Makita DHP482T1JW Bedienungsanleitung
Makita
boormachine
DHP482T1JW
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Makita DHP482T1JW (12 Seiten) in der Kategorie boormachine. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/12
![](https://manualstech.ams3.cdn.digitaloceanspaces.com/html/nl/makita/dhp482t1jw/html/bg1.png)
INSTRUCTION MANUAL
Cordless Hammer Driver Drill
DHP482
ENGLISH: Original instructions
Read before use.
![](https://manualstech.ams3.cdn.digitaloceanspaces.com/html/nl/makita/dhp482t1jw/html/bg2.png)
2 ENGLISH
SPECIFICATIONS
Model: DHP482
Drilling capacities 13 mmConcrete
Steel 13 mm
Wood 38 mm
Fastening capacities Wood screw 10 mm x 90 mm
Machine screw M6
No load speed High (2) 0 - 1,900 min-1
Low (1) 0 - 600 min-1
Blows per minute High (2) 0 - 28,500 min-1
Low (1) 0 - 9,000 min-1
Overall length 198 mm
Rated voltage D.C. 18 V
Battery cartridge BL1815N, BL1820, BL1820B BL1830, BL1840, BL1850,
BL1840B, BL1850B
Net weight 1.5 kg 1.8 kg
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsandbatterycartridgemaydifferfromcountrytocountry.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
Cd
Ni-MH
Li-ion
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for impact drilling in brick, concrete
and stone. It is also suitable for screw driving and drill-
ing without impact in wood, metal, ceramic and plastic.
Noise
The typical A-weighted noise level determined accord-
ing to EN60745:
Sound pressure level (LpA) : 82 dB(A)
Sound power level (LWA) : 93 dB (A)
Uncertainty (K) : 3 dB(A)
WARNING: Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745:
Work mode: impact drilling into concrete
Vibration emission (a
h,ID) : 6.0 m/s2
Uncertainty (K) : 1.5 m/s
2
Work mode: drilling into metal
Vibration emission (a
h,D) : 2.5 m/s
2 or less
Uncertainty (K) : 1.5 m/s
2
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE: The declared vibration emission value
may also be used in a preliminary assessment of
exposure.
WARNING: The vibration emission during actual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING: Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
Makita declares that the following Machine(s):
Designation of Machine: Cordless Hammer Driver Drill
Model No./ Type: DHP482
Conforms to the following European Directives:
2006/42/EC
![](https://manualstech.ams3.cdn.digitaloceanspaces.com/html/nl/makita/dhp482t1jw/html/bg3.png)
3ENGLISH
They are manufactured in accordance with the following
standard or standardized documents: EN60745
Thetechnicalleinaccordancewith2006/42/ECis
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
30.3.2015
Yasushi Fukaya
Director
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
General power tool safety warnings
WARNING: Read all safety warnings and
all instructions. Failure to follow the warnings and
instructionsmayresultinelectricshock,reand/or
seriousinjury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodiedplugsandmatchingoutletswill
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
5. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
6. If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
Personal Safety
1. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the inuence of drugs, alcohol or med-
ication. A moment of inattention while operating
powertoolsmayresultinseriouspersonalinjury.
2. Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
willreducepersonalinjuries.
3. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with
yourngerontheswitchorenergisingpowertools
that have the switch on invites accidents.
4. Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
resultinpersonalinjury.
5. Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
6. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing, and gloves
away from moving parts.Looseclothes,jewel-
lery or long hair can be caught in moving parts.
7. If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
Power tool use and care
1. Do not force the power tool. Use the correct
power tool for your application. The correct
powertoolwilldothejobbetterandsaferatthe
rate for which it was designed.
2. Do not use the power tool if the switch does
not turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and
must be repaired.
3. Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such pre
-
ventive safety measures reduce the risk of starting
the power tool accidentally.
4. Store idle power tools out of the reach of chil-
dren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in the
hands of untrained users.
5. Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
6. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
7. Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
Produktspezifikationen
Marke: | Makita |
Kategorie: | boormachine |
Modell: | DHP482T1JW |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Makita DHP482T1JW benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung boormachine Makita
![Makita](/images/logos/makita.png)
8 September 2024
![Makita](/images/logos/makita.png)
25 August 2024
![Makita](/images/logos/makita.png)
21 August 2024
![Makita](/images/logos/makita.png)
16 August 2024
![Makita](/images/logos/makita.png)
15 August 2024
![Makita](/images/logos/makita.png)
13 August 2024
![Makita](/images/logos/makita.png)
12 August 2024
![Makita](/images/logos/makita.png)
10 August 2024
![Makita](/images/logos/makita.png)
10 August 2024
![Makita](/images/logos/makita.png)
9 August 2024
Bedienungsanleitung boormachine
- boormachine Panasonic
- boormachine Cotech
- boormachine Bosch
- boormachine Flex
- boormachine Parkside
- boormachine Vonroc
- boormachine AEG
- boormachine Velleman
- boormachine Powerfix
- boormachine Black And Decker
- boormachine Cocraft
- boormachine FERM
- boormachine Ryobi
- boormachine Skil
- boormachine Topcraft
- boormachine Trotec
- boormachine Maestro
- boormachine Carat
- boormachine Eibenstock
- boormachine Hilti
- boormachine Bort
- boormachine DeWalt
- boormachine Einhell
- boormachine Elu
- boormachine Festool
- boormachine Mafell
- boormachine Maktec
- boormachine Worx
- boormachine Hikoki
- boormachine Hitachi
- boormachine Hazet
- boormachine Kress
- boormachine Max
- boormachine Metabo
- boormachine Stanley
- boormachine Würth
- boormachine Güde
- boormachine Power Craft
- boormachine Scheppach
- boormachine Workzone
- boormachine Meec Tools
- boormachine Dremel
- boormachine Fieldmann
- boormachine EcoMAC
- boormachine Proxxon
- boormachine Westfalia
- boormachine Dedra
- boormachine DURO
- boormachine Graphite
- boormachine Silverline
- boormachine Holzmann
- boormachine Huvema
- boormachine Robust
- boormachine Stomer
- boormachine Yato
- boormachine Baumr-AG
- boormachine Genesis
- boormachine Toolland
- boormachine Batavia
- boormachine Bavaria
- boormachine Brüder Mannesmann
- boormachine Milwaukee
- boormachine Fein
- boormachine Craftsman
- boormachine Powerplus
- boormachine Rupes
- boormachine ProfiTech
- boormachine Alpha Tools
- boormachine Ozito
- boormachine Kawasaki
- boormachine Sun Joe
- boormachine Ridgid
- boormachine Porter-Cable
- boormachine Economy
- boormachine Fe Powertools
- boormachine Gamma
- boormachine Global
- boormachine Lux Tools
- boormachine Max Bahr
- boormachine Protool
- boormachine Spit
- boormachine Steren
- boormachine Tanaka
- boormachine Meister Craft
- boormachine Malmbergs
- boormachine RIKON
- boormachine Kreg
- boormachine Einhell Bavaria
- boormachine Powerblade
- boormachine Rok
- boormachine Tryton
- boormachine MyTool
- boormachine McKenzie
- boormachine Rodcraft
- boormachine Black Decker
Neueste Bedienungsanleitung für -Kategorien-
![Black And Decker](/images/pdf_free.png)
8 September 2024
![Milwaukee](/images/pdf_free.png)
8 September 2024
![Black And Decker](/images/pdf_free.png)
8 September 2024
![Fein](/images/pdf_free.png)
8 September 2024
![Einhell](/images/pdf_free.png)
7 September 2024
![Einhell](/images/pdf_free.png)
6 September 2024
![ProfiTech](/images/pdf_free.png)
6 September 2024
![DeWalt](/images/logos/dewalt.png)
6 September 2024
![DeWalt](/images/logos/dewalt.png)
6 September 2024
![Stanley](/images/pdf_free.png)
6 September 2024