Logik L16BS11 Bedienungsanleitung

Logik Mixer L16BS11

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Logik L16BS11 (2 Seiten) in der Kategorie Mixer. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
Blender
Instruction Manual
L16BS11
GB-4 GB-5
Thank you for purchasing your new Logik Blender.
We recommend that you spend some time reading this instruction
manual in order to fully understand all the operational features it
offers.
Read all the safety instructions carefully before use and keep this
instruction manual for future reference.
SAFETY FIRST!
Please follow all the safety precautions listed below for safety and to reduce the risk of injury or
electrical shock.
• Read all the instructions carefully before using your appliance and keep them for future reference.
• Unplug the appliance from the mains supply when not in use, when removing or attaching the
blender jug, or before cleaning any part of the appliance.
• This appliance is for household use only. Do not use it for professional catering.
• Do not use the appliance outdoors.
• Do not immerse the appliance base unit or the mains cable or plug in liquids.
• Do not use the appliance near a source of heat or on an unstable surface.
• Do not use your appliance in damp or wet conditions.
• Never let children operate this appliance. Close supervision is necessary when this appliance is
used near children.
• This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge unless they have been given
supervision or instruction concerning the use of the appliance by a person responsible for their
safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Ensure that the mains cable does not touch any hot surface and that it does not overhang the
edge of your work surface.
• There are no user serviceable parts in your appliance.
• Do not operate the appliance with a damaged mains cable or mains plug or after the appliance or
any attachment has been damaged. Seek qualied technicians for assistance.
• If the mains cable is damaged it must be replaced by the manufacturer, its service agent, or
similarly qualied persons in order to avoid a hazard.
• Do not use attachments or accessories which are not recommended by the manufacturer. They
may cause malfunction or injury.
• Store the appliance away from direct sunlight and out of the reach of children.
When operating your blender:
• Do not place your hand in the blender jug. The sharp blade may cause injury.
• Never insert any hard object or implement into the blender jug when it is operating. This may
cause damage to the appliance and personal injury.
• Do not place meat containing bones or fruits with large hard stones in the blender jug.
• If the blender becomes clogged, switch off and unplug the mains cable from the mains socket
before cleaning the obstruction. Check carefully for damage.
• Do not use the appliance for any purpose not expressly specied in this manual.
CLEANING
Cleaning the blender jug:
1. Pour about 500ml of warm soapy water into the jug and place the jug on the
base.
2. Turn and hold the Speed Selector to ‘P’ for a few seconds to loosen any food
particles and free them from the blades.
• Remove the jug, pour away the water and rinse in fresh running water.
Repeat 1 and 2 with fresh water.
• Alternatively the jug may be immersed in warm soapy water and cleaned
using a long handled brush. Do not touch the blades when cleaning.
Wash the lid and stopper separately in warm soapy water, rinse and allow to
dry.
• DO NOT wash the jug or attachments in a dishwasher.
Cleaning the base:
• Ensure the blender is switched off and unplugged from the mains.
Wipe the outer surface of the motor unit with a damp cloth. Never use abrasive
cleaners or scouring creams.
STORAGE
After all the components have been washed and dried, re-assemble the blender
and store it out of direct sunlight and out of the reach of children.
The cable may be wound around the lugs at the bottom of the appliance for
easier storage.
SPECIFICATIONS
Power : 230V~50Hz, 500W
Capacity of Jug : 1.6 litres max.
Duty Cycle : 3 minutes ON; 5 minutes OFF
We continually strive to improve our products, specications may change without
prior notice.
DSG Retail Ltd • Maylands Avenue • Hemel Hempstead
Herts • HP2 7TG • England
Visit Partmaster.co.uk today for the easiest way to buy
electrical spares and accessories. With over 1 million
spares and accessories available we can deliver direct to
your door the very next day. Visit www.partmaster.co.uk or call 0844 800 3456 (UK
customers only) Calls charged at National Rate.
This symbol on the product or in the instructions means that your
electrical and electronic equipment should be disposed at the end of its
life separately from your household waste. There are separate collection
systems for recycling in the EU. For more information, please contact the
local authority or your retailer where you purchased the product.
(P.N.: L16BS11-002)
Always operate blender with cover in place.
The jug body should be handled carefully. The jug contains moving
parts - do not leave the jug immersed in water for any longer than
necessary to clean it or you may affect the operating performance of
the blender.
Replacement Part Part Number
NOTE: If you require a replacement for any of the items listed below, please quote
their corresponding part numbers:
Blender Jug HY1101G003
Blender Jug Cover HY1101G002
Stopper / Measuring Cup HY1101G005
GB-1 GB-2 GB-3
UNPACKING
Remove all packaging from the blender. Retain the packaging. If you dispose of it
please do so according to any local regulations.
The following items are included:
The Main Unit
Blender Jug (P.N.: HY1101G003)
Blender Jug Cover (P.N.: HY1101G002)
Stopper / Measuring Cup (P.N.: HY1101G005)
Insturction Manual (P.N.: L16BS11-002)
PREPARING AND FILLING THE INGREDIENTS
1. Cut the ingredients into 25mm (1”) cubes before placing them into the blender jug.
If the food is very solid or dry, cut the pieces into smaller cubes.
2. Fill the blender jug with the ingredients.
3. Do not overll the jug. The maximum capacity is 1600 ml, but we suggest you do
not exceed 1250 ml. If you are preparing a large quantity use several smaller
batches.
4. If the ingredients are very dry, put some liquid into the jug. You should never try to
reduce dry ingredients in the blender.
FITTING THE LID
1. Place the lid on the top of the jug and pull the lid.
FITTING THE STOPPER
The stopper has an integral measuring cup
useful for measuring small amounts of
ingredients.
Place the stopper in the slots in the lid and
turn clockwise to lock.
To avoid splashing, always operate the
blender with the stopper rmly in place.
OPERATION
1. Make sure the jug and the lid are secure and in the LOCK position.
2. Set the selector switch to ‘0’.
3. Plug your blender into the mains and switch on the power.
AFTER USE
After you have nished blending:
1. Set the Speed Selector to ‘0’.
2. Hold the jug by the handle and carefully turn it clockwise (towards you) to
release the jug. (This may be easier with one hand on the base and one hand
holding the jug handle).
3. To pour out the contents, rotate the lid of the jug anticlockwise to free it and
then lift off the lid. Pour or spoon the contents out carefully.
4. Unplug the blender from the mains socket.
FIRST TIME USE
1. Before using your blender for the rst time, wash the jug, blade assembly, lid and
stopper. Rinse throughly and dry.
2. Place the base unit on a stable surface, free from heat and moisture and within
easy reach of a mains socket. The mains cable should not be taut.
PRODUCT OVERVIEW
Safety Lid
1
Water Fill Level
2
Speed Selector
3
Base Unit
4
Blade Assembly
7
Stopper/Measuring Cup
5
Handle
6
Mains Cable
8
Do not run the appliance continuously for more than 3 minutes. After a full
3 minute cycle allow the blender to rest for another 5 minutes before
using it again.
• Always operate blender
with cover in place.
FITTING THE JUG TO THE BASE UNIT
Place the jug on the blade assembly as shown.
The jug will t only one way round. If the jug is
not properly tted to the base the blender will
not start.
The lid must be secured to the jug
and the jug to the base otherwise
the blender will not operate!
• Do not run the appliance continuously for more than 3 minutes.
After a full 3 minute cycle allow the blender to rest for another 5
minutes before using it again.
• Never blend very hot liquids in the blender. This is dangerous as the
contents may erupt.
• If you spill liquid on the blender base immediately switch off and
wipe dry
During blending, you can feed in small amounts of food or liquid through the jug
lid. To do this:
1. Hold the lid.
2. Turn the stopper slowly anti-clockwise to free it and then lift it out.
3. Gradually feed pieces of food or liquids into the jug through the feeder.
4. Fit the stopper back when you have nished.
Blender's Operation Modes
• Select the desired operating speed. There are 2
speeds. Move the Speed Selector progressively to
the right to increase the speed. When you start
blending use a low speed to begin with and
gradually increase the speed if necessary.
To stop the operation, turn the Speed Selector
back to ‘0’.
Use this mode when ingredients need to be
blended in small repeated bursts.
Turn the Speed Selector to ‘P’ and hold it there for
a short period of time.
To stop the operation, release the Speed Selector
which will then automatically return to ‘0’.
Continuous (Normal)
operation
Pulsed operation
1
5
6
7
8
2
3
4
If items are missing or damaged, please contact Partmaster (UK only).
Tel: 0844 800 3456 for assistance.


Produktspezifikationen

Marke: Logik
Kategorie: Mixer
Modell: L16BS11

Brauchst du Hilfe?

Wenn Sie Hilfe mit Logik L16BS11 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Mixer Logik

Bedienungsanleitung Mixer

Neueste Bedienungsanleitung für -Kategorien-