Makita DUR368APG2 Bedienungsanleitung
Makita
Schneidemaschine
DUR368APG2
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Makita DUR368APG2 (28 Seiten) in der Kategorie Schneidemaschine. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/28
INSTRUCTION MANUAL
Cordless Grass Trimmer
DUR368A
DUR368L
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: DUR368A DUR368L
Handle type Bike handle Loop handle
No load speed
(at each rotation speed level)
Cutter blade / Nylon cutting
head / Plastic blade
3: 6,500 min-1
2: 5,300 min-1
1: 3,500 min-1
Overall length
(without cutting tool)
1,758 mm
Nylon cord diameter 2.0 - 2.4 mm
Applicable cutting tool and
cutting diameter
3-tooth blade
(P/N: 195298-3)
230 mm
4-tooth blade
(P/N: B-14118)
230 mm
8-tooth blade
(P/N: B-14130)
230 mm
Nylon cutting head
(P/N: 198893-8)
350 mm
Plastic blade
(P/N: 198383-1)
255 mm
Rated voltage D.C. 36 V
Net weight 4.1 - 4.7 kg 3.9 - 4.5 kg
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsmaydifferfromcountrytocountry.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge, battery adapter and charger
Battery cartridge BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
Battery Adapter BAP182 / BL36120A
Charger
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF / DC18SH
• Some of the battery cartridges, battery adapters and chargers listed above may not be available depending on
your region of residence.
WARNING: Only use the battery cartridges, battery adapters and chargers listed above. Use of any
otherbatterycartridges,batteryadaptersandchargersmaycauseinjuryand/orre.
Noise
Applicable standard : ISO22868
Model DUR368A
Cutting tool Sound pressure level (LpA)
dB(A)
Sound power level (LWA)
dB(A)
LpA dB(A)
Uncertainty (K)
dB(A)
LWA dB(A)
Uncertainty (K)
dB(A)
4-tooth blade 74.7 1.0 89.2 1.6
Nylon cutting head 76.4 1.6 89 1.0
Plastic blade 75.1 0.3 86 0.4
3 ENGLISH
Model DUR368L
Cutting tool Sound pressure level (LpA)
dB(A)
Sound power level (LWA)
dB(A)
LpA dB(A)
Uncertainty (K)
dB(A)
LWA dB(A)
Uncertainty (K)
dB(A)
4-tooth blade 74.7 1.0 89.2 1.6
Nylon cutting head 76.4 1.6 89 1.0
Plastic blade 75.1 0.3 86 0.4
• Even if the sound pressure level listed above is 80 dB (A) or less, the level under working may exceed 80 dB
(A). Wear ear protection.
NOTE: The declared noise emission value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared noise emission value(s) may also be used in a preliminary assessment of exposure.
WARNING: Wear ear protection.
WARNING: The noise emission during actual use of the power tool can differ from the declared val-
ue(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the trigger time).
Vibration
Applicable standard : ISO22867
Model DUR368A
Cutting tool Left hand Right hand
ah,W (m/s2 ) Uncertainty K
(m/s2)
ah,W (m/s2 ) Uncertainty K
(m/s2)
4-tooth blade 2.5 1.5 2.5 1.5
Nylon cutting head 2.5 1.5 2.5 1.5
Plastic blade 2.5 1.5 2.5 1.5
Model DUR368L
Cutting tool Left hand Right hand
ah,W (m/s2 ) Uncertainty K
(m/s2)
ah,W (m/s2 ) Uncertainty K
(m/s2)
4-tooth blade 2.5 1.5 2.5 1.5
Nylon cutting head 2.5 1.5 2.5 1.5
Plastic blade 2.5 1.5 2.5 1.5
NOTE: The declared vibration total value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also be used in a preliminary assessment of exposure.
WARNING: The vibration emission during actual use of the power tool can differ from the declared
value(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the trigger time).
Produktspezifikationen
| Marke: | Makita |
| Kategorie: | Schneidemaschine |
| Modell: | DUR368APG2 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Makita DUR368APG2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Schneidemaschine Makita
19 August 2024
6 August 2024
4 August 2024
26 Juli 2024
26 Juli 2024
21 Juli 2024
20 Juli 2024
19 Juli 2024
16 Juli 2024
14 Juli 2024
Bedienungsanleitung Schneidemaschine
- Schneidemaschine Clatronic
- Schneidemaschine Domo
- Schneidemaschine G3 Ferrari
- Schneidemaschine Coline
- Schneidemaschine Ernesto
- Schneidemaschine Tristar
- Schneidemaschine Genius
- Schneidemaschine SilverCrest
- Schneidemaschine Sunbeam
- Schneidemaschine Clas Ohlson
- Schneidemaschine Quigg
- Schneidemaschine Beper
- Schneidemaschine Bestron
- Schneidemaschine Camry
- Schneidemaschine Princess
- Schneidemaschine Royal Catering
- Schneidemaschine Trisa
- Schneidemaschine Bosch
- Schneidemaschine Parkside
- Schneidemaschine Ambiano
- Schneidemaschine Arendo
- Schneidemaschine Siemens
- Schneidemaschine Bifinett
- Schneidemaschine Electrolux
- Schneidemaschine Fagor
- Schneidemaschine Gorenje
- Schneidemaschine Jata
- Schneidemaschine Proficook
- Schneidemaschine Rommelsbacher
- Schneidemaschine Sammic
- Schneidemaschine Severin
- Schneidemaschine Unold
- Schneidemaschine Bomann
- Schneidemaschine Gastroback
- Schneidemaschine H.Koenig
- Schneidemaschine Hendi
- Schneidemaschine Korona
- Schneidemaschine Melissa
- Schneidemaschine OK
- Schneidemaschine Russell Hobbs
- Schneidemaschine Switch On
- Schneidemaschine Tefal
- Schneidemaschine Vox
- Schneidemaschine Powerfix
- Schneidemaschine ADE
- Schneidemaschine ECG
- Schneidemaschine Black And Decker
- Schneidemaschine Skil
- Schneidemaschine Blaupunkt
- Schneidemaschine Cuisinart
- Schneidemaschine Eldom
- Schneidemaschine Eta
- Schneidemaschine Fritel
- Schneidemaschine Graef
- Schneidemaschine Heinner
- Schneidemaschine Kenwood
- Schneidemaschine Krups
- Schneidemaschine Trebs
- Schneidemaschine Wilfa
- Schneidemaschine Festool
- Schneidemaschine Exquisit
- Schneidemaschine Bartscher
- Schneidemaschine MACH
- Schneidemaschine Philco
- Schneidemaschine Hikoki
- Schneidemaschine Hyundai
- Schneidemaschine Magimix
- Schneidemaschine Livoo
- Schneidemaschine Kinzo
- Schneidemaschine Perel
- Schneidemaschine Beem
- Schneidemaschine Mia
- Schneidemaschine Ritter
- Schneidemaschine Sencor
- Schneidemaschine Turmix
- Schneidemaschine Ariete
- Schneidemaschine Efbe-Schott
- Schneidemaschine Kalorik
- Schneidemaschine Rotel
- Schneidemaschine Saro
- Schneidemaschine Ufesa
- Schneidemaschine Dremel
- Schneidemaschine Westfalia
- Schneidemaschine De Buyer
- Schneidemaschine ICES
- Schneidemaschine Brother
- Schneidemaschine MPM
- Schneidemaschine Team
- Schneidemaschine Venga
- Schneidemaschine JAC
- Schneidemaschine Wabäma
- Schneidemaschine Brandson
- Schneidemaschine JML
- Schneidemaschine Waves
- Schneidemaschine Zelmer
- Schneidemaschine Esperanza
- Schneidemaschine Kogan
- Schneidemaschine Rösle
- Schneidemaschine Tescoma
- Schneidemaschine Powerplus
- Schneidemaschine FAC
- Schneidemaschine RGV
- Schneidemaschine Presto
- Schneidemaschine Ozito
- Schneidemaschine Gourmetmaxx
- Schneidemaschine Swan
- Schneidemaschine Orbegozo
- Schneidemaschine CaterChef
- Schneidemaschine Ridgid
- Schneidemaschine Hobart
- Schneidemaschine Domoclip
- Schneidemaschine Emga
- Schneidemaschine Enkho
- Schneidemaschine Gastronoma
- Schneidemaschine Magic Chef
- Schneidemaschine Oster
- Schneidemaschine OXO
- Schneidemaschine PowerTec Kitchen
- Schneidemaschine Thane
- Schneidemaschine Zgonc
- Schneidemaschine Louis Tellier
- Schneidemaschine Avantco
- Schneidemaschine Nevir
- Schneidemaschine Wolfcraft
- Schneidemaschine Globe
- Schneidemaschine Berkel
- Schneidemaschine Nesco
- Schneidemaschine Nutrichef
- Schneidemaschine Kleva
- Schneidemaschine GARDE
- Schneidemaschine Cigweld
- Schneidemaschine Riviera & Bar
- Schneidemaschine Backyard Pro Butcher Series
- Schneidemaschine Pro-Cut
- Schneidemaschine Jokari
- Schneidemaschine Makeblock
- Schneidemaschine Boska
- Schneidemaschine Khind
- Schneidemaschine Weston
- Schneidemaschine Maruyama
- Schneidemaschine Baker's Mark
- Schneidemaschine Bifinet
- Schneidemaschine Bron-Coucke
- Schneidemaschine Prince Castle
- Schneidemaschine Borner
Neueste Bedienungsanleitung für -Kategorien-
16 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
Princess Classic Multi Food Slicer 492977 Bedienungsanleitung
10 Oktober 2024
9 Oktober 2024
6 Oktober 2024
5 Oktober 2024
4 Oktober 2024
29 September 2024