Makita BDF343RHE Bedienungsanleitung

Makita Bohrschrauber BDF343RHE

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Makita BDF343RHE (40 Seiten) in der Kategorie Bohrschrauber. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/40

GB Cordless Driver Drill Instruction manual

F Perceuse-visseuse sans fil Manuel d’instructions

D Akku-Bohrschrauber Betriebsanleitung

I Trapano avvitatore a batteria Istruzioni per l’uso

NL Accuschroefboormachine Gebruiksaanwijzing

E Taladro sin cables Manual de instrucciones

P Berbequim sem fios Manual de instruções

DK Akku bore-skruemaskine Brugsanvisning

GR Δραπανοκατσάβιδο μπαταρίας Οδηγίες χρήσης

BDF343

BDF453

1 2

3 4

5 6

ENGLISH

Explanation of general view

SPECIFICATIONS

• Due to our continuing programme of research and development, the specifications herein are subject to change without

notice.

• Note: Specifications may differ from country to country.

Symbols END004-2

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

............. Read instruction manual.

Intended use ENE034-1

The tool is intended for drilling and screw driving in wood,

metal and plastic.

SPECIFIC SAFETY RULES GEB002-2

DO NOT let comfort or familiarity with product (gained

from repeated use) replace strict adherence to drill

safety rules. If you use this power tool unsafely or

incorrectly, you can suffer serious personal injury.

1. Hold power tools by insulated gripping surfaces

when performing an operation where the cutting

tool may contact hidden wiring or its own cord.

Contact with a “live” wire will make exposed metal

parts of the tool “live” and shock the operator.

2. Always be sure you have a firm footing. Be sure

no one is below when using the tool in high

locations.

3. Hold the tool firmly.

4. Keep hands away from rotating parts.

5. Do not leave the tool running. Operate the tool

only when hand-held.

6. Do not touch the drill bit or the workpiece

immediately after operation; they may be

extremely hot and could burn your skin.

7. Some material contains chemicals which may be

toxic. Take caution to prevent dust inhalation and

skin contact. Follow material supplier safety data.

SAVE THESE INSTRUCTIONS.

WARNING:

MISUSE or failure to follow the safety rules stated in

this instruction manual may cause serious personal

injury.

IMPORTANT SAFETY

INSTRUCTIONS ENC007-2

FOR BATTERY CARTRIDGE

1. Before using battery cartridge, read all

instructions and cautionary markings on (1)

battery charger, (2) battery, and (3) product using

battery.

2. Do not disassemble battery cartridge.

3. If operating time has become excessively shorter,

stop operating immediately. It may result in a risk

of overheating, possible burns and even an

explosion.

4. If electrolyte gets into your eyes, rinse them out

with clear water and seek medical attention right

away. It may result in loss of your eyesight.

5. Do not short the battery cartridge:

(1) Do not touch the terminals with any

conductive material.

(2) Avoid storing battery cartridge in a container

with other metal objects such as nails, coins,

etc.

(3) Do not expose battery cartridge to water or

rain. A battery short can cause a large current

flow, overheating, possible burns and even a

breakdown.

1. Red part

2. Button

3. Battery cartridge

4. Switch trigger

5. Reversing switch lever

6. Speed change lever

7. Adjusting ring

8. Graduation

9. Pointer

10. Sleeve

Model BDF343 BDF453

Capacities

Steel 10 mm 13 mm

Wood 25 mm 36 mm

Wood screw 5.1 mm x 63 mm 6 mm x 75 mm

Machine screw 6 mm

No load speed (min -1)High (2) 0 - 1,300

Low (1) 0 - 400

Overall length 192 mm 214 mm

Net weight 1.3 kg (BL1415)/1.5 Kg (BL1430) 1.6 kg (BL1815)/1.8 Kg (BL1830)

Rated voltage D.C. 14.4 V D.C. 18 V

Produktspezifikationen

Marke:	Makita
Kategorie:	Bohrschrauber
Modell:	BDF343RHE
Produktfarbe:	Schwarz
Akku-/Batterietechnologie:	Lithium-Ion (Li-Ion)
Energiequelle:	Akku
Bohrdruchmesser in Stahl (max.):	10 mm
Bohrdurchmesser in Holz (max.):	25 mm
Produktdesign:	Handbohrmaschine
Akku-/Batteriespannung:	14.4 V
Batteriekapazität:	1.3 Ah
Ladezeit:	15 min
Bohren:	Ja
Leerlaufgeschwindigkeit (1. Gang):	400 RPM
Leerlaufgeschwindigkeit (2. Gang):	1300 RPM
Maximum Drehkraft (schwere Anwendung):	36 Nm
Schrauben:	Ja
Maximum Drehkraft (leichte Verwendung):	20 Nm