Lindy 20376 Bedienungsanleitung

Lindy Audio/Video-Konverter 20376

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Lindy 20376 (12 Seiten) in der Kategorie Audio/Video-Konverter. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/12

USB Digital to Analog Converter ue

User Manual English

Benutzerhandbuch Deutsch

Manuel Utilisateur Français

Manuale Italiano

LINDY No. 20376

www.lindy.com

User Manual English

Introduction

Thank you for purchasing the LINDY USB DAC (Digital- -Analog Audio Converter) with USB to ue

connectivity & head phone amplifier. The DAC converts digital PCM (Pulse Code Modulation) audio to

stereo audio signals and acts a USB digital audio interface allowing you to connect your analogue audio

system to a wide range of digital audio sources.

Features

 Provides audiophile sound quality up to 24bit/192kHz

 Accepts 2 channel digital audio and works with any PCM stream with Dolby Digital or DTS disabled

 Optical, Coaxial and USB Digital Audio interfaces

 Input selector switch and headphone volume control

 USB 2.0 interface compatible with Windows XP/Vista/7/8/10 and Mac OS X

 Can be powered via the USB bus or an additional USB power supply (not included)

Package Contents

 LINDY USB Digital to Analog Audio Converter ue

 USB Type A/B Cable, 1m

 This manual

Speciﬁcation

 Input ports: 1 x USB Type B, 1 x TOSLink (Optical Fibre), 1 x Coaxial

 Output ports: 2 x Phono Left & Right, 3.5mm Headphone Socket

 Integrated Digital to Analog Converter (DAC)

 USB Audio Interface

 Supports 2 channel LPCM

 -bit incoming bitstream on left and right channels 24

 Sampling Frequency (or Supported Sample Rates)

o Toslink/Coaxial SPDIF 44.1 192k –Hz

o USB 44.1 k –96 Hz

 Headphone Sound Output Power:

o 60mW @ RL=16Ohm THD <0.1%

o 30mW @ RL=32Ohm THD <0.1%

 Volume Control dial

User Manual English

Overview

1. Digital Input Switch

Select one of the three digital inputs, Optical,

Coaxial USB by setting the slide switch as or

follows:

Position Input Mode LED Colour

1 Optical Red

2 Coaxial Orange

3 USB Green

2. Optical Input

Connect a digital audio source device such as a

Bluray player, DVD player or set top box using a

Toslink cable to receive audio at up to 24bit/192kHz

3. Coaxial Input

Connect a digital audio source device such as a Bluray player, DVD player or set top box using a

Coaxial cable to receive audio at up to 24bit/192kHz

4. USB Port

Connect a desktop or laptop computer and use the DAC as an external sound card, playing high

definition audio directly from your computer via USB. Requires no additional drivers or software.

The USB port can also be used to connect a DC 5V power supply (not included)

5. Line Out

Connect an ampliﬁer or active speakers using

standard stereo phono cables to output sound

6. Headphone Socket

Connect your headphones

7. Volume Control Dial

Adjust the volume output of the DAC

Warning: Always start with the volume dial at the minimal

setting before connecting headphones. This will

help ensure you don t get unexpected high volume ’

levels that could damage your hearing

Installation

1. Power down the equipment that the DAC will be attached to

2. Connect the relevant input/output cables as described above

3. Set the Input switch to the desired selection

4. If the DAC is not connected to a computer connect it to a USB power supply (not included) that is

capable of providing 5V 500 1000mA –

5. Power up the source device and begin audio playback

Please Note: The USB DAC is not compatible with Dolby Digital or DTS formats, which are both forms

of compressed audio. If you play back CDs, DVDs or BDs encoded in Dolby Digital or DTS, you will only

hear some unwanted noise that may damage your speakers. To work around this you need to access

the menu setting of the source device and adjust Dolby Digital or DTS to PCM. This USB DAC works

with any PCM stream from CD players, DVD players and set-top boxes.

Produktspezifikationen

Marke:	Lindy
Kategorie:	Audio/Video-Konverter
Modell:	20376
Produktfarbe:	Schwarz
Digital Audio-Eingang (koaxial):	1
Kompatible Betriebssysteme:	Windows XP\r\nWindows Vista\r\nWindows 7\r\nWindows 8\r\nMac OS X
Digital-Audio-Optical-In:	1
Anzahl USB 1.1 Anschlüsse:	1