Makita 6904VH Bedienungsanleitung
Makita
Schlagschrauber
6904VH
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Makita 6904VH (12 Seiten) in der Kategorie Schlagschrauber. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/12
1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
DOUBLE INSULATION
IMPORTANT: Read Before Using.
Impact Wrench
6904VH
6905H
005299
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model 6904VH 6905H
Standard bolt M10 - M16 M12 - M20
High tensile bolt M10 - M12 M12 - M16
Wood screw 6 mm x 100 mm -
Capacities
Self-drilling screw 6 mm -
Square drive 12.7 mm 12.7 mm
High: 0 - 2,400 2,200
No load speed (min-1) Low: 0 - 2,100 -
High: 0 - 3,000 2,600
Impacts per minute Low: 0 - 2,500 -
High: 196 N.m 294 N.m
Max. fastening torque Low: 147 N.m -
Overall length 265 mm 275 mm
Net weight 1.8 kg 2.3 kg
Safety class /II /II
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END201-5
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
ï½¥ Read instruction manual.
ï½¥ DOUBLE INSULATION
ï½¥ Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible recycling
facility.
ENE036-1
Intended use
The tool is intended for fastening bolts and nuts.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
ENG905-1
Noise
The typical A-weighted noise level determined according
to EN60745:
Model 6904VH
Sound pressure level (L
pA) : 95 dB(A)
Sound power level (L
WA) : 106 dB(A)
Uncertainty (K) : 3 dB(A)
Model 6905H
Sound pressure level (L
pA) : 94 dB(A)
Sound power level (L
WA) : 105 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Model 6904VH
Work mode : impact tightening of fasteners of the
maximum capacity of the tool
Vibration emission (ah) : 6.5 m/s2
Uncertainty (K) : 1.5 m/s2
3
Model 6905H
Work mode : impact tightening of fasteners of the
maximum capacity of the tool
Vibration emission (ah) : 6.0 m/s2
Uncertainty (K) : 1.5 m/s2
ENG901-1
• The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH101-15
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Impact Wrench
Model No./ Type: 6904VH,6905H
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd.
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
30.1.2009
000230
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN
GEA005-3
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
8. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
Produktspezifikationen
| Marke: | Makita |
| Kategorie: | Schlagschrauber |
| Modell: | 6904VH |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Makita 6904VH benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Schlagschrauber Makita
12 Oktober 2024
14 Juli 2024
13 Juli 2024
12 Juli 2024
11 Juli 2024
8 Oktober 2022
8 Oktober 2022
8 Oktober 2022
8 Oktober 2022
8 Oktober 2022
Bedienungsanleitung Schlagschrauber
- Schlagschrauber Panasonic
- Schlagschrauber Bosch
- Schlagschrauber Parkside
- Schlagschrauber FERM
- Schlagschrauber DeWalt
- Schlagschrauber Einhell
- Schlagschrauber Worx
- Schlagschrauber Hitachi
- Schlagschrauber Milwaukee
- Schlagschrauber Fein
- Schlagschrauber Draper
- Schlagschrauber Hamron
Neueste Bedienungsanleitung für -Kategorien-
11 Oktober 2024
24 August 2024
23 August 2024
23 August 2024
22 August 2024
21 August 2024
20 August 2024
19 August 2024
18 August 2024
17 August 2024