Makita 6905B Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Makita 6905B (36 Seiten) in der Kategorie Schlagschrauber. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/36
GB
Impact Wrench Instruction Manual
F
Boulonneuse à chocs Manuel d’Instructions
D
Schlagschrauber Betriebsanleitung
I
Avvitatrici ad Impulso Istruzioni d’Uso
NL
Slagmoersleutel Gebruiksaanwijzing
E
Llave de Impacto Manual de Instrucciones
P
Chave de Impacto Manual de Instruço˜ es
DK
Slagnøgle Brugsanvisning
S
Hamrande Mutterdragare Bruksanvisning
N
Slagmuttertrekker Bruksanvisning
SF
Iskuväännin Käyttöohje
GR ∫ÚÔ˘ÛÙÈÎfi ∫ÏÂȉ› √‰ËÁ›Â˜ ¯Ú‹Ûˆ˜
6905B
6906
1 2
3 4
5
2
ENGLISH Explanation of general view
1Socket
2Anvil
3Counterclockwise
4Reversible switch
5Clockwise
6Limit mark
7Screwdriver
8Brush holder cap
SPECIFICATIONS
Model 6905B 6906
Capacities
Bolt size ................................................................... 12 mm – 20 mm 16 mm – 22 mm
Square drive ............................................................ 12.7 mm 19 mm
Impacts per minute ..................................................... 2,000 1,600
No load speed (RPM) ................................................. 1,700 1,700
Tightening torque ........................................................ 3,000 kg.cm 6,000 kg.cm
Overall length ............................................................. 270 mm 327 mm
Net weight ................................................................... 2.7 kg 5.0 kg
Due to the continuing program of research and
development, the specifications herein are subject
to change without prior notice.
Note: Specifications may differ from country to
country.
Power supply
The machine should be connected only to a power
supply of the same voltage as indicated on the
nameplate, and can only be operated on single-phase
AC supply. They are double-insulated in accordance
with European Standard and can, therefore, also be
used from sockets without earth wire.
Safety hints
For your own safety, please refer to enclosed safety
instructions.
These symbols mean:
Read instruction manual.
DOUBLE INSULATION
ADDITIONAL SAFETY RULES
FOR MACHINE
1. Wear ear protectors.
2. Check the socket carefully for wear, cracks or
damage before installation.
3. Hold the machine firmly.
4. Always be sure you have a firm footing. Be
sure no one is below when using the machine
in high locations.
5. The proper tightening torque may differ
depending upon the kind or size of the bolt.
Check the torque with a torque wrench.
SAVE THESE INSTRUCTIONS.
OPERATING INSTRUCTIONS
Selecting correct socket
Use a correct size socket for bolts and nuts. A wrong
size socket will result in inaccurate and inconsistent
tightening torque.
Installing the side grip (Fig. 1)
For 6906 only
Fit the side grip into the groove on the middle of the
hammer case and fasten securely.
Attaching the socket (Fig. 2)
Selecting a proper socket in size, please insert it into
the anvil so as to fix securely.
Switch action (Fig. 3)
CAUTION:
Before plugging in the machine, always check to
see that the switch trigger actuates properly and
returns to the ‘‘OFF’’ position when released.
Change the direction of rotation only after the
machine comes to a complete stop. Changing it
before the machine stops may damage the
machine.
The switch is reversible, providing either clockwise or
counterclockwise rotation. To start the machine, sim-
ply pull the lower part of the switch for clockwise, the
upper part for counterclockwise. Release the switch
to stop.
3


Produktspezifikationen

Marke: Makita
Kategorie: Schlagschrauber
Modell: 6905B

Brauchst du Hilfe?

Wenn Sie Hilfe mit Makita 6905B benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten