Lenco SCD-1000 Bedienungsanleitung

Lenco Radio SCD-1000

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Lenco SCD-1000 (25 Seiten) in der Kategorie Radio. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/25
GB-0 GB-1
INSTRUCTION MANUAL
CD/MP3/CASSETTE PLAYER
WITH PLL FM RADIO &
USB & SD/MMC CARD READER
MODEL: SCD-1000
Please read and follow these instructions before using your unit.
For information and support, www.lenco.eu
OVERVIEW OF THE PLAYER
1. FOLDING HANDLE
2. CARD SLOT
3. SLEEP/HR/MIN BUTTON
4. USB PORT
5. CLOCK/MEM BUTTON
6. CASSETTE DOOR
7. CASSETTE PLAY BUTTON
8. CASSETTE REWIND BUTTON
9. CASSETTE FAST FORWARD BUTTON
10. CASSETTE STOP/EJECT BUTTON
11. CASSETTE PAUSE BUTTON
12. FM TELESCOPIC ANTENNA
13. TUNE -/PREVIOUS/FAST
BACKWARD BUTTON
14. CH +/FOLDER UP BUTTON
15. TUNE +/NEXT/FAST FORWARD
BUTTON
16. STOP BUTTON
17. VOL + BUTTON
18. PLAY/PAUSE & ST/MO BUTTON
19. STANDBY BUTTON
20. FUNCTION BUTTON
21. TONE/TIMER BUTTON
22. LCD DISPLAY
23. REMOTE SENSOR
24. CD DOOR OPEN/CLOSE AREA
25. CH -/FOLDER DOWN BUTTON
26. VOL - BUTTON
27. SPEAKERS
28. CD DOOR
29. BATTERY COMPARTMENT
30. PHONES JACK
31. AUX IN JACK
32. AC SOCKET
1 2 3 4 5 6 7 8
9
10
11
12
13
14
15
16
17
18
19 20 21 22 23 24 25 26
27 28 27
29 30 31 32
GB-2 GB-3
STANDBY
OK
SLEEP USBCARD
CD FM TAPE
A
UX IN
REP RAN ST/MO DISPLAY
TUNE TREBLE BASS VOL
MEM ID3 PROG
HR
TIMER CLOCK
MIN
MUTE
FOLDER
CH
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21 22
23
24
25
2
6
27 2
8
29
30
31 32
33 34
35
3
6
REMOTE CONTROL
1. SLEEP BUTTON
2. CARD BUTTON
3. CD BUTTON
4. FM BUTTON
5. REP BUTTON
6. RAN BUTTON
7. PREVIOUS/FAST BACKWARD BUTTON
8. NEXT/FAST FORWARD BUTTON
9. TUNE + BUTTON
10. TREBLE + BUTTON
11. TUNE - BUTTON
12. TREBLE - BUTTON
13. MEM BUTTON
14. ID3 BUTTON
15. CH + BUTTON
16. HR BUTTON
17. CH- BUTTON
18. TIMER BUTTON
19. STANDBY BUTTON
20. USB BUTTON
21. AUX IN BUTTON
22. TAPE BUTTON
23. DISPLAY BUTTON
24. ST/MO BUTTON
25. PLAY/PAUSE BUTTON
26. STOP BUTTON
27. VOL + BUTTON
28. BASS + BUTTON
29. VOL - BUTTON
30. BASS - BUTTON
31. FOLDER UP BUTTON
32. PROG BUTTON
33. FOLDER DOWN BUTTON
34. MIN BUTTON
35. MUTE BUTTON
36. CLOCK BUTTON
POWER SUPPLY
BATTERY OPERATION
1. Remove the battery compartment cover gently.
2. Install 8 x 'D' size batteries (UM-1 or equivalent) while observing the correct polarities.
3. Replace the battery compartment cover.
NOTE:
The AC cord must be detached from the AC socket of the player.
Leaking batteries may damage the battery cabinet and the player as a whole, so they should be
removed from the cabinet when becoming flat or when the player is not to be played on batteries for
some time.
AC OPERATION
Insert the AC cord to the AC socket of the player, and plug the other end to an applicable wall outlet.
NOTE: If the AC plug of this unit does not fit in with your AC outlet, a plug adaptor should be used.
Consult your local dealer on the type of plug adaptor.
NOTE: During playback, if not any operation in about 4 hours, the unit will switch to standby mode
automatically.
BACKUP POWER FOR CLOCK
Two AA/R6 size batteries are required for the backup power for the clock. Follow the instructions of
"BATTERY OPERATION" to install the batteries.
STEREO HEADPHONES JACK
A stereo headphones jack has been provided at the back of the unit so that you can enjoy music without
disturbing others. To use this jack, plug in the headphones/earphones (3.5mm in diameter, not included)
and adjust the volume to a comfortable level.
NOTE: When external headphones/earphones are connected, the sound to the unit's main speakers
will be made mute.
AUX IN
Follow below steps to connect the unit to another audio device like MP3 player and the like:
1. Connect the Phones jack of the MP3 player or Audio Out jack of other audio device to AUX IN jack
with audio cable.
2. Press STANDBY button to turn the unit on.
3. Press FUNCTION button on the unit repeatedly or press AUX IN button on the remote to switch the
unit to AUX mode.
4. Power on the device and begin playback.
To PHONES jack
GB-4 GB-5
MUTE THE UNIT
During playback, press MUTE button to switch off the audio. Press the button again to resume the
audio.
TREBLE/BASS EFFECT ADJUSTING
During playback, press the TONE button on the unit repeatedly and adjust the effect of treble or bass
via pressing VOL+/- button on the unit continuously. The effect of the treble and bass also could be
adjusted by pressing TREBLE+/- button or BASS+/- button directly.
VOLUME LEVEL
During playback, press VOL+/- button to adjust the volume level accordingly.
CHECK THE CURRENT TIME
At TAPE, AUX and FM radio modes, Press DISPLAY button on the remote to check the current time.
SLEEP FUNCTION
Press SLEEP button at power on mode. Each time SLEEP button is pressed, the sleep time changes on
the display. When your desired sleep time shows on the screen, release the SLEEP button. When the
sleep time is expired, the unit will switch off automatically.
CLOCK SETTING
1. At standby mode, press CLOCK button and use HR/MIN/SLEEP button on the unit or press HR
button on the remote to switch between the time modes (12 hours and 24 hours) accordingly. Then
press CLOCK Button to confirm your selection.
2. The hour flashes on the screen. Press HR/MIN/SLEEP button on the unit repeatedly to set the hour
and press CLOCK Button to confirm.
3. The minute flashes on the screen. Set the minute by using HR/MIN/SLEEP button on the unit
repeatedly, confirm your setting by pressing CLOCK Button.
Note: When the hour flashes on the screen, the clock also could be set by pressing HR button and MIN
button on the remote directly. After setting, press CLOCK button to confirm.
TIMER SETTING
1. At standby mode, press TIMER button on the unit or on the remote.
2. The hour flashes on the screen with "T". Adjust the hour by using HR/MIN/SLEEP button on the unit
continuously and press TIMER Button to confirm.
3. The minute flashes on the screen. Set the minute by using HR/MIN/SLEEP button on the unit
continuously. Confirm your setting by pressing TIMER Button. The timer “ON” shows on the screen to
indicate the timer is activated (Press TIMER button again to disable the timer)
Note: When the hour flashes, the time also could be set by pressing HR button and MIN button on the
remote directly. After setting, press TIMER button to confirm
4. Press FUNCTION button on the unit repeatedly or use CD, FM, USB and card buttons on the remote
to set the timer modes among disc, radio, USB and card modes. The unit will be turned on at your
selected mode at the time you set for the timer.
FM RADIO
TUNING THE FM RADIO
1. Press STANDBY button to turn the unit on.
2. Press FUNCTION button on the unit repeatedly or press FM button on the remote to switch the unit to
TUNER(radio) mode.
3. Press TUNE+/- button to fine tune the radio station. Press and hold TUNE+/- button to automatically
tune the radio frequency forward and backward respectively. When an available station is found, the
unit will broadcast it immediately.
4. Press ST/MO button on the remote to switch the radio between FM(MONO) and FM(STEREO).
SAVING FM RADIO STATIONS TO THE UNIT'S MEMORY
1. After tuning the FM radio to the desired stations, press MEM button, a number of a memory cell
flashes on the screen.
2. Press CH+/ CH- button to select the radio memory cell.
3. Press MEM button again to save the current radio station to the selected memory cell.
4. To recall the preset station frequency, press CH+ or CH- button repeatedly.
HANDLING AND MAINTENANCE OF A DISC
Follow the instructions below to handle and maintain your disc in order
that long time and trouble free performance can possibly be obtained:
Ensure not to caress the rain bow side of the disc; handle the disc by
the edge.
Long time exposure to sunshine, high temperatures and humidity will
damage the disc. And keep storage area clean.
Avoid sticking labels on both sides of a disc. Writing with pointed
articles on the disc should be strictly avoided.
Clean the disc wiping the centre and then working out to the edge with
a dry & soft cloth or a disc brush. Avoid any cleansing lotion or
chemical eradicator.
Store them in their cases when they are not to be used.
LOAD A DISC
1. Open the CD door by pressing CD Door Open/Clear area.
2. Load a disc on the disc tray with the label side facing up.
3. Close the CD door.
PLAY A DISC
1. Press the FUNCTION button on the unit repeatedly or press CD button on the remote to switch the
unit to CD mode. "READING" shows on the screen to indicate at CD mode.
2. Follow the instructions above to load a disc.
3. When the disc is read successfully, total number of tracks and the total playtime shows in the LCD
and playback starts from the first track.
4. Press Play/Pause button once to halt music playback, the elapsed time of the current track flashes to
indicate the player in Pause mode; press Stop button to cease music playback, the LCD shows the
total number of the tracks and the total playtime.
5. During playback, press DISPLAY button repeatedly to check the play information of the disc (the
remain of the current track, the elapsed time of the disc and the remain of the disc).
HANDLE DISC ONLY AS SHOWN
CLEAN FROM CENTER TO EDGE
DO NOT STORE NEAR HEAT
To AUX IN jack To PHONES jack on MP3 player /
A
UDIO OUT jack on audio device


Produktspezifikationen

Marke: Lenco
Kategorie: Radio
Modell: SCD-1000

Brauchst du Hilfe?

Wenn Sie Hilfe mit Lenco SCD-1000 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Radio Lenco

Bedienungsanleitung Radio

Neueste Bedienungsanleitung für -Kategorien-