoboColor III (24 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/24
RoboColor III
u s e r m a n u a l
2 Introduction RoboColor III
I
NTRODUCTION
Congratulations on your choice of the RoboColor III system, designed and
manufactured by Martin Professional. The RoboColor III is a high performance,
automated color changing system, providing exciting possibilities for lighting
designers in many applications. The rugged construction combined with the
choice of high quality components ensures that your RoboColor III system will
perform reliably for many years to come.
S A F E T Y P R E C A U T I O N S
The RoboColor III is NOT for domestic use.
• Read user manual before use.
• For protection against dangerous electric shock, always ground (earth) the system
electrically, use only a source of AC power that complies with local building and
electrical codes, and do not expose the system to rain or moisture.
• Disconnect the system from AC power before removing any cover or part.
• Disconnect the system from AC power if the lamp blows. Allow the heads to cool
for 15 minutes before installing a new lamp.
• Do not illuminate surfaces within 30 cm (12 inches) of the heads.
• Do not place filters or other objects over the lenses.
• Keep all combustible materials (for example fabric, wood, paper) at least 30 cm
(12 inches) away from the heads. Keep flammable materials well away from the
heads.
• Provide a minimum clearance of 10 cm (4 inches) around the fans and air vents.
• Do not operate the system if the ambient temperature exceeds 40° C (104° F).
• When suspending the system above ground level, verify that the structure can
hold at least 10 times the weight of all installed devices, and secure the fixtures
with approved safety cables. Block access below the work area whenever
installing or removing the system.
• For protection against dangerous UV radiation, never operate the system with
missing and/or damaged covers or lenses, and do not stare into the light. Replace
any broken or cracked component immediately.
• Refer all service to a qualified technician.
P/N 35000050, Rev. C. Š 1996 - 1999 Martin Professional A/S, Denmark
User Manual Setting Up 3
S
ETTING
U
P
The RoboColor III system consists of the RoboColor III heads, which are the
color changing spotlights, and the RoboColor III controller, which drives the
heads. You can connect up to four heads to one controller.
Important! Do NOT connect RoboColor III heads directly to the mains supply.
Connect them only to a RoboColor III controller.
UNPACKING
The RoboColor III system includes the following items:
• RoboColor III heads with Martin 150 W Metal Halide discharge lamps
• Mounting bracket
• Fittings for mounting bracket (two lever handles and two metal washers)
• RoboColor III controller
• 5 meter XLR-XLR cable
• User manual
P R E P A R I N G H E A D S
S ecu re th e m o u nt i ng b r ac ke t
• The mounting bracket is already tted onto the head. Secure it with the two
metal washers and lever handles supplied.
First, t the metal
washer.
Then, secure
the lever handle.


Produktspezifikationen

Marke: Martin
Kategorie: Nicht kategorisiert
Modell: RoboColor III

Brauchst du Hilfe?

Wenn Sie Hilfe mit Martin RoboColor III benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Martin

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂźr -Kategorien-