Liberty Garden 708 Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Liberty Garden 708 (6 Seiten) in der Kategorie Gartenschlauch. Dieser Bedienungsanleitung war für 21 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/6
Mod ive
Wall Mount Hose Reel
Owner’s Ma alnu
™
VISIT OUR WEBSITE: W . .COM WW LIBERTYGARDENPRODUCTS
OR CALL US TO FREE AT 1-866-820-5805, MONDAY - FRIDAY 9 A.M. - 5 P.M.LL
IMPORTANT READ THE OWNER’S MANUAL BEFORE ASSEMBLING :
1161 SOUTH PARK DRIVE, RNERSVILLE NC 4KE 2728
LIBERTY GARDEN PRODUCTS, INC.
TOOLS REQUIRED
PARTS LIST
Estimated Assembly time: 5 minutes (Not including mounting)
A. Crank handle (1) B. Allen screw (1)
D. Hose reel (1)
(Not pictured)
2
1. Align the holes in the crank handle with crank handle shaft. (A)
Tighten the crank handle allen screw using the Allen wrench (B)
provided. Do not over tighten crank handle screw. Figure 1
2. Attach the leader hose to the swivel connector.(C)
Figure 2
Note: If you have trouble with the swivel turning and kinking the leader
hose, try spraying a silicone spray inside to lubricate the O-rings. The
o-rings located inside the swivel may be dry. You can reach the O-rings
by taking off the retaining clip or spraying inside the opening of the
swivel.
3. Attach your garden hose to the hose connection on the hose
reel spool . (D) Figure 3
FIGURE 2
ASSEMBLY INSTRUCTIONS
Pliers, Adjustable Wrench, Drill (Not Included) & Allen Wrench (Included)
FIGURE 3
C. Leader hose (1)
FIGURE 1
B
B
A
D
D
D
AB
C
IMPORTANT: LAY OUT ALL PARTS AND FASTENERS. MAKE SURE ALL PARTS ARE ACCOUNTED FOR. IF ANY PART IS
MISSING PLEASE CONTACT LIBERTY GARDEN PRODUCTS AT
1-866-820-5805, MONDAY - FRIDAY 9 A.M. - 5 EST.
DO NOT CONTACT THE RETAILER.
YOU CAN ALSO VISIT OUR WEBSITE, WWW.LIBERTYGARDENPRODUCTS.COM,
FOR MORE INSTRUCTIONS PICTURES AND HELPFUL HINTS.
3
INSTALLATION
This hose reel MUST be mounted to a solid masonry wall or to wall studs
TIP: Remember to use the correct size and quantity of hardware to properly support the
total weight of the unit. A standard 100' length of garden hose weighs approximately 15 lbs.
Filled with water, the additional weight can exceed 20 lbs. The mounting hardware must be
able to support the combined weight of the unit, garden hose, plus water.
NOTE: The following hardware (not included)
is recommended for installation.
1. BRICK OR MASONRY ANCHOR SLEEVES:
(4) 7 or 8 mm x 60 mm masonry wall anchors
(5/16” x 2 1/2”)
(4) Anchor sleeves
(4) Washers
(4) Lock washers
(4) Nuts
NOTE: The following hardware (not included)
is recommended for installation.
WOOD SCREWS:
(4) 7 or 8 mm x 60 mm wood screws
(5/16” x 2 1/2”)
(4) Washers
Mounting Hole
Size: 5/16”
Mounting Hole
Size: 1/4”
Mounting Hole
Size: 1/4”
NOTE Drill hole :
diameters may vary based on
anchor sleeve, concrete screw and
wood screw manufacturer.
Check product recommendations
before drilling holes.
NOTE: The following hardware (not included)
is recommended for installation.
2. BRICK OR MASONARY SCREWS:
(4) 7 or 8 mm x 60 mm masonry screws
(5/16” x 2 1/2”)
(4) Washers
• Position and hold your hose reel against the brick masonry wall
at a convenient height. Mark the position of each suspension
hole on the wall. Remove the hose reel.
• Using a hammer drill l, drill holes 5/16” in diameter and
2 1/2” deep at the marked positions on the wall.
• Insert the masonry wall anchors into the anchor sleeve. Next,
insert the anchor and sleeve into the drilled holes until the steel
sleeve is completely in the wall.
• Place the hose reel on the masonry wall anchors.
• Install a washer, lock washer, and nut over each wall anchor
and tighten securely.
• Position and hold your hose reel against the brick masonry wall
at a convenient height. Mark the position of each suspension
hole on the wall. Remove the hose reel.
• Using a hammer drill, drill pilot holes 1/4” in diameter and 2 1/2”
deep at the marked positions on the wall.
• Align the hose reel suspension holes with the pilot holes.
• Attach the hose reel to the wall using the concrete screws with
washers and tighten securely.
• Using a stud finder locate the wood studs on your wall.
• Position and hold your hose reel against the wood wall at a convenient height.
Mark the position of each suspension hole on the wall. Remove the hose reel.
• Using an electric drill, drill pilot holes 1/4” in diameter and 2 1/2” deep at the marked
positions on the wall.
• Align the hose reel suspension holes with the pilot holes.
• Attach the hose reel to the wall using the wood screws with washers and tighten securely.
To learn more watch a video on our warranty and care section @ www.libertygardenproducts.com
Produktspezifikationen
| Marke: | Liberty Garden |
| Kategorie: | Gartenschlauch |
| Modell: | 708 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Liberty Garden 708 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Gartenschlauch Liberty Garden
16 August 2024
15 August 2024
15 August 2024
12 August 2024
3 Juni 2023
Bedienungsanleitung Gartenschlauch
- Gartenschlauch Brennenstuhl
- Gartenschlauch Vonroc
- Gartenschlauch Cocraft
- Gartenschlauch FERM
- Gartenschlauch Eurom
- Gartenschlauch Fuxtec
- Gartenschlauch Hazet
- Gartenschlauch Kärcher
- Gartenschlauch Silverline
- Gartenschlauch Florabest
- Gartenschlauch Toolcraft
- Gartenschlauch Gardena
- Gartenschlauch Hozelock
- Gartenschlauch Aqua Joe
- Gartenschlauch Waldbeck
- Gartenschlauch Strongway
- Gartenschlauch Sani-Lav
- Gartenschlauch Hoselink
- Gartenschlauch Coxreels
- Gartenschlauch Holman
- Gartenschlauch TOOLMATE
- Gartenschlauch Reelcraft
- Gartenschlauch Agrati
Neueste Bedienungsanleitung für -Kategorien-
8 Oktober 2024
6 September 2024
6 September 2024
4 September 2024
3 September 2024
2 September 2024
2 September 2024
1 September 2024
1 September 2024
1 September 2024