Makita GA9020 Bedienungsanleitung

Makita Schleifer GA9020

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Makita GA9020 (16 Seiten) in der Kategorie Schleifer. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/16

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

IMPORTANT: Read Before Using.

Angle Grinder

GA7020

GA7020S

GA7021

GA9020

GA9020S

010853

ENGLISH (Original instructions)

SPECIFICATIONS

Model GA7020 GA7020S GA7021 GA9020 GA9020S

Depressed center wheel diameter 180 mm 180 mm 230 mm

Max. wheel thickness 6.5 mm 6.5 mm 6.5 mm 6.5 mm 6.5 mm

Spindle thread M14 or 5/8"

(country specific)

M14 or 5/8"

(country specific)

M14 or 5/8"

(country specific)

Rated speed (n) / No load speed (n

0) 8,500 min-1 6,600 min-1 6,600 min-1

Overall length 473 mm 473 mm 473 mm

Net weight 5.5 kg 5.7 kg 5.5 kg 5.8 kg 5.9 kg

Safety class /II

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END202-7

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Wear safety glasses.

･ Only for EU countries

Do not dispose of electric equipment

together with household waste

material!

In observance of European Directive

2012/19/EU on waste electric and

electronic equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible

recycling facility.

ENE048-1

Intended use

The tool is intended for grinding, sanding and cutting of

metal and stone materials without the use of water.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated and can, therefore, also be used

from sockets without earth wire.

ENF100-1

For public low-voltage distribution systems of

between 220 V and 250 V.

Switching operations of electric apparatus cause voltage

fluctuations. The operation of this device under unfavorable

mains conditions can have adverse effects to the operation

of other equipment. With a mains impedance equal or less

than 0.27 Ohms it can be presumed that there will be no

negative effects. The mains socket used for this device must

be protected with a fuse or protective circuit breaker having

slow tripping characteristics.

ENG905-1

Noise

The typical A-weighted noise level determined

according to EN60745:

Sound pressure level (L

pA) : 89 dB (A)

Sound power level (L

WA) : 100 dB (A)

Uncertainty (K) : 3 dB (A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745:

Model GA7020,GA7020S

Work mode : surface grinding with normal side

grip

Vibration emission (ah,AG) : 8.5 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode : surface grinding with anti vibration

side grip

Vibration emission (ah,AG) : 8.0 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode : disc sanding

Vibration emission (ah,DS) : 2.5 m/s2

Uncertainty (K) : 1.5 m/s

Model GA7021

Work mode : surface grinding with normal side

grip

Vibration emission (ah,AG

) : 5.0 m/s2

Uncertainty (K) : 1.5 m/s

Work mode : surface grinding with anti vibration

side grip

Vibration emission (ah,AG

) : 4.5 m/s2

Uncertainty (K) : 1.5 m/s

Work mode: disc sanding

Vibration emission (ah,DS) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s

Model GA9020,GA9020S

Work mode : surface grinding

Vibration emission (ah,AG

) : 5.5 m/s2

Uncertainty (K) : 1.5 m/s

Work mode: disc sanding

Vibration emission (ah,DS) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s

ENG902-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

• The declared vibration emission value is used for

main applications of the power tool. However if the

power tool is used for other applications, the

vibration emission value may be different.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

ENH101-17

For European countries only

EC Declaration of Conformity

Makita declares that the following Machine(s):

Designation of Machine:

Angle Grinder

Model No./ Type: GA7020, GA7020S, GA7021, GA9020,

GA9020S

Conforms to the following European Directives:

2006/42/EC

They are manufactured in accordance with the following

standard or standardized documents:

EN60745

The technical file in accordance with 2006/42/EC is

available from:

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

31.12.2013

000331

Yasushi Fukaya

Director

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

GEA005-3

General Power Tool Safety

Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and

instructions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Produktspezifikationen

Marke:	Makita
Kategorie:	Schleifer
Modell:	GA9020
Breite:	249 mm
Gewicht:	5800 g
Produktfarbe:	Black, Blue, Silver
Höhe:	473 mm
Eingangsleistung:	2200 W
Energiequelle:	AC
Länge (mm):	140 mm
Leerlaufdrehzahl (max.):	6600 RPM
Spindelfaden:	M14
Schleifscheibendurchmesser:	230 mm