London Clock NX189 Bedienungsanleitung

London Clock Radiowecker NX189

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für London Clock NX189 (5 Seiten) in der Kategorie Radiowecker. Dieser Bedienungsanleitung war für 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/5

Thank you for your purchase of this radio controlled alarm clock. Please note that this clock may take up to 24

hours to receive a signal. Please read these instructions carefully and keep the manual for future reference.

INSTALLATION

1. Place your clock face down on a flat and soft surface.

2. Remove the battery cover at the back of the clock.

3. Insert 2 x new AAA batteries into the battery compartment by observing the - correct “+” and “ “ polarity.

4. Replace the battery cover.

FUNCTIONS

RADIO CONTROL FUNCTION

Your new clock is designed to set the time automatically in the United Kingdom only, via a transmitted radio

signal.

As with all wireless devices, the ability to receive the signal may be affected by, but not limited to, the following

circumstances:

 Long transmitting distance

 Nearby mountains and valleys

 Among tall buildings

 Near railways, high voltage cables etc

 Near motorways, airports etc

 Near construction site

 Inside concrete buildings

 Near electrical appliances

 Near computers and TVs

 Inside moving vehicles

 Near metallic structures

Place your clock at a location with optimal signal, ie close to a window and away from metal surfaces or

electrical appliances. If the clock does not pick up signal within 24 hours, try the clock in a different location.

AUTOMATIC TIME SETTING

1. Once you have inserted the batteries, the alarm clock will beep and will show default settings (12:00 as

the time and 1/1 as the date and month). The radio control icon ( will begin to flash, which indicates )

that the clock is receiving signal.

2. Please see the below indications for help with understanding if the time has been set successfully.

If there is a weak or no signal - the icon will flash

If the clock is receiving a strong signal the icon will flash –

If the clock has successful reception - the icon will become static

If the clock has failed reception the icon will disappear –

3. Your clock will start automatic reception everyday at 1:00, 2:00 and 3:00. If it fails to receive the time

signal at 3:00, it will start reception at 4:00. If it fails again, it will start reception at 5:00. If it fails again, it

will start automatic reception at 1:00 again the next day.

MANUAL RECEPTION: Press and hold the button on the back of the clock for 3 seconds to start manual C/F/

reception. To stop manual reception, press and hold the button on the back of the clock for 3 seconds. C/F/

Please note that when your clock is receiving the radio controlled signal, all buttons expect the “Snooze.Light”

button on the top of the clock will not function.

TO SET THE TIME, 12/24HR TIME AND CALENDAR

Please note that during the below process, if the clock is left untouched for 10 seconds, the clock will return to

the normal time display mode.

1. The setting will occur in the following sequence: Hour→ Minute→ 12HR/24HR→ Year→ Month→ Date→

Snooze Duration.

2. Press and hold the “SET” button on the back of the clock for 5 seconds, until the hour digit begins to

flash. Use the buttons on the back of the clock to select the correct hour. (Press and hold or C/F/

the buttons to accelerate setting). The hour only needs to be set if no radio control signal or C/F/

can be received. Press the “SET” button on the back of the clock to confirm.

3. The minute digit will now flash. Use the or C/F/ buttons on the back of the clock to select the

correct minute. (Press and hold the buttons to accelerate setting). The minute only needs or C/F/

to be set if no radio control signal can be received. Press the “SET” button on the back of the clock to

confirm.

4. The time digits will now flash 12Hr. Use the or C/F/ buttons on the back of the clock to select 12Hr

or 24Hr. If you select 12Hr format, “P” will appear to the left of the time digits to indicate the afternoon

time. There is no AM icon to indicate the time before noon. Once you have chosen 12Hr or 24Hr, press

the “SET” button on the back of the clock to confirm.

5. The year will now flash. Use the or C/F/ buttons on the back of the clock to select the correct

year. (Press and hold the buttons to accelerate setting). or C/F/ Press the “SET” button on the

back of the clock to confirm.

6. The month digit will now flash. Use the or C/F/ buttons on the back of the clock to select the

correct month. (Press and hold the buttons to accelerate setting). or C/F/ Press the “SET” button

on the back of the clock to confirm.

7. The date digit will now flash. Use the or C/F/ buttons on the back of the clock to select the

correct date. (Press and hold the buttons to accelerate setting). The day will change or C/F/

automatically according to the date. Press the “SET” button on the back of the clock to confirm.

8. The LCD display will now change to “05”. Use the or C/F/ buttons on the back of the clock to

select the desired snooze duration please note snooze duration can be selected from 5 to 60 minutes. –

(Press and hold the or C/F/ buttons to accelerate setting). Press the “SET” button on the back of

the clock to confirm and return to normal time display.

TO SET ALARM 1

Please note that during the below process, if the clock is left untouched for 10 seconds, the clock will return to

the normal time display mode.

1. With the clock in normal time display, press the “SET” button on the back of the clock once, 6:00 (AM)

and will appear.

2. Press and hold the “SET” button on the back of the clock for 5 seconds, until the hour digit flashes. U se

the buttons on the back of the clock to select the desired hour for Alarm 1. (Press and or C/F/

hold the he back of the clock to or C/F/ buttons to accelerate setting). Press the “SET” button on t

confirm.

3. The minute digit will now flash. Use the or C/F/ buttons on the back of the clock to select the

desired minute for Alarm 1. (Press and hold the buttons to accelerate setting). Press the or C/F/

“SET” button on the back of the clock to confirm and return to normal time display.

TO SET ALARM 2

Please note that during the below process, if the clock is left untouched for 10 seconds, the clock will return to

the normal time display mode.

1. With the clock in normal time display, press the “SET” button on the back of the clock twice, 6:00 (AM)

and will appear.

2. Press and hold the “SET” button on the back of the clock for 5 seconds, until the hour digit flashes. Use

the buttons on the back of the clock to select the desired hour for Alarm 2. (Press and or C/F/

hold the buttons to he back of the clock to or C/F/ accelerate setting). Press the “SET” button on t

confirm.

3. The minute digit will now flash. U the se or C/F/ buttons on the back of the clock to select the

desired minute for Alarm 2. (Press and hold the buttons to accelerate setting). Press the or C/F/

“SET” button on the back of the clock to confirm and return to normal time display.

Please note the duration of the alarm is 2 minutes.

TO TURN ALARM 1 AND 2 ON AND OFF

With the clock in normal time display:

1. Press the “ALM 1.2” button on the back of the clock once to activate Alarm 1. will appear to

indicate Alarm 1 has been activated.

2. Press the “ALM 1.2” button on the back of the clock twice to activate Alarm 2. will appear to

indicate Alarm 2 has been activated.

3. Press the “ALM 1.2” button on the back of the clock three times to activate both Alarm 1 and 2. Both

and will appear to indicate Alarm 1 and Alarm 2 have been activated.

4. Press the “ALM 1.2” button on the back of the clock four times to deactivate both alarms. Both and

will disappear to indicate that both alarms have been deactivated.

Produktspezifikationen

Marke:	London Clock
Kategorie:	Radiowecker
Modell:	NX189

Brauchst du Hilfe?

Wenn Sie Hilfe mit London Clock NX189 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Radiowecker London Clock

London Clock NX189 Bedienungsanleitung

31 August 2024

Bedienungsanleitung Radiowecker

Neueste Bedienungsanleitung für -Kategorien-

Logik LCRA14 Bedienungsanleitung

16 Oktober 2024

Insignia NS-ALCL24 Bedienungsanleitung

15 Oktober 2024

ICES ICR-232 Bedienungsanleitung

13 Oktober 2024

AEG MRC 4116 Bedienungsanleitung

13 Oktober 2024

Caliber HCG015 Bedienungsanleitung

11 Oktober 2024

Grundig Sonoclock 50L Bedienungsanleitung

8 Oktober 2024

La Crosse Technology soluna W74146 Bedienungsanleitung

8 Oktober 2024

La Crosse Technology 616A-30357 Bedienungsanleitung

7 Oktober 2024

Muse M-188P Bedienungsanleitung

5 Oktober 2024

La Crosse Technology 617-710 Bedienungsanleitung

3 Oktober 2024