LevelOne GEP-2841 Bedienungsanleitung

LevelOne Schalter GEP-2841

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für LevelOne GEP-2841 (28 Seiten) in der Kategorie Schalter. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/28

Web Management Guide

( GEP- 2841 )

Chapter Product IntroductionⅠ

Product introduction

The LevelOne GEP-2841 Web Smart Gigabit PoE Switch, provides 24 PoE ports

10/100/1000Base-T plus 2 port Gigabit Uplink SFP and 2 port Gigabit Uplink RJ45 to

enable high speed network. With the plus the clearly visible status LEDs provide simple

monitoring of port link activity. Moreover, the SFP slots support pluggable modules that

enabling you to choose from a variety of transceivers. It offers powerful enhanced PoE

functionality and a total PoE budget of 375W. and it is fully complied with

IEEE802.3af/at/bt PoE standard at maximum 90W(1-2 port) power budget. supports up

to 30W output power per PoE port, giving you power distribution flexibility for a wide

range of PoE PD devices. It helps to save infrastructure wiring costs dramatically by

eliminating electric wiring and less UPS needed.

F ront interface

Figure 1-3

Definition of operating mode switch!

Mark

Work mode

Description

Unmanaged

mode

All ports communicate freely, and the parameters

configured in Web mode do not take effect

Web Smart

WEB managed

mode

The web network management function is

effective, and the switch can be managed and

configured

Indicator!

Figure 0-4

S/N

Indicator

Status

Description

①

P ower

Light on

Power on

Light off

No power

②

PoE

Light on

PoE power in

Light off

PoE without power

③

1000M

Light on

The current operating rate is 1000Mbps

Light off

The current operating rate is 10 /

100Mbps or the link is not connected

④

Link/Act

Light on

The link is connected

Light flash

The port has data transceiver

Light off

the link is not connected

List of accessories

l Master unit

l Power cord

l Quick Installation Guide

l L- shaped bracket and other

l Rubber Feet

Installation guide

For the safe installation and operation of the switch, it is recommended that you!

1. Check that the power cord is securely wrapped around the AC power connector"

2. Ensure proper heat dissipation and ventilation around the switch"

3. Do not stack heavy objects on the switch"

Mounting to rack

1. Check the grounding and stability of the frame"

2. L-Install the two shaped brackets in the accessories on both sides of the switch panel

and fix them with the screws provided in the accessories, as shown in Figure 2-1 "

3. Place the switch in the appropriate position in the rack and supported by the bracket"

Fix the L-shaped bracket on the guide grooves fixed at both ends of the rack with screws

to ensure that the switch is stably and horizontally installed on the machine, as shown in

Produktspezifikationen

Marke:	LevelOne
Kategorie:	Schalter
Modell:	GEP-2841
Upgradefähige Firmware:	Ja
Breite:	438 mm
Tiefe:	220 mm
Gewicht:	2340 g
Mitgelieferte Kabel:	AC
Produktfarbe:	Schwarz
Höhe:	45 mm
Energiequelle:	AC
AC Eingangsspannung:	100 - 240 V
AC Eingangsfrequenz:	50 - 60 Hz
Betriebstemperatur:	-10 - 65 °C
Relative Luftfeuchtigkeit in Betrieb:	5 - 90 %
Verpackungsbreite:	497 mm
Verpackungstiefe:	299 mm
Verpackungshöhe:	93 mm
Paketgewicht:	3000 g
Netzstandard:	IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Quality of Service (QoS) Support:	Ja
Schnellstartübersicht:	Ja
Zertifizierung:	CE, RoHS
Power over Ethernet (PoE):	Ja
Warentarifnummer (HS):	85176990
Ursprungsland:	China
Stromverbrauch (max.):	400 W
Verpackungsart:	Box
Ethernet LAN Datentransferraten:	10,100,1000 Mbit/s
LED-Anzeigen:	Ja
Temperaturbereich bei Lagerung:	-40 - 75 °C
Luftfeuchtigkeit bei Lagerung:	5 - 95 %
Switch-Typ:	Managed
Anzahl der basisschaltenden RJ-45 Ethernet Ports:	26
Basic Switching RJ-45 Ethernet Ports-Typ:	Gigabit Ethernet (10/100/1000)
Netzstecker:	AC-Eingangsbuchse
10G-Unterstützung:	Nein
Kupfer Ethernet Verkabelungstechnologie:	10BASE-T, 100BASE-TX, 1000BASE-T
MAC-Adressentabelle:	8000 Eintragungen
Routing-/Switching-Kapazität:	- Gbit/s
Jumbo Frames Unterstützung:	Ja
Rack-Einbau:	Ja
Formfaktor:	1U
Web-basiertes Management:	Ja
Anzahl Gigabit Ethernet (Kupfer) Anschlüsse:	24
VLAN-Unterstützung:	Ja
Speicherkapazität:	4.1 MB
Eingangsstrom:	4 A
Stapelbar:	Nein
Loop Protection:	Ja
Netzteil enthalten:	Ja
Jumbo-Frames:	9000
Switch-Ebene:	L2
Menge SFP-Modul-Steckplätze:	2
Gesamtleistung Power over Ethernet (PoE):	375 W
Rackmontageset:	Ja
Ventilatorlos:	Nein
Power over Ethernet (PoE) Leistung pro Anschluss:	15.4 W