Livarno Lux IAN 101253 Bedienungsanleitung

Livarno Lux Erleichterung IAN 101253

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Livarno Lux IAN 101253 (32 Seiten) in der Kategorie Erleichterung. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/32
Operator’s Manual
VIKING PAPR FGS 3250D
WELDING HELMET
Register your machine:
www.lincolnelectric.com/register
Authorized Service and Distributor Locator:
www.lincolnelectric.com/locator
IM10524 | Issue D ate Mar-21
© Lincoln Global, Inc. All Rights Reserved.
Save for future reference
Date Purchased
K#: (ex: K3930-1)
Serial: (ex: U1060512345)
POWERED AIR-PURIFYING RESPIRATOR (PAPR)
WITH FGS 3250D AUTO-DARKENING HELMET
WARNING: Users must read and understand the
user instructions prior to use. Use of this respirator
by untrained or unqualified people, or use that is not
in accordance with these user instructions, may
adversely affect respirator performance and may
be dangerous to your health. Keep this operator’s
manual for future reference.
CODE NUMBER:
12895
12894
FUMES AND GASES can be dangerous to your health
.
• Fumes from the normal use of welding
products contain significant quantities of
potentially hazardous compounds. See
consumable product label/insert.
• Keep your head out of fumes.
• Use enough ventilation or local exhaust to keep fumes and
gases from your breathing zone and general area.
• An approved respirator should be used unless exposure
assessments are below applicable exposure limits.
• When welding with electrodes which may require additional
ventilation such as stainless or hard facing (see instructions on
container or Safety Data Sheet (SDS) or on lead or cadmium
plated steel and other metals or coatings which produce highly
toxic fumes, keep exposure as low as possible and within
applicable OSHA PEL and ACGIH TLV limits using local exhaust
or mechanical ventilation. In confined spaces or in some
circumstances, outdoors, a respirator may be required.
Additional precautions are also required when welding on
galvanized steel.
NIOSH approval
IMPORTANT: THIS RESPIRATOR IS INTENDED TO BE USED BY
TRAINED INDIVIDUALS IN ACCORDANCE WITH
ALL THE PROVISIONS OF AN ORGANIZED
RESPIRATORY PROTECTION PROGRAM WHICH
COMPLIES WITH THE REQUIREMENTS OF THE
OSHA STANDARD 29 CFR 1910.134 AVAILABLE
FROM THE US DEPARTMENT OF LABOR,
OCCUPATIONAL SAFETY AND HEALTH ADMINIS-
TRATION OR IN CANADA CONFORMANCE WITH
CSA Z94.4.
The Viking PAPR 3350 is approved in the USA by NIOSH for use
in environments where:
• Particulate concentrations are known and characterized.
• Particulate concentrations are not I mmediately Dangerous to
Life or Health (IDLH).
• Atmospheres are NOT oxygen deficient.
• Contaminant concentrations do not exceed the Maximum Use
Concentration (MUC) determined using the Assigned Protection
Factor (APF) for specific respirator system or the APF
mandated by specific government standards, whichever is
lower.
The Viking PAPR 3350 respirator components and filtration
media must be used only in configurations listed on the NIOSH
approval label. Refer to NIOSH approval label for list of approved
components.
This respirator is not capable of or approved for use in an area
which includes hazardous levels of gases . It is only effective to
filter out particulate contaminants.
ARC Rays can injure eyes and burn skin
• Before welding, always inspect helmet and
filter lens to be sure they are fitted
properly, in good condition and not
damaged.
• Check to see that the clear lens is clean and securely attached
to the helmet.
• Always wear safety glasses with side shields or goggles under
the welding helmet and protective clothing to protect your
skin from radiation, burns and spatter.
• Ensure that optical radiation from other welder’s arcs in the
immediate area does not enter in from behind the helmet
and auto-darkening filter.
• Stop welding immediately if the auto-darkening lens does not
darken when arc is struck. See instruction manual
for troubleshooting information.
• Do not weld in the overhead position while using this
helmet.
Note: Auto-darkening filters in Lincoln helmets are designed to
protect the user against harmful ultra-violet and infrared
rays both in the dark and light states. No matter what
shade the filter is set to, the UV/IR protection is always
present.
2
SAFETY
SAFETY WARNINGS – READ BEFORE USING
Refer to for additional safety information.http: //www.lincolnelectric.com/safety
THANK YOU FOR SELECTING
A QUALITY PRODUCT BY
LINCOLN ELEC TRIC.
PLEASE EXAMINE CARTON AND EQUIPMENT FOR
DAMAGE IMMEDIATELY
When this equipment is shipped, title passes to the purchaser
upon receipt by the carrier. Consequently, claims for material
damaged in shipment must be made by the purchaser against the
transportation company at the time the shipment is received.
SAFETY DEPENDS ON YOU
Lincoln arc welding and cutting equipment is designed and built
with safety in mind. However, your overall safety can be increased
by proper installation ... and thoughtful operation on your part.
DO NOT INSTALL, OPERATE OR REPAIR THIS EQUIPMENT
WITHOUT READING THIS MANUAL AND THE SAFETY
PRECAUTIONS CONTAINED THROUGHOUT. And, most importantly,
think before you act and be careful.
This statement appears where the information must be followed
exactly to avoid serious personal injury or loss of life.
This statement appears where the information must be followed
to avoid minor personal injury or damage to this equipment.
KEEP YOUR HEAD OUT OF THE FUMES.
DON’T get too close to the arc.
Use corrective lenses if necessary
to stay a reasonable distance
away from the arc.
READ and obey the Safety Data
Sheet (SDS) and the warning label
that appears on all containers of
welding materials.
USE ENOUGH VENTILATION or
exhaust at the arc, or both, to
keep the fumes and gases from
your breathing zone and the general area.
IN A LARGE ROOM OR OUTDOORS, natural ventilation may be
adequate if you keep your head out of the fumes (See below).
USE NATURAL DRAFTS or fans to keep the fumes away
from your face.
If you de velop unusual symptoms, see your supervisor.
Perhaps the welding atmosphere and ventilation system
should be checked.
WEAR CORRECT EYE, EAR &
BODY PROTECTION
PROTECT your eyes and face with welding helmet
properly fitted and with proper grade of filter plate
(See ANSI Z49.1).
PROTECT your body from welding spatter and arc
flash with protective clothing including woolen
clothing, flame-proof apron and gloves, leather
leggings, and high boots.
PROTECT others from splatter, flash, and glare
with protective screens or barriers.
IN SOME AREAS, protection from noise may be appropriate.
BE SURE protective equipment is in good condition.
Also, wear safety glasses in work area
AT ALL TIMES.
SPECIAL SITUATIONS
DO NOT WELD OR CUT containers or materials which previously
had been in contact with hazardous substances unless they are
properly cleaned. This is extremely dangerous.
DO NOT WELD OR CUT painted or plated parts unless special
precautions with ventilation have been taken. They can release
highly toxic fumes or gases.
Additional precautionary measures
PROTECT compressed gas cylinders from excessive heat,
mechanical shocks, and arcs; fasten cylinders so they cannot fall.
BE SURE cylinders are never grounded or part of an
electrical circuit.
REMOVE all potential fire hazards from welding area.
ALWAYS HAVE FIRE FIGHTING EQUIPMENT READY FOR
IMMEDIATE USE AND KNOW HOW TO USE IT.
WARNING
CAUTION
Safety 01 of 04 - 5/16/2018

Produktspezifikationen

Marke: Livarno Lux
Kategorie: Erleichterung
Modell: IAN 101253

Brauchst du Hilfe?

Wenn Sie Hilfe mit Livarno Lux IAN 101253 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Erleichterung Livarno Lux

Livarno Lux

Livarno Lux IAN 91040 Bedienungsanleitung

21 August 2024
Livarno Lux

Livarno Lux IAN 63919 Bedienungsanleitung

18 August 2024
Livarno Lux

Livarno Lux IAN 279103 Bedienungsanleitung

18 August 2024
Livarno Lux

Livarno Lux IAN 274099 Bedienungsanleitung

18 August 2024
Livarno Lux

Livarno Lux IAN 101262 Bedienungsanleitung

18 August 2024
Livarno Lux

Livarno Lux IAN 113974 Bedienungsanleitung

17 August 2024
Livarno Lux

Livarno Lux IAN 75797 Bedienungsanleitung

17 August 2024
Livarno Lux

Livarno Lux IAN 279069 Bedienungsanleitung

16 August 2024
Livarno Lux

Livarno Lux IAN 285602 Bedienungsanleitung

16 August 2024
Livarno Lux

Livarno Lux IAN 279036 Bedienungsanleitung

16 August 2024

Bedienungsanleitung Erleichterung

Neueste Bedienungsanleitung für -Kategorien-

Goobay

Goobay 30780 Bedienungsanleitung

16 Oktober 2024
AFX

AFX Grace GRCP07CBBK Bedienungsanleitung

13 Oktober 2024
AFX

AFX Point PNTP0107L30D1BK Bedienungsanleitung

13 Oktober 2024
Smartwares

Smartwares 20.003.54 Bedienungsanleitung

9 Oktober 2024
Neewer

Neewer TL97C Bedienungsanleitung

8 Oktober 2024
Neewer

Neewer SRP18C Bedienungsanleitung

8 Oktober 2024
Qtx

Qtx Moonglow Bedienungsanleitung

7 Oktober 2024
Blumfeldt

Blumfeldt Shinecube XL Bedienungsanleitung

7 Oktober 2024
Qtx

Qtx HPWash100 Bedienungsanleitung

6 Oktober 2024
BeamZ

BeamZ DJ X5 Bedienungsanleitung

5 Oktober 2024