M-Audio Keystation Pro 88 Bedienungsanleitung

M-Audio Nicht kategorisiert Keystation Pro 88

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für M-Audio Keystation Pro 88 (27 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 34 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/27
Keystation Pro 88 Advanced Guide
Contents:
1 Getting Started
2 Terminology
3 Performance Operations of the Keystation Pro 88
• Sending Program Changes During Performance
• Sending Bank Changes During Performance
• Sending Snap Shot
• Muting All Controllers
• Drawbar Mode
• Changing Zones
4 Programming and Editing the Keystation Pro 88
• Introduction to Programming Options
• Selecting a Controller for Editing
• Assigning MIDI CCs
• Assigning an Individual MIDI Channel
• Changing the Global Channel
• Setting Toggle Values for the Buttons
• RPN/NRPN, SysEx and Other Advanced Messages
• Assigning MMC Control to a Button
• Assigning RPN/NRPN to a Fader/Rotary Controller
• Assigning a Note to a Button
• About SysEx Messages and Device ID
• Non-Volatile Memory
• Memory Dump
• Assigning Device ID
• Resetting to the Factory Default Setting
• Save/Recall of Individual Groups of Controllers
• Programming Zones
• How to Transpose or Change the Octave of a Zone
• The Program, Bank LSB and Bank MSB of a Zone
• Setting the Channel of a Zone
• Group A Controllers
5 The Evolution Librarian
• About the Librarian Software
• Installing the Librarian Software
• Setting Up the Librarian Software
• Librarian Overview
• Organizing Presets Received from a Device
• Viewing The Contents of a Memory
• Saving a Setup
• Loading a Setup
6 MIDI In/Out and MIDI Messages Explained
• MIDI In / Out Signal Flow Diagram
• About the MIDI In Port
• About the MIDI Out Port
• Program and Bank Changes Explained
• RPN / NRPRs Explained
• SysEx Explained
7 Appendices
• Appendix A – MIDI Implementation Chart
• Appendix B1 – Assignable MIDI CC’s (Faders & Rotary Controllers)
• Appendix B2 – Assignable MIDI CC’s (Buttons)
• Appendix C – Hexadecimal Conversion Chart
• Appendix D1 – General MIDI Instruments
• Appendix D2 – MIDI Note Numbers
• Appendix E – Standard MIDI Controller Numbers (MIDI CC’s)
1 Getting Started
Before you begin the Keystation Pro 88 Advanced Guide, we suggest that you take the
time to familiarize yourself with the Getting Started Guide, a printed manual that
accompanied your Keystation Pro 88. (You can also download the Getting Started
Guide from www.m-audio.com.)
The Getting Started Guide provides an explanation of the Keystation Pro 88’s layout and
basic functions. This manual builds on the Getting Started Guide to give you a full
understanding of the powerful features of the Keystation Pro 88.
2 Terminology
In order to get the most out of this Guide, please familiarize yourself with the following terms:
Edit Mode:
Edit Mode describes the short period of time (three seconds) after a function button has
been pressed, during which time the parameters of that function can be altered via the
numeric keypad. No data is sent out of the Keystation Pro 88 when it is in Edit Mode,
except for Program and Bank Changes. LCD symbols shown in Edit Mode indicate that
a particular parameter can be edited. If a number is partially entered and a new
controller turned, that number will become the relevant parameter number for the new
controller and the three second editing period will retrigger.
Default Mode:
Default Mode describes the state of the Keystation Pro 88 when no function buttons
have been pressed within the last three seconds. In Default Mode, the LCD shows the
controller symbol, and the two-digit display shows the last selected controller. The three-
digit display shows the currently assigned MIDI CC number.
Zone Edit Mode:
Zone Edit Mode describes the period of time between the pressing of a Zone Range
button—or the selection of a Group A controller—and when the operation becomes
complete. During Zone Edit Mode, the LEDs above the Zone buttons will flash to indicate
that the Zones can be selected for editing. The LCD will also flash the Zones that are
currently selected for editing.
3 Performance Operations of the Keystation Pro 88
Sending Program Changes During Performance
You can send out a Program Change message to your sound module, instrument or any
other device that will receive this standard MIDI message. The Program Change will be
sent on the Zones that are active at that time.


Produktspezifikationen

Marke: M-Audio
Kategorie: Nicht kategorisiert
Modell: Keystation Pro 88

Brauchst du Hilfe?

Wenn Sie Hilfe mit M-Audio Keystation Pro 88 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert M-Audio

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-