Martin M2GO Bedienungsanleitung

Martin Erleichterung M2GO

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Martin M2GO (16 Seiten) in der Kategorie Erleichterung. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/16

INSTRUCTION MANUAL

Cordless Impact Wrench

TW004G

TW005G

ENGLISH: Original instructions

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: TW004G TW005G

Fastening capacities Standard bolt M10 - M20

High tensile bolt M10 - M16

Square drive 12.7 mm

No load speed (RPM) Max impact mode 0 - 3,200 min

-1

Hard impact mode 0 - 2,600 min

-1

Medium impact mode 0 - 1,800 min

-1

Soft impact mode 0 - 1,000 min

-1

Impacts per minute Max impact mode 0 - 4,000 min

-1

Hard impact mode 0 - 3,400 min

-1

Medium impact mode 0 - 2,600 min

-1

Soft impact mode 0 - 1,800 min

-1

Overall length 144 mm

Rated voltage D.C. 36 V - 40 V max

Net weight 1.9 - 2.2 kg

• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange

without notice.

• Specicationsmaydierfromcountrytocountry.

• Theweightmaydierdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-

est combination, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge and charger

Batterycartridge BL4025 / BL4040

Charger DC40RA

• Someofthebatterycartridgesandchargerslistedabovemaynotbeavailabledependingonyourregionof

residence.

WARNING: Only use the battery cartridges and chargers listed above.Useofanyotherbatterycartridges

andchargersmaycauseinjuryand/orre.

Symbols

Thefollowingsshowthesymbolswhichmaybeused

fortheequipment.Besurethatyouunderstandtheir

meaning before use.

Read instruction manual.

Ni-MH

Li-ion

OnlyforEUcountries

Do not dispose of electric equipment or

batterypacktogetherwithhouseholdwaste

material!

In observance of the European Directives,

on Waste Electric and Electronic

Equipment and Batteries and Accumulators

and Waste Batteries and Accumulators

and their implementation in accordance

with national laws, electric equipment and

batteriesandbatterypack(s)thathave

reached the end of their life must be col-

lectedseparatelyandreturnedtoanenvi-

ronmentallycompatiblerecyclingfacility.

Intended use

The tool is intended for fastening bolts and nuts.

Noise

ThetypicalA-weightednoiseleveldeterminedaccord-

ing to EN62841-2-2:

Model TW004G

Sound pressure level (L

pA) : 99 dB(A)

Sound power level (L

WA) : 110 dB (A)

Uncertainty(K):3dB(A)

Model TW005G

Sound pressure level (L

pA) : 99 dB(A)

Sound power level (L

WA) : 110 dB (A)

Uncertainty(K):3dB(A)

NOTE: The declared noise emission value(s) has

been measured in accordance with a standard test

methodandmaybeusedforcomparingonetoolwith

another.

NOTE: The declared noise emission value(s)

mayalsobeusedinapreliminaryassessmentof

exposure.

3 ENGLISH

WARNING: Wear ear protection.

WARNING:

The noise emission during actual

use of the power tool can dier from the declared

value(s) depending on the ways in which the tool is

used especially what kind of workpiece is processed.

WARNING:

Be sure to identify safety measures

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (tak-

ing account of all parts of the operating cycle such

as the times when the tool is switched o and when

it is running idle in addition to the trigger time).

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to EN62841-2-2:

Model TW004G

Work mode: impact tightening of fasteners of the maxi-

mumcapacityofthetool

Vibration emission (a

h) : 16.5 m/s2

Uncertainty(K):1.5m/s

Model TW005G

Work mode: impact tightening of fasteners of the maxi-

mumcapacityofthetool

Vibration emission (a

h) : 16.5 m/s2

Uncertainty(K):1.5m/s

NOTE: The declared vibration total value(s) has been

measured in accordance with a standard test method

andmaybeusedforcomparingonetoolwithanother.

NOTE:Thedeclaredvibrationtotalvalue(s)mayalso

beusedinapreliminaryassessmentofexposure.

WARNING:

The vibration emission during actual

use of the power tool can dier from the declared val-

ue(s) depending on the ways in which the tool is used

especially what kind of workpiece is processed.

WARNING:

Be sure to identify safety measures

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (tak-

ing account of all parts of the operating cycle such

as the times when the tool is switched o and when

it is running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

TheECdeclarationofconformityisincludedasAnnexA

to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings

WARNING: Read all safety warnings, instruc-

tions, illustrations and specications provided

with this power tool. Failure to follow all instructions

listedbelowmayresultinelectricshock,reand/or

seriousinjury.

Save all warnings and instruc-

tions for future reference.

Theterm"powertool"inthewarningsreferstoyour

mains-operated(corded)powertoolorbattery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive atmo-

spheres, such as in the presence of ammable

liquids, gases or dust. Power tools create sparks

whichmayignitethedustorfumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

youtolosecontrol.

Electrical safety

1. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodiedplugsandmatchingoutletswill

reduce risk of electric shock.

2. Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of elec-

tricshockifyourbodyisearthedorgrounded.

3. Do not expose power tools to rain or wet con-

ditions. Water entering a power tool will increase

the risk of electric shock.

4. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges

or moving parts. Damaged or entangled cords

increase the risk of electric shock.

When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a cord

suitable for outdoor use reduces the risk of electric shock.

6. If operating a power tool in a damp location

is unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD reduces

the risk of electric shock.

Power tools can produce electromagnetic elds

(EMF) that are not harmful to the user. However,

users of pacemakers and other similar medical

devices should contact the maker of their device and/

or doctor for advice before operating this power tool.

Personal safety

1. Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

under the inuence of drugs, alcohol or med-

ication. A moment of inattention while operating

powertoolsmayresultinseriouspersonalinjury.

2. Use personal protective equipment. Always

wear eye protection. Protective equipment such

asadustmask,non-skidsafetyshoes,hardhator

hearing protection used for appropriate conditions

willreducepersonalinjuries.

3. Prevent unintentional starting. Ensure the

switch is in the o-position before connecting

to power source and/or battery pack, picking

up or carrying the tool.Carryingpowertoolswith

yourngerontheswitchorenergisingpowertools

that have the switch on invites accidents.

Produktspezifikationen

Marke:	Martin
Kategorie:	Erleichterung
Modell:	M2GO

Brauchst du Hilfe?

Wenn Sie Hilfe mit Martin M2GO benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Erleichterung Martin

Martin ERA 700 Performance IP Bedienungsanleitung

29 August 2024

Martin Thrill Vertical Fogger Bedienungsanleitung

23 August 2024

Martin Freekie Bedienungsanleitung

22 August 2024

Martin P3-100 Bedienungsanleitung

22 August 2024

Martin MAC Ultra Wash Bedienungsanleitung

21 August 2024

Martin RUSH MH 4 Beam Bedienungsanleitung

21 August 2024

Martin RUSH Strobe 1 5x5 Bedienungsanleitung

21 August 2024

Martin ERA 600 Performance Bedienungsanleitung

21 August 2024

Martin ERA 400 Performance WRM Bedienungsanleitung

21 August 2024

Martin MAC 101 Bedienungsanleitung

21 August 2024

Bedienungsanleitung Erleichterung

Neueste Bedienungsanleitung für -Kategorien-

Goobay 30780 Bedienungsanleitung

16 Oktober 2024

AFX Grace GRCP07CBBK Bedienungsanleitung

13 Oktober 2024

AFX Point PNTP0107L30D1BK Bedienungsanleitung

13 Oktober 2024

Smartwares 20.003.54 Bedienungsanleitung

9 Oktober 2024

Neewer TL97C Bedienungsanleitung

8 Oktober 2024

Neewer SRP18C Bedienungsanleitung

8 Oktober 2024

Qtx Moonglow Bedienungsanleitung

7 Oktober 2024

Blumfeldt Shinecube XL Bedienungsanleitung

7 Oktober 2024

Qtx HPWash100 Bedienungsanleitung

6 Oktober 2024

BeamZ DJ X5 Bedienungsanleitung

5 Oktober 2024