Makita CP100DZ Bedienungsanleitung
Makita
Schneidemaschine
CP100DZ
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Makita CP100DZ (8 Seiten) in der Kategorie Schneidemaschine. Dieser Bedienungsanleitung war für 23 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/8
INSTRUCTION MANUAL
Cordless Multi Cutter
CP100D
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: CP100D
No load speed 300 min-1
Overall length 291 mm
Rated voltage D.C. 10.8 V - 12 V max
Standard battery cartridge BL1015 / BL1016 / BL1020B / BL1021B / BL1040B / BL1041B
Charger DC10SA / DC10SB / DC10WC / DC10WD
Net weight 0.72 - 0.88 kg
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsandbatterycartridgemaydifferfromcountrytocountry.
• Theweightmaydifferdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-
estcombination,accordingtoEPTA-Procedure01/2014,areshowninthetable.
Symbols
Thefollowingshowthesymbolsusedfortheequip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
Ni-MH
Li-ion
OnlyforEUcountries
Donotdisposeofelectricequipmentor
battery pack together with household waste
material!
InobservanceoftheEuropeanDirectives,
onWasteElectricandElectronic
EquipmentandBatteriesandAccumulators
and Waste Batteries and Accumulators
and their implementation in accordance
withnationallaws,electricequipmentand
batteriesandbatterypack(s)thathave
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
Thetoolisintendedforcuttingexible,softmaterialsup
to6mminthickness,suchascarpet,cardboard,and
similarmaterials.Thetoolisalsointendedforcutting
CD,DVD,andBlu-rayDisc.
Noise
ThetypicalA-weightednoiseleveldeterminedaccord-
ingtoEN62841:
Soundpressurelevel(LpA ):70dB(A)orless
Uncertainty(K):3dB(A)
Thenoiselevelunderworkingmayexceed80dB(A).
WARNING: Wear ear protection.
Vibration
Thevibrationtotalvalue(tri-axialvectorsum)deter-
minedaccordingtoEN62841:
Workmode:Cuttingcardboard
Vibrationemission(ah):2.5m/s2 or less
Uncertainty(K):1.5m/s2
NOTE:
Thedeclaredvibrationemissionvaluehasbeen
measured in accordance with the standard test method
and may be used for comparing one tool with another.
NOTE:
Thedeclaredvibrationemissionvaluemay
also be used in a preliminary assessment of exposure.
WARNING:
Thevibrationemissionduringactual
use of the power tool can differ from the declared emission
value depending on the ways in which the tool is used.
WARNING:
Be sure to identify safety measures to pro-
tect the operator that are based on an estimation of exposure
intheactualconditionsofuse(takingaccountofallpartsofthe
operating cycle such as the times when the tool is switched off
andwhenitisrunningidleinadditiontothetriggertime).
EC Declaration of Conformity
For European countries only
TheECdeclarationofconformityisincludedasAnnexA
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING:
Read all safety warnings, instruc-
tions, illustrations and speciî‚¿cations provided with this
power tool. Failure to follow all instructions listed below
mayresultinelectricshock,reand/orseriousinjury.
Save all warnings and instruc-
tions for future reference.
Theterm"powertool"inthewarningsreferstoyour
mains-operated(corded)powertoolorbattery-operated
(cordless)powertool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust.Powertoolscreatesparks
which may ignite the dust or fumes.
3 ENGLISH
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodiedplugsandmatchingoutletswill
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators.Thereisanincreasedriskofelec-
tric shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
5. When operating a power tool outdoors, use an
extension cord suitable for outdoor use.Useof
a cord suitable for outdoor use reduces the risk of
electric shock.
6. If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply.UseofanRCDreduces
the risk of electric shock.
7. Power tools can produce electromagnetic
î‚¿elds (EMF) that are not harmful to the user.
However,usersofpacemakersandothersimilar
medical devices should contact the maker of their
device and/or doctor for advice before operating
this power tool.
Personal Safety
1. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the inuence of drugs, alcohol or med-
ication. A moment of inattention while operating
powertoolsmayresultinseriouspersonalinjury.
2. Use personal protective equipment. Always
wear eye protection.Protectiveequipmentsuch
asadustmask,non-skidsafetyshoes,hardhator
hearing protection used for appropriate conditions
willreducepersonalinjuries.
3. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with
yourngerontheswitchorenergisingpowertools
that have the switch on invites accidents.
4. Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
resultinpersonalinjury.
5. Do not overreach. Keep proper footing and
balance at all times.Thisenablesbettercontrol
of the power tool in unexpected situations.
6. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away
from moving parts.Looseclothes,jewelleryor
long hair can be caught in moving parts.
7. If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used.Useof
dust collection can reduce dust-related hazards.
8.
Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles. A careless action can
causesevereinjurywithinafractionofasecond.
Power tool use and care
1. Do not force the power tool. Use the correct
power tool for your application.Thecorrect
powertoolwilldothejobbetterandsaferatthe
rate for which it was designed.
2. Do not use the power tool if the switch does
not turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and
must be repaired.
3. Disconnect the plug from the power source
and/or remove the battery pack, if detachable,
from the power tool before making any adjust-
ments, changing accessories, or storing power
tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
4.
Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool.Power
tools are dangerous in the hands of untrained users.
5.
Maintain power tools and accessories. Check for
misalignment or binding of moving parts, break-
age of parts and any other condition that may
affect the power tool’s operation. If damaged, have
the power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
6. Keep cutting tools sharp and clean.Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
7. Use the power tool, accessories and tool bits
etc. in accordance with these instructions, tak-
ing into account the working conditions and
the work to be performed.Useofthepowertool
for operations different from those intended could
result in a hazardous situation.
8.
Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
9. When using the tool, do not wear cloth work
gloves which may be entangled.Theentangle-
ment of cloth work gloves in the moving parts may
resultinpersonalinjury.
Battery tool use and care
1. Recharge only with the charger speciî‚¿ed by
the manufacturer. A charger that is suitable for
onetypeofbatterypackmaycreateariskofre
when used with another battery pack.
2. Use power tools only with speciî‚¿cally desig-
nated battery packs.Useofanyotherbattery
packsmaycreateariskofinjuryandre.
3. When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from one
terminal to another. Shorting the battery termi-
nalstogethermaycauseburnsorare.
Produktspezifikationen
| Marke: | Makita |
| Kategorie: | Schneidemaschine |
| Modell: | CP100DZ |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Makita CP100DZ benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Schneidemaschine Makita
19 August 2024
6 August 2024
4 August 2024
26 Juli 2024
26 Juli 2024
21 Juli 2024
20 Juli 2024
19 Juli 2024
16 Juli 2024
14 Juli 2024
Bedienungsanleitung Schneidemaschine
- Schneidemaschine Clatronic
- Schneidemaschine Domo
- Schneidemaschine G3 Ferrari
- Schneidemaschine Coline
- Schneidemaschine Ernesto
- Schneidemaschine Tristar
- Schneidemaschine Genius
- Schneidemaschine SilverCrest
- Schneidemaschine Sunbeam
- Schneidemaschine Clas Ohlson
- Schneidemaschine Quigg
- Schneidemaschine Beper
- Schneidemaschine Bestron
- Schneidemaschine Camry
- Schneidemaschine Princess
- Schneidemaschine Royal Catering
- Schneidemaschine Trisa
- Schneidemaschine Bosch
- Schneidemaschine Parkside
- Schneidemaschine Ambiano
- Schneidemaschine Arendo
- Schneidemaschine Siemens
- Schneidemaschine Bifinett
- Schneidemaschine Electrolux
- Schneidemaschine Fagor
- Schneidemaschine Gorenje
- Schneidemaschine Jata
- Schneidemaschine Proficook
- Schneidemaschine Rommelsbacher
- Schneidemaschine Sammic
- Schneidemaschine Severin
- Schneidemaschine Unold
- Schneidemaschine Bomann
- Schneidemaschine Gastroback
- Schneidemaschine H.Koenig
- Schneidemaschine Hendi
- Schneidemaschine Korona
- Schneidemaschine Melissa
- Schneidemaschine OK
- Schneidemaschine Russell Hobbs
- Schneidemaschine Switch On
- Schneidemaschine Tefal
- Schneidemaschine Vox
- Schneidemaschine Powerfix
- Schneidemaschine ADE
- Schneidemaschine ECG
- Schneidemaschine Black And Decker
- Schneidemaschine Skil
- Schneidemaschine Blaupunkt
- Schneidemaschine Cuisinart
- Schneidemaschine Eldom
- Schneidemaschine Eta
- Schneidemaschine Fritel
- Schneidemaschine Graef
- Schneidemaschine Heinner
- Schneidemaschine Kenwood
- Schneidemaschine Krups
- Schneidemaschine Trebs
- Schneidemaschine Wilfa
- Schneidemaschine Festool
- Schneidemaschine Exquisit
- Schneidemaschine Bartscher
- Schneidemaschine MACH
- Schneidemaschine Philco
- Schneidemaschine Hikoki
- Schneidemaschine Hyundai
- Schneidemaschine Magimix
- Schneidemaschine Livoo
- Schneidemaschine Kinzo
- Schneidemaschine Perel
- Schneidemaschine Beem
- Schneidemaschine Mia
- Schneidemaschine Ritter
- Schneidemaschine Sencor
- Schneidemaschine Turmix
- Schneidemaschine Ariete
- Schneidemaschine Efbe-Schott
- Schneidemaschine Kalorik
- Schneidemaschine Rotel
- Schneidemaschine Saro
- Schneidemaschine Ufesa
- Schneidemaschine Dremel
- Schneidemaschine Westfalia
- Schneidemaschine De Buyer
- Schneidemaschine ICES
- Schneidemaschine Brother
- Schneidemaschine MPM
- Schneidemaschine Team
- Schneidemaschine Venga
- Schneidemaschine JAC
- Schneidemaschine Wabäma
- Schneidemaschine Brandson
- Schneidemaschine JML
- Schneidemaschine Waves
- Schneidemaschine Zelmer
- Schneidemaschine Esperanza
- Schneidemaschine Kogan
- Schneidemaschine Rösle
- Schneidemaschine Tescoma
- Schneidemaschine Powerplus
- Schneidemaschine FAC
- Schneidemaschine RGV
- Schneidemaschine Presto
- Schneidemaschine Ozito
- Schneidemaschine Gourmetmaxx
- Schneidemaschine Swan
- Schneidemaschine Orbegozo
- Schneidemaschine CaterChef
- Schneidemaschine Ridgid
- Schneidemaschine Hobart
- Schneidemaschine Domoclip
- Schneidemaschine Emga
- Schneidemaschine Enkho
- Schneidemaschine Gastronoma
- Schneidemaschine Magic Chef
- Schneidemaschine Oster
- Schneidemaschine OXO
- Schneidemaschine PowerTec Kitchen
- Schneidemaschine Thane
- Schneidemaschine Zgonc
- Schneidemaschine Louis Tellier
- Schneidemaschine Avantco
- Schneidemaschine Nevir
- Schneidemaschine Wolfcraft
- Schneidemaschine Globe
- Schneidemaschine Berkel
- Schneidemaschine Nesco
- Schneidemaschine Nutrichef
- Schneidemaschine Kleva
- Schneidemaschine GARDE
- Schneidemaschine Cigweld
- Schneidemaschine Riviera & Bar
- Schneidemaschine Backyard Pro Butcher Series
- Schneidemaschine Pro-Cut
- Schneidemaschine Jokari
- Schneidemaschine Makeblock
- Schneidemaschine Boska
- Schneidemaschine Khind
- Schneidemaschine Weston
- Schneidemaschine Maruyama
- Schneidemaschine Baker's Mark
- Schneidemaschine Bifinet
- Schneidemaschine Bron-Coucke
- Schneidemaschine Prince Castle
- Schneidemaschine Borner
Neueste Bedienungsanleitung für -Kategorien-
16 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
Princess Classic Multi Food Slicer 492977 Bedienungsanleitung
10 Oktober 2024
9 Oktober 2024
6 Oktober 2024
5 Oktober 2024
4 Oktober 2024
29 September 2024