Makita DGA452RTJ Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Makita DGA452RTJ (16 Seiten) in der Kategorie Schleifer. Dieser Bedienungsanleitung war für 30 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/16
1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
IMPORTANT: Read Before Using.
Cordless Angle Grinder
DGA402
DGA450
DGA452
007214
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model DGA402 DGA450 DGA452
Wheel diameter 100 mm 115 mm
Max. wheel thickness 6.4 mm 6.4 mm 6.4 mm
Spindle thread M10 M14 or 5/8" (country specific)
Rated speed (n) / No load speed (n
0
) 11,000 (min-1)
Overall length 317 mm
Net weight 2.2 kg 2.2 kg 2.3 kg
Rated voltage D.C. 18 V D.C. 14.4 V D.C. 18 V
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
END221-4
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
ï½¥ Read instruction manual.
ï½¥ Wear safety glasses.
ï½¥ Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of the European
Directives, on Waste Electric and
Electronic Equipment and Batteries and
Accumulators and Waste Batteries and
Accumulators and their implementation
in accordance with national laws,
electric equipment and batteries and
battery pack(s) that have reached the
end of their life must be collected
separately and returned to an
environmentally compatible recycling
facility.
ENE048-1
Intended use
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN60745:
Model DGA450
Sound pressure level (L
pA ) : 74 dB (A)
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Model DGA452
Sound pressure level (L
pA ) : 76 dB (A)
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Model DGA450
Work mode : surface grinding
Vibration emission (ah,AG) : 8.5 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: disc sanding
Vibration emission (ah,DS) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s2
Model DGA452
Work mode : surface grinding
Vibration emission (ah,AG) : 10.0 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: disc sanding
Vibration emission (ah,DS) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s2
Cd
Ni-MH
Li-ion
3
ENG902-1
• The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
• The declared vibration emission value is used for
main applications of the power tool. However if the
power tool is used for other applications, the
vibration emission value may be different.
WARNING:
•
The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH101-16
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Cordless Angle Grinder
Model No./ Type: DGA450,DGA452
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by:
Makita International Europe Ltd.
Technical Department,
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
30.1.2009
000230
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN
GEA006-2
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
8. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use
of a cord suitable for outdoor use reduces the risk
of electric shock.
9. If operating a power tool in a damp location is
unavoidable, use a ground fault circuit
interrupter (GFCI) protected supply. Use of an
GFCI reduces the risk of electric shock.
Personal safety
10.
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
Produktspezifikationen
| Marke: | Makita |
| Kategorie: | Schleifer |
| Modell: | DGA452RTJ |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Makita DGA452RTJ benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Schleifer Makita
9 Mai 2024
7 Mai 2024
2 Mai 2024
21 April 2024
15 April 2024
3 April 2024
1 April 2024
13 März 2024
12 März 2024
11 März 2024
Bedienungsanleitung Schleifer
- Schleifer Cotech
- Schleifer Adler
- Schleifer Bosch
- Schleifer Flex
- Schleifer Parkside
- Schleifer Vonroc
- Schleifer AEG
- Schleifer Gorenje
- Schleifer Powerfix
- Schleifer ECG
- Schleifer Black And Decker
- Schleifer Cocraft
- Schleifer FERM
- Schleifer Ryobi
- Schleifer Skil
- Schleifer Trotec
- Schleifer Eibenstock
- Schleifer Hilti
- Schleifer DeWalt
- Schleifer Einhell
- Schleifer Festool
- Schleifer Worx
- Schleifer Nuova Simonelli
- Schleifer Hikoki
- Schleifer Hitachi
- Schleifer Hazet
- Schleifer Kress
- Schleifer Metabo
- Schleifer Stanley
- Schleifer Güde
- Schleifer Scheppach
- Schleifer Workzone
- Schleifer Meec Tools
- Schleifer Proxxon
- Schleifer Westfalia
- Schleifer Husqvarna
- Schleifer Chicago Pneumatic
- Schleifer Silverline
- Schleifer Sthor
- Schleifer Robust
- Schleifer Yato
- Schleifer Genesis
- Schleifer Mirka
- Schleifer Toolland
- Schleifer ABB
- Schleifer Milwaukee
- Schleifer Fein
- Schleifer Craftsman
- Schleifer Powerplus
- Schleifer Alpha Tools
- Schleifer Ozito
- Schleifer Kawasaki
- Schleifer Porter-Cable
- Schleifer Global
- Schleifer Steren
- Schleifer Victoria Arduino
- Schleifer Einhell Bavaria
- Schleifer Urrea
- Schleifer Ergotools Pattfield
- Schleifer Bavaria By Einhell
- Schleifer Classic Power
- Schleifer SW-Stahl
Neueste Bedienungsanleitung für -Kategorien-
26 Juni 2024
26 Juni 2024
26 Juni 2024
26 Juni 2024
26 Juni 2024
26 Juni 2024
26 Juni 2024
26 Juni 2024
25 Juni 2024
24 Juni 2024