Logik L14VR12 Bedienungsanleitung

Logik Staubsauger L14VR12

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Logik L14VR12 (2 Seiten) in der Kategorie Staubsauger. Dieser Bedienungsanleitung war für 27 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/2
Thank You for purchasing your new Logik Bagless Cylinder Vacuum Cleaner.
We recommend that you spend some time reading this instruction manual in order to
fully understand all the operational features it offers.
Read all the safety instructions carefully before use and keep this instruction manual
for future reference.
If items are missing or damaged, please contact Partmaster (UK only).
Tel: 0844 800 3456 for assistance.
GB-5
DSG Retail Ltd • Maylands Avenue • Hemel Hempstead
Herts • HP2 7TG • England
Visit Partmaster.co.uk today for the easiest way to buy
electrical spares and accessories. With over 1 million
spares and accessories available we can deliver direct
to your door the very next day. Visit www.partmaster.co.uk or call 0844 800 3456 (UK
customers only) Calls charged at National Rate.
This symbol on the product or in the instructions means that your
electrical and electronic equipment should be disposed at the end of its
life separately from your household waste. There are separate collection
systems for recycling in the EU. For more information, please contact the
local authority or your retailer where you purchased the product.
(P.N. CH830A-IM)
GB-4
Bagless Cylinder
Vacuum Cleaner
Instruction Manual
L14VR12
UNPACKING
Remove all packaging from the unit. Retain the packaging. If you dispose of it please do so
according to any local regulations.
The following items are included:
SAFETY FIRST!
For your continued safety and to reduce the risk of injury or electric shock, please follow all the
safety precautions listed below.
• Read all the instructions carefully before using the appliance and keep them for future
reference.
• Retain the manual. If you pass the appliance onto a third party make sure to include this
manual.
• Check that the voltage marked on the rating label matches your mains voltage.
• Consult your dealer if you are ever in doubt about the installation, operation or safety of your
appliance.
• Do not remove any xed cover as this may expose dangerous voltages.
• Do not allow any electrical appliance to be exposed to dripping or splashing.
• To protect against electrical shock, do not immerse the mains cable, mains plug, or any part of
the appliance in water or other liquids.
• Make sure the dust bin is properly installed before use.
• Never vacuum up water or any other liquids. Never vacuum up ammable substances and do
not vacuum up ashes until they are cold.
• Never use the appliance without the motor protection lter. This damages the motor and
shortens the life of the appliance.
• If a blockage is found in the brushes, hoses or tubes, it should be removed before use. If the
unit is already switched on, turn it off, unplug the unit and remove the blockage before
re-use.
• Store and use the appliance well away from heat sources such as radiators or gas / electric
res.
• Do not run over the mains cable with the appliance.
• Close supervision is necessary when any appliance is used by or near children.
• This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge unless they have been
given supervision or instructions concerning the use of the appliance by a person responsible
for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Do not point the hose, tube or any other accessory at the eyes, ears or mouth during
operation.
• Unplug the appliance from the mains socket when it is not in use and before replacing lter.
• Unplug the unit from the mains socket before cleaning or maintenance.
• Washing lters maintains vacuum performance. They should be checked and cleaned
periodically (depending on the level of use). Make sureall lters are completely dry before
inserting back into the vacuum cleaner.
• Allow the appliance to cool completely before cleaning or storing.
• The motor is equipped with a thermal cut-cut. If for any reason the unit should overheat, the
thermostat will automatically turn the unit off. Should this occur, unplug the vacuum cleaner
from the electrical outlet and turn off the switch. Remove dirt container and empty. Clean
lters. Allow the unit to cool for approximately 1 hour. To re-start, plug into an electrical outlet
and switch back on.
• Do not use the appliance for other uses than its intended use.
• The use of accessories not recommended by the appliance manufacturer may cause injuries.
• Do not use the appliance outdoors.
• Do not operate an appliance with a damaged mains cable or mains plug, or in an abnormal
state. If the mains cable is damaged it must be replaced by the manufacturer, its service
agent, or similarly qualied persons in order to avoid a hazard.
• Do not continue to operate the appliance if you are in any doubt about it working normally
(e.g. abnormal noise, smell, smoke), or if it is damaged in any way - switch off, withdraw the
mains plug and consult your dealer.
• Any maintenance and repair must be handled by a professional technician. Do not try to
repair by yourself.
SPECIFICATIONS
Supply voltage: 220-240V~50Hz
Power input: 1200W (nominal), 1400W (Maxium)
Dust capacity: 2.5L
We continually strive to improve our products. Specications may change without prior notice.
CLEANING THE MOTOR PROTECTION FILTER
The motor protection lter should be cleaned twice a year, or when it appears to be visibly
clogged.
Always unplug the appliance from mains socket before replacing the lter.
1. Press the open cover button to open the cover (Fig 6).
2. Take out the motor protection lter.
3. Shake out the dust accumulated on the lter into a dustbin.
4. Replace the lter and close the cover. A click will be heard when the cover locks into place.
CLEANING THE EXHAUST FILTER
Always unplug the appliance from mains socket before replacing the lter.
1. Unclip the grill and take out the exhaust lter (Fig 11 & Fig 12).
2. Shake out the dust accumulated on the lter into a dustbin.
3. Replace the lter and the grill.
• Main Unit • Hose
(P.N.: CH830A-HS)
• Hard Floor Brush
(P.N.: CH830A-HF)
• Instruction Manual
(P.N.: CH830A- IM)
• Telescopic Tube
(P.N.: CH830A-TB)
• Combination Nozzle
(P.N.: CH830A-CN)
Bagless Cylin der
Vacu um Cleaner
Ins truc tion Man ua l
L14VR12
GB-2GB-1 GB-3
9
Handle
Rear wheels
Hose connection opening
Handgrip of hose
Hose connector
Hose
Telescopic tube
Cover
Motor Protection Filter
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
4
5 6
7
24 25
3
2
Bin lid
Bin handle
HEPA lter unit
Mesh guard
Base
Bin
On/Off button
Clip
Grill
17
10
9
13
11
12
8
Cord rewind button
Exhaust lter
Mains plug
Wheel
Combination nozzle
clip
Combination nozzle
Hard oor brush
PRODUCT OVERVIEW FIRST TIME USE
1. To connect the hose, insert the hose connector into the hose connection opening until you
hear a ‘click’ (Fig 1).
2. To connect the telescopic tube to the handgrip of the hose, insert the narrow section into the
wider section while turning a little (Fig 2).
3. Extend the telescopic tube to a length you nd the most comfortable by pressing the button
located on the telescopic tube (Fig 3).
4. Connect a nozzle/brush suitable for the oor type to be cleaned. The hard oor brush can be
used with the brush strips lowered or raised (Fig 4). You may also connect the combination
nozzle to vacuum corners, slots or grooves. It can also be used as a brush nozzle by turning
the strips out.
OPERATION
POWERING OFF AND STORAGE
1. Press the button on the top of the vacuum cleaner to turn it off and then remove the ON/OFF
mains plug from the mains socket.
2. Press the cord rewind button to rewind the retractable mains cable.
3. Put the vacuum cleaner in an upright position and attach the lower tube to the clip on the
vacuum cleaner (Fig 5).
EMPTYING THE BIN
Always unplug the vacuum cleaner from the mains socket before emptying the bin.
1. Remove the hose from the vacuum cleaner. Open the cover and lift out the bin (Fig 6 and Fig 7).
2. To prevent the dust dispersing, lower the bin into your dustbin.
3. Firmly grip the bin handle and, over a dustbin, push down on the black lever (inside the
handle) to release the bottom of the bin. The hinged bottom will swing open and allow
convenient emptying of the bin. Snap the bottom back into place. Take out the lter unit to
empty any residual dust and/or dirt.
4. If you nd the lter unit is blocked or dirty, follow the steps in “CLEANING THE HEPA FILTER
UNIT”. If not, skip this step.
5. Ret the lter unit back into the bin and then slot the unit back into the vacuum cleaner,
ensuring the handle slots back into its groove on the vacuum cleaner’s base.
6. Close the cover and reclip the lever clasps on.
CLEANING THE HEPA FILTER UNIT
1. To take out the lter unit from the bin, grip the black plastic lid rmly and pull (Fig 8).
2. Hold the bin lid and twist the base of the mesh guard anti-clockwise to unscrew the two
pieces (Fig 8).
3. Lift the HEPA lter from the mesh guard and gently shake out accumulated dust on the mesh
guard over your dustbin. You may rinse the lter gently under a running tap (Fig 9).
4. Shake out the dust accumulated on the HEPA lter. You may soak it in warm soapy water for a
few minutes, and then rinse it under a running tap to remove all traces of soap. Do not
reassemble the lter unit until it is completely dry.
5. To reassemble the lter unit, slot the the mesh guard back into the HEPA lter, with the rubber
rim facing upward (Fig 10).s
6. Fit the lter unit into the grooves on the underside of the bin lid, turn clockwise till it locks into
place.
7. Slot the entire unit back into the bin, making sure that the bin lid’s latches align with the
grooves on the bin.
1
3
4
5
6
7
8
9 10
11
12
2
1
15
14
16 19
20
22
21
18
23
1. Hold the mains plug and pull the retractable mains cable out of the vacuum cleaner. Connect
it to the mains socket. The YELLOW mark indicates the ideal length to extend the cable. Do not
extend the mains cable beyond the RED mark which indicates the maximum length.
2. Press the button on the top of the vacuum cleaner to turn it on.ON/OFF
3. To move the vacuum cleaner from room to room, you can unplug and carry it by either the
handle or the handgrip. Never use the mains cable to pull the vacuum cleaner.
The vacuum cleaner is a very powerful unit. Before plugging the cord into the electrical
outlet, make sure the switch is in the OFF position.
If the inlet, hose or telescopic tube is blocked, switch off the vacuum cleaner and
remove the blockage(s) before re-starting the vacuum cleaner.

Produktspezifikationen

Marke: Logik
Kategorie: Staubsauger
Modell: L14VR12

Brauchst du Hilfe?

Wenn Sie Hilfe mit Logik L14VR12 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Staubsauger Logik

Logik

Logik L14VUR12 Bedienungsanleitung

26 August 2024
Logik

Logik L16VB10 Bedienungsanleitung

26 August 2024
Logik

Logik L14VR12 Bedienungsanleitung

26 August 2024
Logik

Logik L16VRP12 Bedienungsanleitung

26 August 2024
Logik

Logik L16VB10E Bedienungsanleitung

26 August 2024
Logik

Logik L185VC15E Bedienungsanleitung

26 August 2024
Logik

Logik LVC1600BME Bedienungsanleitung

26 August 2024

Bedienungsanleitung Staubsauger

Neueste Bedienungsanleitung für -Kategorien-

Hoover

Hoover HC-420-HKA Bedienungsanleitung

16 Oktober 2024
LG

LG V-C5764HEU Bedienungsanleitung

16 Oktober 2024
LG

LG VC5016GHTY Bedienungsanleitung

15 Oktober 2024
AEG

AEG VX9-4-6PT Bedienungsanleitung

15 Oktober 2024
Zanussi

Zanussi ZAN3010EL Bedienungsanleitung

15 Oktober 2024
Coline

Coline VCB46A15F-70 Bedienungsanleitung

15 Oktober 2024
Miele

Miele S 183 Bedienungsanleitung

15 Oktober 2024
LG

LG VC33205NHTB Bedienungsanleitung

15 Oktober 2024
Meec Tools

Meec Tools 009-639 Bedienungsanleitung

15 Oktober 2024
Melissa

Melissa 16420214 Bedienungsanleitung

15 Oktober 2024