Makita DA333DWAE Bedienungsanleitung
Lesen Sie kostenlos die ๐ deutsche Bedienungsanleitung fรผr Makita DA333DWAE (12 Seiten) in der Kategorie bohren. Dieser Bedienungsanleitung war fรผr 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/12
INSTRUCTION MANUAL
Cordless Angle Drill
DA332D
DA333D
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: DA332D DA333D
Drilling capacities 10 mmSteel
Wood 12 mm
No load speed 0 - 1,100 min-1
Overall length 313 mm - 332 mm
Rated voltage D.C. 10.8 V - 12 V max
Battery cartridge BL1015 / BL1016 / BL1020B / BL1021B / BL1040B / BL1041B
Net weight 1.2 - 1.3 kg 1.2 - 1.4 kg
โข๎ Due๎to๎our๎continuing๎program๎of๎research๎and๎development,๎the๎speci๎ฟcations๎herein๎are๎subject๎to๎change๎
without notice.
โข๎ Speci๎ฟcations๎and๎battery๎cartridge๎may๎differ๎from๎country๎to๎country.
โข๎ The๎weight๎may๎differ๎depending๎on๎the๎attachment(s),๎including๎the๎battery๎cartridge.๎The๎lightest๎and๎heavi-
est๎combination,๎according๎to๎EPTA-Procedure๎01/2014,๎are๎shown๎in๎the๎table.
Symbols
The๎following๎show๎the๎symbols๎used๎for๎the๎equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
Ni-MH
Li-ion
Only for EU countries
Do๎not๎dispose๎of๎electric๎equipment๎or๎
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment๎and๎Batteries๎and๎Accumulators๎
and๎Waste๎Batteries๎and๎Accumulators๎
and their implementation in accordance
with๎national๎laws,๎electric๎equipment๎and๎
batteries๎and๎battery๎pack(s)๎that๎have๎
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The๎tool๎is๎intended๎for๎drilling๎in๎wood,๎metal๎and๎
plastic.
Noise
The๎typical๎A-weighted๎noise๎level๎determined๎accord-
ing to EN60745:
Model DA332D
Sound๎pressure๎level๎(L
pA)๎:๎70๎dB(A)๎or๎less
Uncertainty๎(K)๎:๎3๎dB(A)
Model DA333D
Sound๎pressure๎level๎(L
pA)๎:๎70๎dB(A)๎or๎less
Uncertainty๎(K)๎:๎3๎dB(A)
The๎noise๎level๎under๎working๎may๎exceed๎80๎dB๎(A).
WARNING: Wear ear protection.
Vibration
The๎vibration๎total๎value๎(tri-axial๎vector๎sum)๎deter-
mined according to EN60745:
Model DA332D
Work mode: drilling into metal
Vibration๎emission๎(a
h,D)๎:๎2.5๎m/s2 or less
Uncertainty๎(K)๎:๎1.5๎m/s
2
Model DA333D
Work mode: drilling into metal
Vibration๎emission๎(a
h,D)๎:๎3.0๎m/s2
Uncertainty๎(K)๎:๎1.5๎m/s
2
NOTE:๎The๎declared๎vibration๎emission๎value๎has๎
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE:๎The๎declared๎vibration๎emission๎value๎
may also be used in a preliminary assessment of
exposure.
WARNING:๎The๎vibration๎emission๎during๎actual๎
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING: Be sure to identify safety measures
to protect the operator that are based on an estima-
tion๎of๎exposure๎in๎the๎actual๎conditions๎of๎use๎(taking๎
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running๎idle๎in๎addition๎to๎the๎trigger๎time).
EC Declaration of Conformity
For European countries only
The๎EC๎declaration๎of๎conformity๎is๎included๎as๎Annex๎A๎
to this instruction manual.
3 ENGLISH
SAFETY WARNINGS
General power tool safety warnings
WARNING:
Read all safety warnings, instruc-
tions, illustrations and speci๎ฟcations provided with this
power tool. Failure to follow all instructions listed below
may๎result๎in๎electric๎shock,๎๎ฟre๎and/or๎serious๎injury.
Save all warnings and instruc-
tions for future reference.
The๎term๎"power๎tool"๎in๎the๎warnings๎refers๎to๎your๎
mains-operated๎(corded)๎power๎tool๎or๎battery-operated๎
(cordless)๎power๎tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ๎ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodi๎ฟed๎plugs๎and๎matching๎outlets๎will๎
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators.๎There๎is๎an๎increased๎risk๎of๎elec-
tric shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
5.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
6. If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
7.
Power tools can produce electromagnetic ๎ฟelds
(EMF) that are not harmful to the user. However,
users of pacemakers and other similar medical
devices should contact the maker of their device and/
or doctor for advice before operating this power tool.
Personal Safety
1. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the in๎uence of drugs, alcohol or med-
ication.๎A๎moment๎of๎inattention๎while๎operating๎
power๎tools๎may๎result๎in๎serious๎personal๎injury.
2. Use personal protective equipment. Always
wear eye protection.๎Protective๎equipment๎such๎
as a dust mask, non-skid safety shoes, hard hat or
hearing protection used for appropriate conditions
will๎reduce๎personal๎injuries.
3. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with
your๎๎ฟnger๎on๎the๎switch๎or๎energising๎power๎tools๎
that have the switch on invites accidents.
4. Remove any adjusting key or wrench before
turning the power tool on.๎A๎wrench๎or๎a๎key๎left๎
attached to a rotating part of the power tool may
result๎in๎personal๎injury.
5. Do not overreach. Keep proper footing and
balance at all times.๎This๎enables๎better๎control๎
of the power tool in unexpected situations.
6. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away
from moving parts.๎Loose๎clothes,๎jewellery๎or๎
long hair can be caught in moving parts.
7. If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
8.
Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles.๎A๎careless๎action๎can๎
cause๎severe๎injury๎within๎a๎fraction๎of๎a๎second.
9. Always wear protective goggles to protect
your eyes from injury when using power tools.
The goggles must comply with ANSI Z87.1 in
the USA, EN 166 in Europe, or AS/NZS 1336
in Australia/New Zealand. In Australia/New
Zealand, it is legally required to wear a face
shield to protect your face, too.
It is an employer's responsibility to enforce
the use of appropriate safety protective equip-
ments by the tool operators and by other per-
sons in the immediate working area.
Power tool use and care
1. Do not force the power tool. Use the correct
power tool for your application.๎The๎correct๎
power๎tool๎will๎do๎the๎job๎better๎and๎safer๎at๎the๎
rate for which it was designed.
2. Do not use the power tool if the switch does
not turn it on and off.๎Any๎power๎tool๎that๎cannot๎
be controlled with the switch is dangerous and
must be repaired.
Produktspezifikationen
| Marke: | Makita |
| Kategorie: | bohren |
| Modell: | DA333DWAE |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Makita DA333DWAE benรถtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung bohren Makita
13 Oktober 2024
7 Oktober 2024
7 Oktober 2024
4 Oktober 2024
2 Oktober 2024
30 September 2024
24 September 2024
23 September 2024
18 September 2024
15 September 2024
Bedienungsanleitung bohren
- bohren Basetech
- bohren Panasonic
- bohren Clas Ohlson
- bohren Cotech
- bohren Bosch
- bohren Flex
- bohren Laserliner
- bohren Parkside
- bohren Vonroc
- bohren AEG
- bohren Velleman
- bohren Powerfix
- bohren Black And Decker
- bohren Cocraft
- bohren FERM
- bohren Ryobi
- bohren Skil
- bohren Topcraft
- bohren Trotec
- bohren Maestro
- bohren Baier
- bohren Carat
- bohren Eibenstock
- bohren Hilti
- bohren Bort
- bohren DeWalt
- bohren Einhell
- bohren Elu
- bohren Festool
- bohren Mafell
- bohren Maktec
- bohren Worx
- bohren Luxor
- bohren Hikoki
- bohren Hitachi
- bohren Hyundai
- bohren Hazet
- bohren Kinzo
- bohren Kress
- bohren Max
- bohren Metabo
- bohren Stanley
- bohren Wรผrth
- bohren Gรผde
- bohren Power Craft
- bohren Scheppach
- bohren Workzone
- bohren Biltema
- bohren Meec Tools
- bohren Dremel
- bohren Fieldmann
- bohren EcoMAC
- bohren Proxxon
- bohren Westfalia
- bohren Dedra
- bohren DURO
- bohren Graphite
- bohren Silverline
- bohren Holzmann
- bohren MSW
- bohren Huvema
- bohren Robust
- bohren Zipper
- bohren Stomer
- bohren Yato
- bohren Baumr-AG
- bohren Genesis
- bohren BluCave
- bohren Toolland
- bohren Delta
- bohren Batavia
- bohren Bavaria
- bohren Brรผder Mannesmann
- bohren Milwaukee
- bohren Narex
- bohren Toolcraft
- bohren Fein
- bohren Verto
- bohren Craftsman
- bohren Powerplus
- bohren Rupes
- bohren ProfiTech
- bohren Alpha Tools
- bohren Ozito
- bohren Kawasaki
- bohren Sun Joe
- bohren Ridgid
- bohren Porter-Cable
- bohren VARO
- bohren Duro Pro
- bohren Economy
- bohren Fe Powertools
- bohren Gamma
- bohren Global
- bohren Goon
- bohren Lux Tools
- bohren Max Bahr
- bohren Protool
- bohren Spit
- bohren Steren
- bohren Tanaka
- bohren Meister Craft
- bohren Malmbergs
- bohren Truper
- bohren RIKON
- bohren Kreg
- bohren G-Technology
- bohren Einhell Bavaria
- bohren Powerblade
- bohren Rok
- bohren Tryton
- bohren MyTool
- bohren McKenzie
- bohren Rodcraft
- bohren Ribimex
- bohren Black Decker
- bohren RUKO
- bohren Handwerk
- bohren Stalco
Neueste Bedienungsanleitung fรผr -Kategorien-
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
15 Oktober 2024
15 Oktober 2024
13 Oktober 2024
13 Oktober 2024
13 Oktober 2024