Maestro MR314C Bedienungsanleitung
Maestro
Bügeleisen
MR314C
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Maestro MR314C (23 Seiten) in der Kategorie Bügeleisen. Dieser Bedienungsanleitung war für 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/23
Owners manual. Steam iron
Bedienungsanleitung. Dampfbügeleisen
Instrukcji obsługi. Żelazko parowe
Manualul proprietarului. Fier cu abur
Руководство по эксплуатации. Паровой утюг
Керівництво з експлуатації. Парова праска
EN
DE
PL
UA
RU
RO
Model/Модель: MR314C
Сerticated in Ukraine
Виріб сертифіковано в Україні
091
2 3
Dear customer, we thank you for purchase of goods
Functionality, design and conformity to the quality standards guarantee to you reliability
and convenience in use of this device.
Please read and comply with these original instructions prior to the initial operation of your
appliance and store them for later use of subsequent owners.
This appliance is designed for domestic use only.
Under condition of observance of user regulations and a special-purpose designation,
a parts of appliance do not contain unhealthy substances.
Technical specications
Model MR314C
Electrical supply:
Alternating current- AC;
Rated voltage: 220-240V;
Rated frequency: 50Hz;
Power consumption: 2200 W;
Protective class I
Protection class IPX0
Operating modes: dry ironing, steam ironing, ironing with spray.
Addition functions:
«Burst or Steam shot» This function provides an extra amount of steam to remove
stubborn wrinkles.
«Vertical Steam» this function allows to steam clothes or curtains in vertical position;
«Anti-drip system» With the anti-drip system, you can perfectly iron even the most
delicate fabrics. Always iron these fabrics at low temperatures. The plate may cool down
to the point where no more steam comes out, but rather drops of boiling water that can
leave marks or stains. In these cases, the Anti-drip system automatically activates to
prevent vaporization, so that you can iron the most delicate fabrics without risk of spoiling
or staining them.
«Anti-calc system» A special resin lter inside the water reservoir softens the water
and prevents calc build-up in the plate. The resin lter is permanent and does not need
EN
2.1
2.5
2.2
2.6
2.3
2.7
2.4
2.8
1
2
1
2
3
457
8
6
9
10
11 13 12
Pictures/ Bilder/Rysunki/ Figuri/ Рисунки/ Малюнки
Pictures/ Bilder/Rysunki/ Figuri/ Рисунки/ Малюнки
4 5
replacing. Please note:
Use tap water only. Distilled and/demineralised water makes the «Zero-Calc” anti-calc
system ineffective by altering its physicochemical characteristics.
Do not use chemical additives, scented substances or decalciers. Failure to comply with
the above-mentioned regulations leads to the loss of guarantee.
Description of the appliance
Picture1 (Illustrations on page 2)
1 - spray nozzle
2 - ller door
3 - steam/dry and self-cleaning adjustment knob
4 - spray button
5 - shot steam button
6 - power cord
7 –handle
Safety instructions
When using your appliance, basic safety precautions should always be followed,
including the following:
SPECIAL INSTRUCTIONS
Warning!
NEVER immerse the iron, cable or plug in any liquid.
NEVER touch the appliance with wet or damp hands.
ALWAYS disconnect iron from electrical outlet when lling with water or emptying and when
not in use.
Otherwise, there is a risk to get an electric shock!
DO NOT let children or untrained persons use the appliance without supervision.
DO NOT leave the hot iron touching fabrics or very inammable surfaces.
DO NOT leave the appliance unnecessarily plugged in. Disconnect the plug from the mains
when the appliance is not being used.
DO NOT use the power cord or the appliance in order to pull the plug out of the socket.
DO NOT leave the appliance exposed to the weather (rain, sun, etc. ).
DO NOT leave the iron without supervision when it is connected to the power supply.
INSTRUCTIONS BEFORE USING
- Use iron only for its intended use.
- To protect against a risk of electric shock, do not immerse the iron in water or other
liquids.
- The iron should always be turned to ‘ Off ’ before plugging or unplugging from outlet.
Never yank cord to disconnect from outlet; instead, grasp plug and pull to disconnect.
- Do not allow cord to touch hot surfaces. Let iron cool completely before putting
away. Loop cord loosely around iron when storing.
- Do not operate iron with a damaged cord or if the iron has been dropped or
damaged. To avoid the risk of electric shock, do not disassemble the iron take it to a
qualied serviceman for examination and repair. Incorrect reassembly can cause a risk of
electric shock when the iron is used.
- Close supervision is necessary for any appliance being used by or near children. Do not
leave iron unattended while connected or on an ironing board.
- Burns can occur from touching hot metal parts, hot water, or steam. Use caution when
you turn a steam iron upside down - there may be hot water in the reservoir.
- Do not use it for commercial purpose.
Please note! Do not use chemical additive, scented substances or decalciers. Failure to
comply with the above-mentioned regulations leads to the loss of guarantee.
Operation
BEFORE STARTUP
Before the rst use remove a protective lm (at presence) from an iron sole.
Make sure that all the parts of appliance don’t have damages.
Please note! When using the iron for the rst time, you may notice a slight emission of
smoke and hear some sounds made by the expanding plastics. This is quite normal and it
stops after a short time. We also recommend passing the iron over an ordinary cloth before
using it for the rst time.
Soft the laundry to be ironed according to the international symbols on the garment label,
or if this is missing, according to the type of fabric.
GARMENT FABRIC THERMOSTAT LABEL TYPE REGULATION
Table 1
Start ironing the garments requiring a low temperature.
This reduces the waiting times (the iron takes less time to heat up than to cool down) and
eliminates the risk of scorching the fabric.
Signs on labels Type of fabric Thermostat positions
Synthetic ●
Low temperature
Silk - wool ●●
Medium temperature
Cotton - linen ●●●
High temperature
Fabric not to be ironed
EN
8 - temperature control light
9 - thermostat adjustment knob
10 - water tank
11 - sole plate with holes for steam
12 - self- cleaning button
13 - maximum water level
6 7
STEAM IRONING
- Filling the reservoir
Please note! Do not use chemical additive, scented substances or decalciers.
- Check that the plug is disconnected from the socket.
- Move the steam selector (3/Picture 1) to “0” (Picture 2.1).
- Open the lid (2/Picture 1)
- Raise the tip of the iron to help the water enter the opening without overowing.
- Slowly pour the water into the water tank Picture 2.2 using the special measure and
taking care not to go over the maximum level indicated by “MAX” on the reservoir
- Close the lid (2/Picture 1).
SELECTING THE TEMPERATURE Picture 2.3
- Put the iron in a vertical position.
- Put the plug in the socket.
- Adjust the thermostat knob (9/Picture 1) according to the international symbol on the
garment label [Table1]. The plate temperature control light (8/Picture 1) indicates that the
iron is heating up. Wait until the plate temperature control light goes off before ironing.
Warning: during ironing, the plate temperature control light (8/Picture 1) comes on at
intervals, indicating that the selected temperature is maintained. If you lower the thermostat
temperature after ironing at a high temperature, do not start ironing until the plate
temperature control light comes on again.
SELECTING THE STEAM Picture 2.1
The quantity of steam is regulated by the steam selector (3/Picture 1).
- Move the steam selector to a position between minimum and maximum depending
on the quantity of steam required and the temperature selected.
Please note: the iron gives off steam continuously only if you hold the iron horizontally.
You can stop the continuous steam by placing the iron in a vertical position or by moving
the steam selector to «0». As indicated on the thermostat knob and in the initial table, you
can only use steam at the highest temperatures. If the selected temperature is too low,
water may drip onto the plate.
Selecting Steam shot and steam when ironing vertically. Pictures 2.4-2.5
Press the steam shot button (5/Picture 1) to generate a powerful burst of steam that can
penetrate the fabrics and smooth the most difcult and tough creases. Wait for a few
seconds before pressing again.
By pressing the steam shot button at intervals you can also iron vertically (curtains, hung
garments, etc.).
Warning: the steam shot function can only be used at high temperatures. Stop the
EN
emission when the plate temperature control light (8/Picture 1) comes on, than
start ironing again only after the light has gone off.
DRY IRONING
To iron without steam, follow the instructions in section “steam ironing”, leaving the steam
selector (8/Picture 1) in the position ”no steam”.
SPRAY FUNCTION Picture 2.6
Make sure that there is water in the water tank. Press the spray button (4/Picture 1) slowly
(for a dense spray) or quickly (for a vaporized spray).
Warning: for delicate fabrics, we recommend moistening the fabric beforehand using the
spray function , or putting a damp cloth between the iron and the fabric. To avoid staining,
spray on silk or synthetic fabrics.
SELF-CLEANING
The self-cleaning feature cleans inside the plate, removing impurities. We recommend
using it every 10-15 days. Directions:
-Fill the reservoir according to the “lling the water reservoir” section.
-Plug the product into a standard electrical outlet near a sink , turn the temperature control
dial the MAX position, rest the heel of the iron on a at, stable surface and allow it to heat
until the temperature light (8/Picture 1) goes out.
-Hold the iron horizontally over the sink and press the button (12/Picture 1) ”self-clean”.
- When the soleplate has cooled down, you can clean it with a damp cloth.
Maintenance and care
Warning!
Before cleaning the iron in any way, make sure that the appliance plug is not connected to
the socket.
Before cleaning unplug the appliance and let it cool completely.
Do not let water get inside the appliance, except the parts are special made for it.
-Avoid scratching the plate with steel wool or metallic objects.
-Any deposits, starch residue or size left on the plate can be removed using a damp cloth
or an unabrasive liquid detergent.
The plastic parts can be cleaned with a damp cloth then wiped over with a dry cloth.
Storage
- Before cleaning unplug the appliance and let it cool completely.
- Turn the temperature control dial and steam adjustment knob to the «0» position.
- Open ller cover, turn appliance upside down and pour out the water.
- Keep the appliance in cool dry place, away from children and persons with reduced
mental or physical abilities Picture 2.8.
Produktspezifikationen
| Marke: | Maestro |
| Kategorie: | Bügeleisen |
| Modell: | MR314C |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Maestro MR314C benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Bügeleisen Maestro
8 Oktober 2022
Bedienungsanleitung Bügeleisen
- Bügeleisen Sinbo
- Bügeleisen AFK
- Bügeleisen Clatronic
- Bügeleisen Domo
- Bügeleisen Emerio
- Bügeleisen Coline
- Bügeleisen Tristar
- Bügeleisen Philips
- Bügeleisen SilverCrest
- Bügeleisen Hanseatic
- Bügeleisen Panasonic
- Bügeleisen Tchibo
- Bügeleisen Clas Ohlson
- Bügeleisen Adler
- Bügeleisen Beper
- Bügeleisen Bestron
- Bügeleisen Camry
- Bügeleisen Trisa
- Bügeleisen Bosch
- Bügeleisen AEG
- Bügeleisen Siemens
- Bügeleisen Electrolux
- Bügeleisen Gorenje
- Bügeleisen Jata
- Bügeleisen Klarstein
- Bügeleisen Miele
- Bügeleisen Severin
- Bügeleisen Unold
- Bügeleisen Bomann
- Bügeleisen First Austria
- Bügeleisen OK
- Bügeleisen Russell Hobbs
- Bügeleisen Studio
- Bügeleisen Taurus
- Bügeleisen Tefal
- Bügeleisen Mesko
- Bügeleisen BEKO
- Bügeleisen Blaupunkt
- Bügeleisen Eldom
- Bügeleisen Inventum
- Bügeleisen Palson
- Bügeleisen Primo
- Bügeleisen Solac
- Bügeleisen Tomado
- Bügeleisen Alpina
- Bügeleisen Eudora
- Bügeleisen Exquisit
- Bügeleisen High One
- Bügeleisen Privileg
- Bügeleisen Zanussi
- Bügeleisen DeLonghi
- Bügeleisen Singer
- Bügeleisen Termozeta
- Bügeleisen Laurastar
- Bügeleisen Nova
- Bügeleisen Watshome
Neueste Bedienungsanleitung für -Kategorien-
4 Mai 2024
9 April 2024
3 April 2024
19 März 2024
26 Februar 2024
10 Februar 2024
28 Januar 2024
25 Januar 2024
30 Dezember 2023
24 Dezember 2023