Makita UH5570 Bedienungsanleitung
Makita
Heggenschaar
UH5570
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Makita UH5570 (12 Seiten) in der Kategorie Heggenschaar. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/12
1
ENGLISH
INSTRUCTION MANUAL
DOUBLE INSULATION
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Hedge Trimmer
UH4570
UH5570
UH6570
009277
2
ENGLISH
SPECIFICATIONS
Model UH4570 UH5570 UH6570
Blade length 450 mm 550 mm 650 mm
Strokes per minute (min-1) 1,600 1,600 1,600
Overall length 862 mm 970 mm 1,042 mm
Net weight 3.5 kg 3.6 kg 3.7 kg
Safety class /II
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
END201-4
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
ï½¥ Read instruction manual.
ï½¥ DOUBLE INSULATION
ï½¥ Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible
recycling facility.
ENE014-1
Intended use
The tool is intended for trimming hedges.
ENH020-1
EC-DECLARATION OF CONFORMITY
The undersigned, Kato, as authorized by, declare that
the MAKITA machines,
TYPE:
UH4570,UH5570,UH6570
complies with the standard safety and health
requirements of the pertinent EU guidelines:
EU machinery guideline 98/37/EC, Noise emission
2000/14/EG, EU EMC guideline 2004/108/EC.
The requirements of the above EU guidelines were
implemented chiefly on the basis of the following
standards: EN60745-2-15, EN 55014, EN61000. The
conformity assessment procedure 2000/14/EG was
performed per Annex V. The measured sound pressure
level (LpA): is 89.9 dB(A). The measured sound power
level (Lwa) is 97.9 dB(A). The guaranteed sound power
level (Ld) is 100 dB(A). Uncertainty (K) is 1.5 dB(A).
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745-2-15:
Vibration emission (ah, D): 6.7 m/s2
Uncertainty (K): 1.5 m/s2
Tomoyasu Kato CE2008
000230
Director
Responsible Manufacturer:
Makita Corporation
3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN
Authorized Representative in Europe:
Makita International Europe Ltd.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND
GEA005-2
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
3
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
8. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
9. If operating a power tool in a damp location is
unavoidable, use a ground fault circuit
interrupter (GFCI) protected supply. Use of an
GFCI reduces the risk of electric shock.
Personal safety
10. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or
medication. A moment of inattention while
operating power tools may result in serious
personal injury.
11. Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
will reduce personal injuries.
12. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. . Carrying power tools
with your finger on the switch or energising power
tools that have the switch on invites accidents.
13. Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
14. Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
15. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing, and gloves
away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving
parts.
16. If devices are provided for the connection of
dust extraction and collection facilities,
ensure these are connected and properly used.
Use of dust collection can reduce dust-related
hazards.
Power tool use and care
17. Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
18. Do not use the power tool if the switch does
not turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and
must be repaired.
19. Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
20. Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool. Power tools are
dangerous in the hands of untrained users.
21. Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
22. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
23. Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the power
tool for operations different from those intended
could result in a hazardous situation.
Service
24. Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
25. Follow instruction for lubricating and
changing accessories.
26. Keep handles dry, clean and free from oil and
grease.
Produktspezifikationen
| Marke: | Makita |
| Kategorie: | Heggenschaar |
| Modell: | UH5570 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Makita UH5570 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Heggenschaar Makita
20 September 2024
12 September 2024
10 August 2024
7 August 2024
5 August 2024
3 August 2024
1 August 2024
30 Juli 2024
28 Juli 2024
27 Juli 2024
Bedienungsanleitung Heggenschaar
- Heggenschaar Hanseatic
- Heggenschaar Bosch
- Heggenschaar Vonroc
- Heggenschaar Black And Decker
- Heggenschaar Cocraft
- Heggenschaar FERM
- Heggenschaar Ryobi
- Heggenschaar Skil
- Heggenschaar Topcraft
- Heggenschaar Trotec
- Heggenschaar DeWalt
- Heggenschaar Einhell
- Heggenschaar Worx
- Heggenschaar Hitachi
- Heggenschaar Fuxtec
- Heggenschaar Metabo
- Heggenschaar Kärcher
- Heggenschaar Güde
- Heggenschaar Levita
- Heggenschaar Meec Tools
- Heggenschaar Fieldmann
- Heggenschaar Husqvarna
- Heggenschaar Stihl
- Heggenschaar Pattfield
- Heggenschaar Honda
- Heggenschaar Cramer
- Heggenschaar Florabest
- Heggenschaar Grouw
- Heggenschaar Stiga
- Heggenschaar Greenworks
- Heggenschaar Zipper
- Heggenschaar Baumr-AG
- Heggenschaar Dolmar
- Heggenschaar AL-KO
- Heggenschaar Gardena
- Heggenschaar CMI
- Heggenschaar Wolf Garten
- Heggenschaar Craftsman
- Heggenschaar Powerplus
- Heggenschaar Echo
- Heggenschaar Toledo
- Heggenschaar McCulloch
- Heggenschaar Ozito
- Heggenschaar Sun Joe
- Heggenschaar Texas
- Heggenschaar VARO
- Heggenschaar Spear & Jackson
- Heggenschaar Efco
- Heggenschaar Eurogarden
- Heggenschaar Ferrex
- Heggenschaar Flymo
- Heggenschaar Garden Feelings
- Heggenschaar Gardenline
- Heggenschaar Gartenmeister
- Heggenschaar Grizzly
- Heggenschaar HURRICANE
- Heggenschaar Kibani
- Heggenschaar Lux Tools
- Heggenschaar McGregor
- Heggenschaar Shindaiwa
- Heggenschaar Tanaka
- Heggenschaar Powerworks
- Heggenschaar Sovereign
- Heggenschaar Challenge
- Heggenschaar Palmera
- Heggenschaar MacAllister
- Heggenschaar Jonsered
- Heggenschaar G-Technology
- Heggenschaar Anova
- Heggenschaar Yellow Garden Line
- Heggenschaar LawnMaster
- Heggenschaar Ergotools Pattfield
- Heggenschaar Bestgreen
- Heggenschaar Maruyama
- Heggenschaar Maxbear
Neueste Bedienungsanleitung für -Kategorien-
20 September 2024
17 September 2024
16 September 2024
16 September 2024
9 September 2024
7 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024