Lanberg ICS-0808-0020 Bedienungsanleitung

Lanberg Überwachungskamera ICS-0808-0020

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Lanberg ICS-0808-0020 (3 Seiten) in der Kategorie Überwachungskamera. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/3
QUICK INSTALLATION GUIDE
WIRELESS KIT
Statement
Installation Instruction Of WIFI NVR KIT Record video Video Backup
Video Playback
Setup The System
Safety Caution
Out Of Box Audit
NVR
HDD Install
IPC
Thank you for purchasing our product! This quick user guide will talk about main usages of
the product. More information can be found on our website and the help www.lanberg.eu
center. This user guide may contain inaccurate content due to hardware and software
upgrade. It is subject to change without previous notice.
Note:
Wireless NVR can’t be connected to WIFI router wirelessly at present. They can be only
connected by network cable.
This system is standalone with embedded Linux Operating System in the NVR. Just like a
desktop PC, need to hook a screen to the NVR to enter the OS. Any TV , monitor with VGA
or HDMI input should work for it.
1 Install antennas for cameras and the NVR;.
2.Connect a screen to the NVR via its HDMI or VGA port(HDMI and VGA cable
not included);
3. Plug the NVR to power(use bigger 12V 2A power adapter);
4. Plug cameras to power(use smaller 12V 1A power adapters);
5. Within seconds, you should see camera’s images on the screen;
6.Plug the mouse(included) to an USB port on back of NVR. You shall then be able to operate
on the system.
In the OS you can find fullest functionalities including live view, record, playback, video
backup and all settings.
Default ID: admin
Password: none (means leaving the password empty, just click login)
Tips：To protect your privacy, please set your password at earliest convenience. Right click
the mouse Go to System Setup System Admin User Management to set password.→ → →
Record video is very easy on camera system.
1.Time Recording: Setup period of time of recording on NVR GUI .Right click mouse→
System Setup Record setup Record Plan.Click “time”and put mouse icon on the upper → →
left corner(for example“1”as picture shows),press and drag the mouse to the right to choose
the time.The list will turn to red.
2.Motion Recording: Only detect motion and then start recording.Right click mouse→
System Setup Record setup Record Plan.Click“motion”and put mouse icon on the upper → →
left corner(for example“1”as picture shows),press and drag the mouse to the right to choose
the time. The list will turn to green.
3. → Alarm recording: Right click mouse System Setup→Record setup→Record Plan.Click
“Alarm”and put mouse icon on the upper left corner(for example “1”as picture shows),press
and drag the mouse to the right to choose the time. The list will turn to yellow.
Note: Users can setup any period of time they want,for example 0:00:00 - 23:59:59,That’s
24 hours *7 days recording.When NVR detects hard disk,the default setting will be 24
hours*7 days recording.
Use U disk to copy video,so easy and convenient!
1.2 USB ports: Plug U flash disk into
the USB port of NVR. Right click
on main menu Video backup→ →
choose backup channel→choose
video mode setup searching →
time search→ →choose recording
file on the list→video backup
(support 32G U flash disk at max.
Recording file is packed one hour
per time.)
Steps:right clik mouse in main menu Video playback choose date,channel,record mode→ →
→ →click search then can view playback file.
1. IIIustration for playback button: play, pause: fast forward*2,*4,*8；
2. Play file: Choose the recording file in file list,as number“1”shown in picture. Choose one
of the recording, click “play”to play to recording file;
3. Video backup: Choose the recording file in file list,as number“1”shown in picture.insert
the U flash disk, click “video backup”to backup the file;
4. Timeline: Click “date”and “time”at left bottom to check the timeline of recording, as
number“2”shown in picture;
5. On the timeline with recording file,left click the mouse, the can playback the file.
Tips: the system may not include hard disk depending on the kit you selected. the NVR works
most 3.5" SATA HDD or 2.5"SATA HDD
1.Unplug your NVR from power,unscrew and remove the top cover.
2.Connect the SATA power and data cables from the NVR to the
corresponding ports on your HDD (as shown).
lding the hard drive and the DVR ,gently turn it over and line up
e holes on the hard drive with the holes on the NVR. using a
illips screwdriver,screw the provided screws into the holes and
semble the cover.
ote: New HDD have to be formatted before recording.
o get better WIFI signal, it had better place the NVR in open
ea and high position.
1. Please do not put any fluid container on the product.
2. Please use the product in ventilated environment and prevent blocking the vents.
3. Please use included power supply with the product to prevent damage to the product.
4. Please use the product under its standard working temperature and humidity.(advised
in this manual or distributor’s website)
5. Dust on PCB may cause short circuit.It is suggested to clean the dust on PCB timely
to make the product work properly.
6. Please obey the regulation and policy in your country and area during the installation
of this.
After receiving the product, please check all products and accessories with information
below. If any is missed or damaged, please contact the distributor.
1 Double antennas to WIFI range.WIFI Antenna Ports:
2. WAN Port: Connect your NVR to Internet
3 VGA Port:. For viewing on VGA monitor
4 HDMI Port: . For viewing on HDTV
5 USB Ports: . For mouse and backup
6 Power Input.
1. WiFi connection with NVRWIFI antenna: ；
2 input power 12V 1A;. DC Port:
3. Reset button: press reset button for 10 seconds to restore factory setting
and enter into matching-code mode.
ITEM:
WIFI NVR
Screw bag(4 screws for HDD)
DC 12V 2A power supply (for NVR)
User manual
WIFI IP Camera*
DC 12V 1A power supply(for IPC)*
Screw bag (for IPC）*
Antenna Extension Cord*
QUANTITY:
1pcs
1pcs
1pcs
1pcs
4/8pcs
4/8pcs
4/8pcs
1/2(4CH/8CH)pcs
View On PC Via IE (Internet Explorer)
1. When your PC is in same LAN with the NVR （normally means they are connected to the
same router）
Step1.Find the IP address and port# of your NVR(IP address can be found in System
Setup Network Setup).→
2.OPTIONAL -When your computer/laptop is out of home/local network (eg. You want to
have a preview from the office). Access from the CLOUD ID to the device
Step 1. Open your browser and enter the website address in the search engine:
www.noip.com - the website owner provides free DDNS services.
Step 2. Required account creation.
Enter: Hostname - the name you chose (eg Michał123) Choose a domain from the
drop-down list (eg DDNS.net Click on "Sign UP" to create an account.) After completing
the data, please confirm your email to activate your account. step by step just like a service
provider leads you.
Step 3. NVR settings - Please enter
System Options→Network →DDNS
Director choose "NO-IP"→URL
enter the hostname (eg Michał123)
and the selected member from the
drop-down list (eg ddns.net)→User
enter the email given during
registration→Password enter the
password provided during
registration. Click the TEST button.
If the data is entered correctly, the
tests will pass
Step 4. In the browser, enter, for
example, michal123.ddns.net and
then we will open a page identical to
the one in the local network. You
must log in with administrator data
from the NVR (login and password).
Step 2. Enter the NVR’s IP address
in your IE browser for example:
http://192.1.1.7(If the default WEB
port 80 has been changed e.g. to
100,you’ll need to add new port
number when input IP address in
the browser, for example:
http://192.168.1.7:100).
NOTE: For proper configuration, you
should have public IP and port
forwarding (available manual also at
www.noip.com right after
registration). View On Mobile
* quantities given in order for a 4-channel, followed by an 8-channel set (4ch/8ch).
QUICK INSTALLATION GUIDE
View On Mobile MENU-Do What Extend WIFI Range
Delete Repeater
Repeater Setup
Wireless Match-code Operation Procedure
Playback On Mobiles
1 Download the APP “IP PRO”.
Users can use cellphone to scan the QR code below to install the APP free of charge,or
users can search “IP Pro 3.0”on APP store or Google Play then install the APP . Click right button you can enter the main menu; click right button again you can exit the
current menu or return.
Wireless connection is easy and convenient, but it’s not universal application. Because of
the character of WIFI, the WIFI signal will decrease when going through some obstacles.
Some methods can be applied to bypass obstacles and extend WIFI range.
Move the mouse to targeted channels, left click to delete, and then click “Apply” and “OK”.
Application Example
Warning
As picture shown above, when IPCAM1 is put somewhere is out of NVR WIFI range, and
there is IPCAM2 between them with strong WIFI signal, users can put IPCAM1 close to NVR
and power it, setup IPCAM1 repeated by IPCAM2, and then install IPCAM1 to the
presupposed place.
WIFI range is like an apple and the antenna of NVR is in the center of it. WIFI signal is strong
all around the WIFI range. Antenna of NVR should be put straight up, if not, WIFI signal will
be weak. According to the signal transmission character of antenna, the antenna of cameras
should overlap or parallel to NVR WIFI range, as pictures showed below:
Split screen: change status of live view. You can choose
to view multiple cameras or any single camera.
Video Manage: manage IP cameras and NVR channels.
System setup: all system settings.
Video playback: playback recorded videos.
Video backup: backup recorded videos.
Color adjust: adjust the image setting of each camera.
Manual record: shortcut to change the record settings.
Volume: Adjust volume of audio cameras(works only for
audio cameras).
Setup Wizard: step by step guide of 1st time general
settings.
Fast Network: shortcut to network settings.
Wifi add: add IP cameras into NVR channels wirelessly.
Adjust channel: adjust the order of the NVR channels.
Exit System: logout, reboot, close screen output and shut
down the system.
• General setup
Language
Time
Display resolution
HDD informaion
• Record setup
Record plan for each channel
video detectionr
• Channel setup
Manage channels and
cameras
• Network setup
All network related
settings
• System admin
System version
System maintenance including system upgrade
User and password management
Restore to default settings
System log
Menu bar
1. Position The Antenna Correctly
Installation method of antenna
extension cord
Notes: When WIFI signal is not strong enough against walls, users can take off the original
antenna and subtitute antenna extension cord. Drill a hole on the wall to let the extension
cord go through and simply it where WIFI signal is strong.
2.Use Antenna Extension Cord to prolong WIFI distance
Note:
1. Repeater function can’t strengthen WIFI signal for wireless NVR kit, but can extend the
distance by repeaters -- WIFI cameras.
2. Only when the repeater cameras and repeated cameras are positioned correctly, WIFI
distance will be extended.
3. Repeater function and 3 meters antenna extension cord are two methods to extend WIFI
range. Users can choose one according to real situation.
3.Set up cascading connection in a reasonable solution, extend
wifi signal transfer distance
Click right button Choose System setup; you then shall enter the menu that enables you →
to do all settings related to this system.
Step 1: Start NVR and IPC.Right click mouse match-code interface.→ →Wifi add
Step 2: Press reset button on camera for 10 seconds and get match-code mode.
Step 3: Click “Exit”after adding.Matching code completes.
Note: Default valid time to match code is within 10 minutes after IPC starts.if overtime,
match code function will shut off.users have to press reset button on camera for 10
seconds and get match-code mode again.
Step 1: Right click on NVR’S GUI, left click “video management” then left click repeater”→
Step 2: Add repeater
As picture shown below, click icon + besides channel 3, choose other channel.
Step 3: As picture shown below, it means IPC1 is connected to NVR through IPC2 and
IPC3. IPC2 is connected to NVR through IPC3. IPC3 is connected to NVR directly.
Step 4: Click “Apply” and then click “refresh” to check if the setting is successful.
System Setup
Run the APP “IP PRO”, login with your account or choose Trial Click“+”to “Add device by →
ID”→find it the NVR’s Network setup, or right bottom corner on screen),Description(e.g.
Home Camera), User name (default user name is “admin”)and password(default is empty)→
Submit to get back to your device list Click the device to view the cameras.→
In the IP PRO APP，while viewing live video of the system, click Playback, you will enter the
remote playback menu. The APP automatically playback camera 1, you can switch channels
the CH.
Tips: Videos in playback are HD@real time which requires very good transmission condition.
We suggest to playback in LAN. Remote playback out of LAN may not 100% work due to
connection & network condition.
Note: For IOS system,it requires IOS 8.0 version or above.For android, android 4.4 or above.
Tips: if you’ve set a password on your NVR system, please update your password on APP
to view.
CORRECT METHOD FAULT METHOD
ANTENNA EXTENSION CORD
IP CAMERA
WINDOW
WALL
NVR
IPCAM1IPCAM2NVR
2 Add the NVR system to your APP device list .
In order to reset the password on the recorder, enter a random string of characters into the
designated login field and confirm it to trigger the appearance of the error message. Then
alternately press the buttons of the connected mouse to the recorder 6 times, starting from the
left and ending with the right one (left, right, left right etc.). After doing this, you will see a message
about restoring default users - press "Yes". Then a window will appear with the option of setting
a new password - in this case, you do not need to provide the old one.
Notes:
Producer: Impakt S.A. ul. Stanisława Lema 16; 62-050 Mosina - Poland
Declaration of Conformity CE - www.lanberg.eu
Country of origin: Chiny / China
Warranty: 24 months.
General warranty terms available at: www.impakt.com.pl/service.html
Notes: In case you notice a decrease in the quality of neighboring wireless connections (eg. Wi-Fi
router) on the 2.4 GHz band, check if your device transmits signals on the same channel as the
camera recorder - channel 1. If so, try changing the broadcasting channel Your device (eg. in the
router) to another usable channel - 11 or 6 (assuming the router's Wi-Fi operation at 20 MHz
bandwidth).

Produktspezifikationen

Marke: Lanberg
Kategorie: Überwachungskamera
Modell: ICS-0808-0020

Brauchst du Hilfe?

Wenn Sie Hilfe mit Lanberg ICS-0808-0020 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Überwachungskamera Lanberg

Lanberg

Lanberg ICS-0808-0020 Bedienungsanleitung

5 August 2024

Bedienungsanleitung Überwachungskamera

Neueste Bedienungsanleitung für -Kategorien-

Trebs

Trebs CCD-401C Bedienungsanleitung

15 Oktober 2024
D-Link

D-Link DCS-7510 Bedienungsanleitung

15 Oktober 2024
Foscam

Foscam FI9900EP Bedienungsanleitung

14 Oktober 2024
Alecto

Alecto DVC-215IP Bedienungsanleitung

14 Oktober 2024
Hikvision

Hikvision DS-2CD2326G2-IU Bedienungsanleitung

13 Oktober 2024
Hikvision

Hikvision DS-2TD2166-15/V1 Bedienungsanleitung

13 Oktober 2024
Hikvision

Hikvision DS-2DE7A245IX-AE/S1 Bedienungsanleitung

13 Oktober 2024
Hikvision

Hikvision DS-2CD7A26G0-IZ(H)SY Bedienungsanleitung

11 Oktober 2024
Hikvision

Hikvision DS-2CE79DF8T-AZE Bedienungsanleitung

11 Oktober 2024
Hikvision

Hikvision DS-2XM6726G0-I(D)(S)(M)(/ND) Bedienungsanleitung

11 Oktober 2024