Makita TW161DSAJ Bedienungsanleitung
Makita
Schroefmachine
TW161DSAJ
Lesen Sie kostenlos die ๐ deutsche Bedienungsanleitung fรผr Makita TW161DSAJ (12 Seiten) in der Kategorie Schroefmachine. Dieser Bedienungsanleitung war fรผr 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/12
INSTRUCTION MANUAL
Cordless Impact Wrench
TW161D
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: TW161D
Fastening capacities Standard bolt M8 - M16
High tensile bolt M6 - M12
Square drive 12.7 mm
No load speed Hard impact mode 0 - 2,400 min
-1
Soft impact mode 0 - 1,300 min
-1
Impacts per minute Hard impact mode 0 - 3,600 min
-1
Soft impact mode 0 - 2,000 min
-1
Overall length 150 mm
Rated voltage D.C. 10.8 V - 12 V max
Net weight 1.0 - 1.2 kg
โข๎ Due๎to๎our๎continuing๎program๎of๎research๎and๎development,๎the๎speci๎ฟcations๎herein๎are๎subject๎to๎change๎
without notice.
โข๎ Speci๎ฟcations๎may๎differ๎from๎country๎to๎country.
โข๎ The๎weight๎may๎differ๎depending๎on๎the๎attachment(s),๎including๎the๎battery๎cartridge.๎The๎lightest๎and๎heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery๎cartridge BL1015 / BL1016 / BL1020B / BL1021B / BL1040B / BL1041B
Charger DC10SA / DC10SB / DC10WC / DC10WD / DC18RE
โข๎ Some๎of๎the๎battery๎cartridges๎and๎chargers๎listed๎above๎may๎not๎be๎available๎depending๎on๎your๎region๎of๎
residence.
WARNING: Only use the battery cartridges and chargers listed above.๎Use๎of๎any๎other๎battery๎cartridges๎
and๎chargers๎may๎cause๎injury๎and/or๎๎ฟre.
Symbols
The๎followings๎show๎the๎symbols๎used๎for๎the๎equip-
ment.๎Be๎sure๎that๎you๎understand๎their๎meaning๎before๎
use.
Read instruction manual.
Ni-MH
Li-ion
Only๎for๎EU๎countries
Do not dispose of electric equipment or
battery๎pack๎together๎with๎household๎waste๎
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries๎and๎battery๎pack(s)๎that๎have๎
reached the end of their life must be col-
lected๎separately๎and๎returned๎to๎an๎envi-
ronmentally๎compatible๎recycling๎facility.
Intended use
The tool is intended for fastening bolts and nuts.
Noise
The๎typical๎A-weighted๎noise๎level๎determined๎accord-
ing to EN62841-2-2:
Sound๎pressure๎level๎(L
pA)๎:๎93๎dB(A)
Sound๎power๎level๎(L
WA)๎:๎104๎dB๎(A)
Uncertainty๎(K)๎:๎3๎dB(A)
NOTE:๎The๎declared๎noise๎emission๎value(s)๎has๎
been measured in accordance with a standard test
method๎and๎may๎be๎used๎for๎comparing๎one๎tool๎with๎
another.
NOTE:๎The๎declared๎noise๎emission๎value(s)๎
may๎also๎be๎used๎in๎a๎preliminary๎assessment๎of๎
exposure.
WARNING: Wear ear protection.
WARNING: The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
3 ENGLISH
Vibration
The๎vibration๎total๎value๎(tri-axial๎vector๎sum)๎deter-
mined according to EN62841-2-2:
Work mode: impact tightening of fasteners of the maxi-
mum๎capacity๎of๎the๎tool
Vibration๎emission๎(a
h)๎:๎8.0๎m/s2
Uncertainty๎(K)๎:๎1.5๎m/s
2
NOTE:๎The๎declared๎vibration๎total๎value(s)๎has๎been๎
measured in accordance with a standard test method
and๎may๎be๎used๎for๎comparing๎one๎tool๎with๎another.
NOTE:๎The๎declared๎vibration๎total๎value(s)๎may๎also๎
be๎used๎in๎a๎preliminary๎assessment๎of๎exposure.
WARNING: The vibration emission during
actual use of the power tool can differ from the
declared value(s) depending on the ways in which
the tool is used especially what kind of workpiece
is processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
EC Declaration of Conformity
For European countries only
The๎EC๎declaration๎of๎conformity๎is๎included๎as๎Annex๎A๎
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings, instruc-
tions, illustrations and speci๎ฟcations provided
with this power tool. Failure to follow all instructions
listed๎below๎may๎result๎in๎electric๎shock,๎๎ฟre๎and/or๎
serious๎injury.
Save all warnings and instruc-
tions for future reference.
The๎term๎"power๎tool"๎in๎the๎warnings๎refers๎to๎your๎
mains-operated๎(corded)๎power๎tool๎or๎battery-operated๎
(cordless)๎power๎tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ๎ammable
liquids, gases or dust. Power tools create sparks
which๎may๎ignite๎the๎dust๎or๎fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you๎to๎lose๎control.
Electrical Safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodi๎ฟed๎plugs๎and๎matching๎outlets๎will๎
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric๎shock๎if๎your๎body๎is๎earthed๎or๎grounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
5. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
6. If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
7.
Power tools can produce electromagnetic ๎ฟelds
(EMF) that are not harmful to the user. However,
users of pacemakers and other similar medical
devices should contact the maker of their device and/
or doctor for advice before operating this power tool.
Personal Safety
1. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the in๎uence of drugs, alcohol or med-
ication. A moment of inattention while operating
power๎tools๎may๎result๎in๎serious๎personal๎injury.
2. Use personal protective equipment. Always
wear eye protection. Protective equipment such
as๎a๎dust๎mask,๎non-skid๎safety๎shoes,๎hard๎hat๎or๎
hearing protection used for appropriate conditions
will๎reduce๎personal๎injuries.
3. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool.๎Carrying๎power๎tools๎with๎
your๎๎ฟnger๎on๎the๎switch๎or๎energising๎power๎tools๎
that have the switch on invites accidents.
4. Remove any adjusting key or wrench before
turning the power tool on.๎A๎wrench๎or๎a๎key๎left๎
attached๎to๎a๎rotating๎part๎of๎the๎power๎tool๎may๎
result๎in๎personal๎injury.
5. Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
6. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away
from moving parts.๎Loose๎clothes,๎jewellery๎or๎
long hair can be caught in moving parts.
7. If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
Produktspezifikationen
Marke: | Makita |
Kategorie: | Schroefmachine |
Modell: | TW161DSAJ |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Makita TW161DSAJ benรถtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Schroefmachine Makita
15 September 2024
15 September 2024
15 September 2024
15 September 2024
15 September 2024
15 September 2024
14 September 2024
12 September 2024
12 September 2024
4 September 2024
Bedienungsanleitung Schroefmachine
- Schroefmachine Panasonic
- Schroefmachine Cotech
- Schroefmachine Bosch
- Schroefmachine Laserliner
- Schroefmachine Parkside
- Schroefmachine Vonroc
- Schroefmachine AEG
- Schroefmachine Powerfix
- Schroefmachine Black And Decker
- Schroefmachine Cocraft
- Schroefmachine FERM
- Schroefmachine Ryobi
- Schroefmachine Senco
- Schroefmachine Skil
- Schroefmachine Hilti
- Schroefmachine DeWalt
- Schroefmachine Einhell
- Schroefmachine Elu
- Schroefmachine Festool
- Schroefmachine Mafell
- Schroefmachine Worx
- Schroefmachine Tacklife
- Schroefmachine Hikoki
- Schroefmachine Hitachi
- Schroefmachine Hazet
- Schroefmachine Metabo
- Schroefmachine Stanley
- Schroefmachine Gรผde
- Schroefmachine Power Craft
- Schroefmachine Meec Tools
- Schroefmachine Dremel
- Schroefmachine Fieldmann
- Schroefmachine Dedra
- Schroefmachine Silverline
- Schroefmachine Facom
- Schroefmachine Greenworks
- Schroefmachine Yato
- Schroefmachine Pansam
- Schroefmachine Toolland
- Schroefmachine Batavia
- Schroefmachine Matrix
- Schroefmachine Milwaukee
- Schroefmachine Toolcraft
- Schroefmachine Fein
- Schroefmachine Ingersoll Rand
- Schroefmachine Craftsman
- Schroefmachine Powerplus
- Schroefmachine Alpha Tools
- Schroefmachine Ozito
- Schroefmachine Porter-Cable
- Schroefmachine Goon
- Schroefmachine Steren
- Schroefmachine Meister Craft
- Schroefmachine Einhell Bavaria
- Schroefmachine Wera
- Schroefmachine Rodcraft
- Schroefmachine Cleco
- Schroefmachine SW-Stahl
- Schroefmachine TAURUS Titanium
Neueste Bedienungsanleitung fรผr -Kategorien-
16 September 2024
15 September 2024
14 September 2024
14 September 2024
12 September 2024
11 September 2024
10 September 2024
9 September 2024
9 September 2024
7 September 2024