Makita HP1641K1X Bedienungsanleitung
Makita
boormachine
HP1641K1X
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Makita HP1641K1X (8 Seiten) in der Kategorie boormachine. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/8
![](https://manualstech.ams3.cdn.digitaloceanspaces.com/html/nl/makita/hp1641k1x/html/bg1.png)
1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
DOUBLE INSULATION
IMPORTANT: Read Before Using.
Hammer Drill
HP1640
HP1640F
HP1641
HP1641F
009237
![](https://manualstech.ams3.cdn.digitaloceanspaces.com/html/nl/makita/hp1641k1x/html/bg2.png)
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model HP1640/HP1640F/HP1641/HP1641F
Concrete 16 mm
Steel 13 mm
Capacities
Wood 30 mm
No load speed (min
-1) 0 - 2,800
Blows per minute 0 - 44,800
Overall length 303 mm
Net weight 2.0 kg
Safety class /II
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END201-5
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
ï½¥ Read instruction manual.
ï½¥ DOUBLE INSULATION
ï½¥ Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible
recycling facility.
ENE039-1
Intended use
The tool is intended for impact drilling in brick, concrete
and stone as well as for drilling without impact in wood,
metal, ceramic and plastic.
ENF002-1
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
For Model HP1640,HP1641,HP1641F
ENG102-3
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
pA) : 92 dB (A)
Sound power level (L
WA) : 103 dB (A)
Uncertainty (K) : 3 dB (A)
Wear ear protection
ENG203-2
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Work mode: impact drilling into concrete
Vibration emission (ah,ID
) : 19 m/s2
Uncertainty (K) : 2.0 m/s2
ENG301-1
Work mode : drilling into metal
Vibration emission (ah,D) : 2.5 m/s
2
Uncertainty (K) : 1.5 m/s2
ENG901-1
• The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
![](https://manualstech.ams3.cdn.digitaloceanspaces.com/html/nl/makita/hp1641k1x/html/bg3.png)
3
ENH101-17
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Hammer Drill
Model No./ Type: HP1640,HP1641,HP1641F
Conforms to the following European Directives:
2006/42/EC
They are manufactured in accordance with the following
standard or standardized documents:
EN60745
The Technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
31.12.2013
000331
Yasushi Fukaya
Director
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
GEA005-3
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
8. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
9. If operating a power tool in a damp location is
unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
10. Use of power supply via a RCD with a rated
residual current of 30mA or less is always
recommended.
Personal safety
11. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or
medication. A moment of inattention while
operating power tools may result in serious
personal injury.
12. Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
will reduce personal injuries.
13. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools
with your finger on the switch or energising power
tools that have the switch on invites accidents.
14. Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
15. Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
16. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing, and gloves
away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving
parts.
Produktspezifikationen
Marke: | Makita |
Kategorie: | boormachine |
Modell: | HP1641K1X |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Makita HP1641K1X benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung boormachine Makita
![Makita](/images/logos/makita.png)
8 September 2024
![Makita](/images/logos/makita.png)
25 August 2024
![Makita](/images/logos/makita.png)
21 August 2024
![Makita](/images/logos/makita.png)
16 August 2024
![Makita](/images/logos/makita.png)
15 August 2024
![Makita](/images/logos/makita.png)
13 August 2024
![Makita](/images/logos/makita.png)
12 August 2024
![Makita](/images/logos/makita.png)
10 August 2024
![Makita](/images/logos/makita.png)
10 August 2024
![Makita](/images/logos/makita.png)
9 August 2024
Bedienungsanleitung boormachine
- boormachine Panasonic
- boormachine Cotech
- boormachine Bosch
- boormachine Flex
- boormachine Parkside
- boormachine Vonroc
- boormachine AEG
- boormachine Velleman
- boormachine Powerfix
- boormachine Black And Decker
- boormachine Cocraft
- boormachine FERM
- boormachine Ryobi
- boormachine Skil
- boormachine Topcraft
- boormachine Trotec
- boormachine Maestro
- boormachine Carat
- boormachine Eibenstock
- boormachine Hilti
- boormachine Bort
- boormachine DeWalt
- boormachine Einhell
- boormachine Elu
- boormachine Festool
- boormachine Mafell
- boormachine Maktec
- boormachine Worx
- boormachine Hikoki
- boormachine Hitachi
- boormachine Hazet
- boormachine Kress
- boormachine Max
- boormachine Metabo
- boormachine Stanley
- boormachine Würth
- boormachine Güde
- boormachine Power Craft
- boormachine Scheppach
- boormachine Workzone
- boormachine Meec Tools
- boormachine Dremel
- boormachine Fieldmann
- boormachine EcoMAC
- boormachine Proxxon
- boormachine Westfalia
- boormachine Dedra
- boormachine DURO
- boormachine Graphite
- boormachine Silverline
- boormachine Holzmann
- boormachine Huvema
- boormachine Robust
- boormachine Stomer
- boormachine Yato
- boormachine Baumr-AG
- boormachine Genesis
- boormachine Toolland
- boormachine Batavia
- boormachine Bavaria
- boormachine Brüder Mannesmann
- boormachine Milwaukee
- boormachine Fein
- boormachine Craftsman
- boormachine Powerplus
- boormachine Rupes
- boormachine ProfiTech
- boormachine Alpha Tools
- boormachine Ozito
- boormachine Kawasaki
- boormachine Sun Joe
- boormachine Ridgid
- boormachine Porter-Cable
- boormachine Economy
- boormachine Fe Powertools
- boormachine Gamma
- boormachine Global
- boormachine Lux Tools
- boormachine Max Bahr
- boormachine Protool
- boormachine Spit
- boormachine Steren
- boormachine Tanaka
- boormachine Meister Craft
- boormachine Malmbergs
- boormachine RIKON
- boormachine Kreg
- boormachine Einhell Bavaria
- boormachine Powerblade
- boormachine Rok
- boormachine Tryton
- boormachine MyTool
- boormachine McKenzie
- boormachine Rodcraft
- boormachine Black Decker
Neueste Bedienungsanleitung für -Kategorien-
![Black And Decker](/images/pdf_free.png)
8 September 2024
![Milwaukee](/images/pdf_free.png)
8 September 2024
![Black And Decker](/images/pdf_free.png)
8 September 2024
![Fein](/images/pdf_free.png)
8 September 2024
![Einhell](/images/pdf_free.png)
7 September 2024
![Einhell](/images/pdf_free.png)
6 September 2024
![ProfiTech](/images/pdf_free.png)
6 September 2024
![DeWalt](/images/logos/dewalt.png)
6 September 2024
![DeWalt](/images/logos/dewalt.png)
6 September 2024
![Stanley](/images/pdf_free.png)
6 September 2024