Lightware MX2-24x24-HDMI20-Audio-R Bedienungsanleitung

Lightware Schalter MX2-24x24-HDMI20-Audio-R

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Lightware MX2-24x24-HDMI20-Audio-R (84 Seiten) in der Kategorie Schalter. Dieser Bedienungsanleitung war für 45 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/84
MX2-8X8-HDMI20-AUDIO, -L
MX2-16x16-HDMI20, -R, -Audio, -Audio-R
MX2-24x24-HDMI20, -R, -Audio, -Audio-R
Users Manual
Multimedia Matrix Switcher
MX2-HDMI20 series – User's Manual 2
Important Safety Instructions
Class I Apparatus Construction.
This equipment must be used with a mains power system with a
protective earth connection. The third (earth) pin is a safety feature,
do not bypass or disable it. The equipment should be operated only
from the power source indicated on the product.
To disconnect the equipment safely from power, remove the power
cord from the rear of the equipment, or from the power source. The
MAINS plug is used as the disconnect device, the disconnect device
shall remain readily operable.
There are no user-serviceable parts inside of the unit. Removal of the
cover will expose dangerous voltages. To avoid personal injury, do not
remove the cover. Do not operate the unit without the cover installed.
The appliance must be safely connected to multimedia systems.
Follow instructions described in this manual.
Replacing the AC fuse
Unplug the AC power cord from the device. Locate the AC fuse on the
rear panel. Replace only the AC fuse as indicated on the rear panel.
Connect the power cord to the switcher and to the AC power source.
Make sure the switcher is working properly.
Ventilation
For the correct ventilation and to avoid overheating ensure enough
free space around the appliance. Do not cover the appliance, let the
ventilation holes free and never block or bypass the ventilators (if any).
WARNING
To prevent injury, the apparatus is recommended to securely attach to
the oor/wall or mount in accordance with the installation instructions.
The apparatus shall not be exposed to dripping or splashing and that
no objects lled with liquids, such as vases, shall be placed on the
apparatus. No naked ame sources, such as lighted candles, should
be placed on the apparatus.
CAUTION AVIS
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
Waste Electrical & Electronic Equipment
WEEE
This marking shown on the product or its literature,
indicates that it should not be disposed with other
household wastes at the end of its working life. To
prevent possible harm to the environment or human
health from uncontrolled waste disposal, please
separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material
resources. Household users should contact either the
retailer where they purchased this product, or their local government
ofce, for details of where and how they can take this item for
environmentally safe recycling. Business users should contact their
supplier and check the terms and conditions of the purchase contract.
This product should not be mixed with other commercial wastes for
disposal.
Common Safety Symbols
Symbol Description
Alternating current
Protective conductor terminal
Caution, possibility of eletric shock
Caution
MX2-HDMI20 series – User's Manual 3
Symbol Legend
The following symbols and markings are used in the document:
WARNING! Safety-related information which is highly recom-
mended to read and keep in every case!
ATTENTION! Useful information to perform a successful procedure;
it is recommended to read.
INFO: A notice which may contain additional information. Procedure
can be successful without reading it.
DEFINITION: The short description of a feature or a function.
TIPS AND TRICKS: Ideas which you may have not known yet but can
be useful.
Navigation Buttons
Go back to the previous page. If you clicked on a link previously,
you can go back to the source page by clicking the button.
Navigate to the Table of Contents.
Step back one page.
Step forward to the next page.
Document Information
All presented functions refer to the indicated products. The descriptions
have been made during testing these functions in accordance with the
indicated Hardware/Firmware/Software environment:
Item Version
Lightware Device Controller (LDC) software 1.26.0b6
Lightware Device Updater (LDU2) software 1.1.0
Controller rmware 1.3.2.b2
Document revision: 2.5
Release date: 28-11-2018
Editor: Judit Barsony
About Printing
Lightware Visual Engineering supports green technologies and
eco-friend mentality. Thus, this document is made for digital usage
primarily. If you need to print out few pages for any reason, follow the
recommended printing settings:
Page size: A4
Output size: Fit to page or Match page size
Orientation: Landscape
TIPS AND TRICKS: Thanks to the size of the original page, the
border around the content (grey on the second picture below)
makes possible to organize the pages better. After punching the
printed pages, they can be placed easily into a ring folder.
12 3

Produktspezifikationen

Marke: Lightware
Kategorie: Schalter
Modell: MX2-24x24-HDMI20-Audio-R
Display-Typ: LCD
Upgradefähige Firmware: Ja
Breite: 440.5 mm
Tiefe: 280.2 mm
Gewicht: 10090 g
Mitgelieferte Kabel: AC, LAN (RJ-45)
Produkttyp: AV-Matrix-Umschalter
Produktfarbe: Schwarz
Steuerung: Drehregler
Höhe: 177 mm
Material: Metall
AC Eingangsspannung: 100 - 240 V
AC Eingangsfrequenz: 50 - 60 Hz
Eingebautes Display: Ja
Betriebstemperatur: 0 - 50 °C
Relative Luftfeuchtigkeit in Betrieb: 10 - 90 %
Schnellstartübersicht: Ja
Zertifizierung: CE
Stromverbrauch (Standardbetrieb): 53 W
Anzahl Ethernet-LAN-Anschlüsse (RJ-45): 1
Stromverbrauch (max.): 108 W
Menge pro Packung: 1 Stück(e)
Gehäusematerial: Metall
HD-Typ: 4K Ultra HD
RS-232 port: 1
HDCP: Ja
Rack-Einbau: Ja
USB-Stecker: Mini-USB B
Netzteilfrequenz: 50/60 Hz
Anzahl der USB-Anschlüsse: 1
Maximale Auflösung: 4096 x 2160 Pixel
HDMI-Version: 2.0
Gehäusefarbe: Schwarz
Nachhaltigkeitszertifikate: RoHS
Anzahl der HDMI-Ausgänge: 24
Bandbreite: 18 Gbit/s
HDMI-In: 24
HDCP-Version: 2.2
Video Porttyp: HDMI
Anzahl HDMI-Ausgangsschnittstellen: 24
Rack-Kapazität: 4U
Anzahl HDMI-Eingangsschnittstellen: 24
RJ-45-Eingangsanschlüsse: 1
USB-Port-Typ: Mini USB Type-B
Erweiterte Display-Identifikationsdaten (EDID): Ja
Keine Videokompression: Ja
EDID-Management: Ja
Keine Signalverzögerung: Ja
Anschlüsse für analoge Audioeingänge: 8
Anschlüsse für analoge Audioausgänge: 8

Brauchst du Hilfe?

Wenn Sie Hilfe mit Lightware MX2-24x24-HDMI20-Audio-R benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Schalter Lightware

Bedienungsanleitung Schalter

Neueste Bedienungsanleitung für -Kategorien-