Livoo RV149 Bedienungsanleitung

Livoo Wecker RV149

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Livoo RV149 (4 Seiten) in der Kategorie Wecker. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
Instruction Manual
WWW.LIVOO.FR
Reference : RV149
Version : 1.4
Language : English
Digital clock
Instruction Manual
2
Thank you for buying our LIVOO product. We take great care in design, ergonomics and ease of use of our
products. We hope that this product will give you complete satisfaction.
This instruction manual is also available on our website
www.livoo.fr
SAFETY AND CARE PRECAUTIONS
BEFORE USING THE APPLIANCE FOR THE FIRST TIME, PLEASE READ CAREFULLY THESE INSTRUCTIONS AND
SAVE IT FOR ANY FURTHER NEED.
The digital clock is designed for indoor use only. Operating the digital clock outdoors, or in wet
areas may cause an electrical hazard and may damage the clock.
Do not throw, drop or hit the clock.
Clean with a soft, damp cloth. Keep away from dust, dirt and moisture.
MAIN FEATURES
LED time display
12 or 24 hour time format
Alarm clock & snooze function
Night mode setting
Function
Operation UP DOWN
MODE
Standard
Press
Brightness adjustment
(three levels) Turn on/off alarm clock
Switch the display: time,
alarm, night mode
Alarm on/off
Hold 12/24H time format / Enter the setting mode
Time
setting
Press
Forward 1 step Backward 1 step Confirm the setting
Hold Forward 8 step/second
Backward 8
step/second /
Alarm
setting
Press
Forward 1 step Backward 1 step Confirm the setting
Hold Forward 8 step/second
Backward 8
step/second /
Night
mode
setting
Press
Forward 1 step Backward 1 step Confirm the setting
Hold Forward 8 step/second
Backward 8
step/second /
Instruction Manual
3
INSTRUCTION OF USE
SETTING THE TIME
Press MODE button for 2 seconds to enter the time setting mode.
The hour digits start blinking and can be set by pressing UP or DOWN. Press MODE again to set the minute
digits by pressing UP or DOWN.
SETTING THE ALARM
Press MODE to display the alarm and press for 2 seconds to enter the alarm setting mode. The hour digits
start blinking and can be set by pressing UP or DOWN. Press MODE again to set the minute digits by
pressing UP or DOWN.
To activate the snooze function press MODE when the alarm is ringing. The ‘AL’ icon will flash until the next
alarm sets off.
To turn the alarm off press DOWN.
SNOOZE INTERVAL SETTING
The default snooze interval time is 5 minutes. To change the snooze interval enter the alarm setting mode
and press MODE 3 times. The ‘05’ digit starts blinking and you can set the interval time by pressing UP or
DOWN.
NIGHT MODE FUNCTION
Night mode function allows to automatically lower the brightness level during night time. The default night
mode is from 6PM to 6AM.
Press MODE 2 times to display “ON”. Press and hold MODE to enter night mode setting.
The hour digits start blinking and can be set by pressing UP or DOWN. Press MODE again to set the minute
digits. Press MODE to set the time when the night mode is over.
BRIGHTNESS LEVEL ADJUSTMENT
You can choose between three brightness levels. The default setting is medium level.
To adjust the brightness press UP.
POWER SUPPLY
1 x button cell (CR2032)
DC input 5V/500mA-1000mA
USB
Note that the button cell allows only to keep the time in memory in case there is no power supply. The
display and setting functions are not active under this condition.


Produktspezifikationen

Marke: Livoo
Kategorie: Wecker
Modell: RV149

Brauchst du Hilfe?

Wenn Sie Hilfe mit Livoo RV149 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten