Lexmark X7170 Bedienungsanleitung

Lexmark Drucker X7170

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Lexmark X7170 (2 Seiten) in der Kategorie Drucker. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

Sold separately.

7100 Series All-In-One ?

Safety information

•Use only the power supply provided with this

product or the manufacturer’s authorized

replacement power supply.

•Connect the power cord to a properly grounded

electrical outlet that is near the product and easily

accessible.

•Refer service or repairs, other than those

described in the user documentation, to a

professional service person.

CAUTION: Do not use the fax feature during a

lightning storm. Do not set up this product or make

any electrical or cabling connections, such as the

power supply cord or telephone, during a lightning

storm.

For more help:

1See the User’s Guide.

2Visit our Web site: http://support.lexmark.com/.

3Call us at 1-800-332-4120.

Monday–Friday (9:00 AM–9:00 PM EST)

Saturday (Noon–6:00 PM EST)

*Phone number and support times may

change without notice.

Unpack your printer.

Load paper.

Raise the paper exit tray, and then

extend the paper guide.

1Load plain paper in the paper tray.

2Adjust the paper guides.

3Lower the paper exit tray, and then

extend the paper stop.

Prepare the All-In-One.

Make sure the power cord is pushed

all the way into the connector.

1Connect the telephone line.

See the User’s Guide before adding additional equipment.

Add a telephone. Add a telephone and answering machine.

Press Power.

3Press + to scroll, and then press Select to

enter your default language, and then your

default country or region.

4Press the keypad to enter the:

5Date using two digits for the month, day, and

year.

Time using the two digits for both hour and

minute.

Fax number.

Continue with Step 4...

*21H0070*

Press Select.

P/N 21H0070 E.C. 21H003

212

See the User’s Guide for a listing.

Install the print cartridges.

If you are using your All-In-One with a computer, continue with the following step. If you are using your All-In-One without a computer, you are finished.

Install the software.

Windows

Macintosh

Make sure your

computer is on.

1Connect the USB cable.

2Click Cancel on all New Hardware Screens.

Make sure your

computer is on.

1Connect the USB cable.

Click Install.

Open the scanner unit.

Remove the sticker and tape

from the print cartridges.

Insert the print cartridges.

Close the scanner unit.

Insert CD1.

If this install screen does not

appear, click Start Æ Run and

then type D:\setup, where D is

the letter of your CD-ROM drive.

Left Right

Important: After installation is

complete, remember to enable

your anti-virus software.

To prevent errors during installation:

1Close all open programs.

2Temporarily disable any anti-virus

software. For help, refer to your

program documentation, or

contact the software manufacturer

for support.