Magnus GH-M1 Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Magnus GH-M1 (2 Seiten) in der Kategorie Statief. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/2
ONE-YEAR LIMITED WARRANTY
This Magnus product is warranted to the original purchaser to be
free from defects in materials and workmanship under normal
consumer use for a period of one (1) year from the original
purchase date or thirty (30) days after replacement, whichever
occurs later. The warranty provider’s responsibility with respect
to this limited warranty shall be limited solely to repair or
replacement, at the provider’s discretion, of any product that
fails during normal use of this product in its intended manner
and in its intended environment. Inoperability of the product
or part(s) shall be determined by the warranty provider. If the
product has been discontinued, the warranty provider reserves
the right to replace it with a model of equivalent quality and
function.
This warranty does not cover damage or defect caused by misuse,
neglect, accident, alteration, abuse, improper installation or
maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY
PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR
ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED
TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. This warranty provides
you with specific legal rights, and you may also have additional
rights that vary from state to state.
To obtain warranty coverage, contact the Magnus Customer
Service Department to obtain a return merchandise
authorization (“RMA”) number, and return the defective product
to Magnus along with the RMA number and proof of purchase.
Shipment of the defective product is at the purchaser’s own risk
and expense.
For more information or to arrange service, visit www
.magnustripods .com or call Customer Service at 212-594-
2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
Magnus is a registered trademark of the Gradus Group. © 2019
Gradus Group LLC. All Rights Reserved.
GG1
Gimbal Head
Owner’s
Manual
GH-M1
Thank you for choosing Magnus.
The Magnus GH-M1 gimbal-type tripod head is an
ideal accessory for wildlife or sports photography
because it ensures precise and fast camera aiming
with a heavy lens. The GH-M1 mounts onto most
tripods with a 3/8-inch threaded stud, and it’s
designed to balance a lens along its vertical and
horizontal axes. The sturdy curved aluminum main
arm supports up to 30 pounds, yet it balances the load
so that even a large lens feels weightless. Lenses that
are large or heavy enough to prevent quick moving
and aiming can be tilted or swiveled effortlessly
and remain securely in place once positioned. An
Arca-type quick-release plate is included for swift and
secure camera mounting and swapping.
Key Features
Swinging
arm lock
Plate lock Platform locking knob
Pan degree scale
Height scale
Panning base
1/4-20 mounting screw
Swinging arm
Pan lock
Plate platform
Main arm
3/8-16 mounting socket
Quick-release (QR) plate
• Please read and follow these instructions, and keep this
manual in a safe place.
• Do not attempt to attach the base head to a tripod
while a camera attached.
• Remove the camera and lens from the head during
setup or transport.
• Do not exceed the head’s maximum load capacity of
30 pounds (13.6 kg).
• Ensure that all appropriate locks are engaged when
necessary.
• Keep out of reach of children.
• All images are for illustrative purposes only.
User Cautions
Specifications
Base Diameter: 1.9 in. (4.8 cm)
Base Pan Range: 360°
Maximum Load: 30 lb. (13.6 kg)
Width: 8.3 in. (21.1 cm)
Height: 8.3 in. (21.1 cm)
Weight: 2 lb. (0.92 kg)
Mounting the Gimbal to the Tripod
1 Tighten the pan lock until it’s secure.
2 Align the 3/8-16
mounting socket
with the tripod’s
3/8-16 post and
screw it onto the
tripod.
If your tripod has
set screws on the
platform, tighten them
to secure the GH-M1
to the tripod.
Important! Make sure the head is screwed on securely so
there are no gaps between the gimbal and the tripod.
Balancing a Lens
The correct balance is achieved when the lens and camera
can be tilted at any angle—up or down—and remain in
place. With the proper balance, the lens can move effortlessly
and stay pointed in any position without locking the swinging
arm. Carefully follow these steps:
Horizontal Balance
1 Tighten all locking knobs so the camera and lens won’t
accidentally move while mounted on the gimbal.
2 Loosen the plate lock, and adjust the horizontal balance
of the camera and lens. Tighten the plate lock until
secure.
3 Loosen the swinging arm lock, and tilt the lens up and
then down at a 45° angle. If the lens wants to return to
a center position, the camera and lens are horizontally
balanced.
4 Repeat steps 2 and 3 until your lens is balanced along its
horizontal axis.
Vertical Balance
1 Loosen the platform locking knob, and adjust the height
to vertically align the center of the lens with the axis of
the locking knob. Retighten the platform locking knob
after every adjustment.
Attaching the Quick-Release Plate to
the Lens
The Arca-type quick-release plate has a 1/4-inch
mounting screw that attaches to most lens collars. Use
a 3/8-16 bushing (not included) if your lens collar has a
3/8-16 socket.
Warning! Always hold your camera and lens while
following the attaching and balancing instructions.
1 Remove the quick-release plate by loosening the
plate lock and lifting it off the plate platform.
2 Attach the quick-release plate screw with the D-ring.
Tighten the screws with a coin, slotted screwdriver,
or hex key.
Mounting a Lens
1 Tighten the swinging arm lock, pan lock, and
platform locking knob. Make sure they are secure
before proceeding.
2 Loosen the plate lock, and place the quick-release
plate/lens assembly into the grooves of the plate
platform.
3 Make sure the quick-release plate is seated properly
in the plate platform, and tighten the plate lock until
secure.
Pro Tips
• It might take several attempts to balance your camera
and lens for the first time. Be patient when following the
instructions above.
• For each setup, use masking tape or a grease pencil
to note the position of the height scale and the quick-
release plate. This will make balancing the camera and
lens much faster in the future.
• To maximize image sharpness, support the camera with
your right hand while resting your left hand on the front
the of the lens.
2 After each adjustment, test the balance by pointing the
lens up and down. If the lens and camera can be tilted
at any angle and remain in place, they are now vertically
balanced.
Produktspezifikationen
| Marke: | Magnus |
| Kategorie: | Statief |
| Modell: | GH-M1 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Magnus GH-M1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Statief Magnus
4 September 2024
4 September 2024
3 September 2024
3 September 2024
3 September 2024
3 September 2024
3 September 2024
3 September 2024
3 September 2024
3 September 2024
Bedienungsanleitung Statief
- Statief Hama
- Statief SilverCrest
- Statief Sony
- Statief Trust
- Statief Laserliner
- Statief König
- Statief Pyle
- Statief Marshall Electronics
- Statief Cullmann
- Statief Carson
- Statief DJI
- Statief Kodak
- Statief Easypix
- Statief Rollei
- Statief Eurolite
- Statief Testo
- Statief Kogan
- Statief Celestron
- Statief Levenhuk
- Statief Joby
- Statief Manfrotto
- Statief Vortex
- Statief Sachtler
- Statief GVM
- Statief ARRI
- Statief Zhiyun
- Statief Rode
- Statief Neewer
- Statief Ravelli
- Statief Revo
- Statief Sunpak
- Statief Vanguard
- Statief Velbon
- Statief 3 Legged Thing
- Statief Proaim
- Statief Celly
- Statief Gitzo
- Statief Miller
- Statief Vello
- Statief Konig & Meyer
- Statief Libec
- Statief Glide Gear
- Statief Benro
- Statief Slik
- Statief Oben
- Statief Vinten
- Statief Gravity
- Statief Barska
- Statief IFootage
- Statief FeiYu-Tech
- Statief Easyrig
- Statief FeiyuTech
- Statief On Air
- Statief IOptron
- Statief SteadiCam
- Statief Hohem
- Statief Sevenoak
- Statief Camgear
- Statief Flycam
- Statief ProMediaGear
- Statief Fidlock
- Statief Olloclip
- Statief SmallRig
- Statief MOVE'N SEE
- Statief Kaiser Fototechnik
- Statief Slidekamera
- Statief Fat Gecko
- Statief FLM
- Statief Peak Design
- Statief Robus
- Statief Studio Assets
- Statief Square Jellyfish
- Statief Stalco
- Statief Tiltall
- Statief E-Image
Neueste Bedienungsanleitung für -Kategorien-
18 September 2024
14 September 2024
14 September 2024
8 September 2024
7 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024