Magnus LM-700 Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Magnus LM-700 (2 Seiten) in der Kategorie Stativ. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/2
• Ensure that all knobs, handles, and legs are properly
secured before mounting your camera on this tripod.
• Never transport, carry, or store this tripod while your
camera is attached.
• Do not attempt to remove the center brace.
• Do not use solvents, grease, or oil on any of the tripod
components. Use only a mild soap solution to clean,
and wipe dry with a lint-free cloth.
• Do not exceed the maximum load capacity.
• All images are for illustrative purposes only.
User Cautions
Specifications
Photo/Video Tripod Components
www.magnustripods.com
Tilt & pan bar/
Tilt lock
Center column
locking knob
Center column
pan lock
Carry handle
Bubble level
90° tilt lock
Pan lock
Registration pin
1/4-20 mounting screwQuick-release plate
Quick-release lever
Foam padding
Center brace
locking collar Flip-locks
Center column/
Monopod
LM-700
Photo/Video Tripod
ONE-YEAR LIMITED WARRANTY
This MAGNUS product is warranted to the original
purchaser to be free from defects in materials and
workmanship under normal consumer use for a period
of one (1) year from the original purchase date or thirty
(30) days after replacement, whichever occurs later.
The warranty provider’s responsibility with respect to
this limited warranty shall be limited solely to repair or
replacement, at the provider’s discretion, of any product
that fails during normal use of this product in its intended
manner and in its intended environment. Inoperability
of the product or part(s) shall be determined by the
warranty provider. If the product has been discontinued,
the warranty provider reserves the right to replace
it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused
by misuse, neglect, accident, alteration, abuse, improper
installation or maintenance. EXCEPT AS PROVIDED
HEREIN, THE WARRANTY PROVIDER MAKES NEITHER
ANY EXPRESS WARRANTIES NOR ANY IMPLIED
WARRANTIES, INCLUDING BUT NOT LIMITED TO
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. This warranty
provides you with specific legal rights, and you may
also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Magnus
Customer Service Department to obtain a return
merchandise authorization (“RMA”) number, and return
the defective product to Magnus along with the RMA
number and proof of purchase. Shipment of the defective
product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit
www.magnustripods.com or call Customer Service at
212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
Magnus is a registered trademark of the Gradus Group.
© 2022 Gradus Group LLC. All rights reserved.
GG1
Weight
hook
Swiveling rubber feet
Thank you
for choosing
Magnus.
Max Height: 70 in. (177.8 cm)
Max Height without Center Column
Extended: 59 in. (150 cm)
Minimum Height: 21.4 in. (54.3 cm)
Closed Height: 23 in. (58.4 cm)
Maximum Load: 10 lb. (4.5 kg)
Weight: 3.6 lb. (1.6 kg)
Monopod Height: Max: 62 in. (157.5 cm)
Min: 17 in. (43.2 cm)
Opening the Tripod
Mounting the Quick-Release Plate to
the Camera
Using the Pan & Tilt Head Using the Lateral Center Colum
Using the Monopod
To Retract the Monopod Sections
The Counterweight Hook
The center column converts
to a monopod with five
telescoping sections.
Collapse the monopod to its shortest length before
replacing it in the tripod.
In windy conditions or on
an uneven surface, stabilize
the tripod and camera by
hanging a weight on the
counterweight hook.
Adjusting the Center Column Height
1 Always extend the
legs from the top flip
locks first. Extend the
legs to the desired
height and close each
flip lock.
The quick-release plate has a registration pin for
compatible cameras.
Make sure the quick-release plate is flush with the bottom
of the camera.
1 Pull out the quick-
release lever and
remove the quick-
release plate from the
head.
2 Line up the quick-
release plate
lengthwise with
the bottom of the
camera, and tighten
the screw into the
camera’s mounting
socket.
1 Use the center
column lock to raise
and lower the center
column.
1 Loosen the center
column lock, and lift
the center column out
of the tripod.
2 Hold the monopod in
one hand and rotate
the foot. Each of
the four telescoping
sections unlocks with
a quarter turn.
3 When the desired
height is reached,
turn the foot in the
opposite direction to
lock the sections into
place.
1 Turn the foot a
quarter turn for each
extended section
and collapse all the
sections.
2 When the monopod
is fully retracted,
rotate the foot to lock
it closed.
1 Loosen the center
column lock, and lift
the center column out
of the tripod.
2 Insert the center
column into the
center column mount
laterally, and tighten
the center column lock
to secure it.
3 Loosen the center
column pan lock
to turn the center
column to the desired
position. Tighten
the lock to prevent
swiveling
2 Set the center column
at the desired height
and tighten the
center column lock.
To prevent swiveling,
tighten the center
column pan lock.
1 Loosen the tilt/pan
bar by turning it
counterclockwise.
Tilt the head to the
desired angle and
tighten the tilt/pan
bar to lock it into
place.
2 Loosen the pan
locking knob to use
the 360° pan feature.
Aim the camera, and
tighten the locking
knob to lock in the
new position.
3 To change the camera
orientation from
landscape to portrait,
loosen the platform
orientation knob. Tilt
the platform 90°, and
tighten the knob to
lock the platform into
the new position.
2 Loosen the center
brace locking collar.
Gently pull the legs
out, and then push
the center brace
all the way down.
Tighten the center
brace locking collar
until secure.
3 Pull out the quick-
release lever and
insert the camera/
plate assembly back
into the head. Push
the quick-release lever
in to lock the quick-
release plate into
place.
If the center column doesn’t slide smoothly, loosen the
center column pan lock.
Important! Don’t raise the
height beyond the center
column’s stop line.
Produktspezifikationen
| Marke: | Magnus |
| Kategorie: | Stativ |
| Modell: | LM-700 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Magnus LM-700 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Stativ Magnus
4 September 2024
4 September 2024
3 September 2024
3 September 2024
3 September 2024
3 September 2024
3 September 2024
3 September 2024
3 September 2024
3 September 2024
Bedienungsanleitung Stativ
- Stativ Hama
- Stativ SilverCrest
- Stativ Sony
- Stativ Trust
- Stativ Panasonic
- Stativ Laserliner
- Stativ Velleman
- Stativ Bresser
- Stativ König
- Stativ Ryobi
- Stativ Braun
- Stativ Pyle
- Stativ Livoo
- Stativ Garmin
- Stativ Kessler
- Stativ Swarovski
- Stativ Marshall Electronics
- Stativ Cullmann
- Stativ Carson
- Stativ DJI
- Stativ AVerMedia
- Stativ Kodak
- Stativ Easypix
- Stativ Rollei
- Stativ Eurolite
- Stativ Testo
- Stativ Kogan
- Stativ GoPro
- Stativ Davis
- Stativ Celestron
- Stativ Levenhuk
- Stativ Joby
- Stativ Manfrotto
- Stativ Vortex
- Stativ Sachtler
- Stativ GVM
- Stativ ARRI
- Stativ Zhiyun
- Stativ Rode
- Stativ Dörr
- Stativ Drift
- Stativ Neewer
- Stativ Ravelli
- Stativ Revo
- Stativ Sunpak
- Stativ Vanguard
- Stativ Velbon
- Stativ Winegard
- Stativ 3 Legged Thing
- Stativ Sky-Watcher
- Stativ Proaim
- Stativ Celly
- Stativ Gitzo
- Stativ Miller
- Stativ Vello
- Stativ Induro
- Stativ Ulanzi
- Stativ Konig & Meyer
- Stativ Libec
- Stativ Glide Gear
- Stativ Benro
- Stativ Slik
- Stativ Oben
- Stativ Vinten
- Stativ Gravity
- Stativ Block & Block
- Stativ Barska
- Stativ Ultimate Support
- Stativ IFootage
- Stativ FeiYu-Tech
- Stativ Easyrig
- Stativ Sirui
- Stativ FeiyuTech
- Stativ On Air
- Stativ Moza
- Stativ IOptron
- Stativ SteadiCam
- Stativ Hohem
- Stativ FLOWCINE
- Stativ Sevenoak
- Stativ Camgear
- Stativ Flycam
- Stativ Acratech
- Stativ ProMediaGear
- Stativ Fidlock
- Stativ Mantona
- Stativ Olloclip
- Stativ SmallRig
- Stativ MOVE'N SEE
- Stativ Kaiser Fototechnik
- Stativ Slidekamera
- Stativ Fat Gecko
- Stativ FLM
- Stativ Peak Design
- Stativ Robus
- Stativ Studio Assets
- Stativ Square Jellyfish
- Stativ Stalco
- Stativ Tiltall
- Stativ E-Image
Neueste Bedienungsanleitung für -Kategorien-
8 Oktober 2024
3 Oktober 2024
2 Oktober 2024
24 September 2024
22 September 2024
20 September 2024
18 September 2024
14 September 2024
14 September 2024
8 September 2024