Lanaform IRT-100 Bedienungsanleitung

Lanaform Thermometer IRT-100

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Lanaform IRT-100 (80 Seiten) in der Kategorie Thermometer. Dieser Bedienungsanleitung war für 30 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/80

HE ALTH

IRT-100

INFRARED

THERMOMETER

Fever

Alert

32- Slot

Memory

Infrared

Technology

1” Instant

measurement

E-IM-IRT-100-LA090115-002

September 10, 2020 12:35 pm

ENGLISH

ENGLISHENGLISH

INTENDED USE · IRT-100

Thank you for purchasing our Infrared Thermometer, type

AET-R1D1. This Infrared Thermometer is a non-sterile,

reusable, handheld device. It can be used by consumers in

homecare environment and doctors in clinic as reference.

It is intended for measuring human body temperat ure of

three months and above of people by detecting infrared

heat from the center of the forehead.

The clinical thermometer is an adjust ed mode clinical

thermometer.

· The patient can use and maintenance the device as an

operator.

· For safe and proper use of this product, be sure t o read

and fully understand Safety Precaut ions contained in

this user manual.

· Keep this manual wit h you for a convenient reference.

· Keep this manual in a proper way and avoid any loss.

If you need other information, please cont act the

manufactu rer.

The correct measurement

method to follow:

Measure the forehead. Distance 15mm to 50mm.

CORRECT MEASUREMENT METHOD

1 Turn t he thermometer on by pressing the

“SCAN” but ton. A beep sound will be heard

following which the screen will with ---°C

indicating the unit is ready for use.

2 Place the thermometer probe point near the

forehead and press “SCAN” and release after ~

1 second and the thermometer will beep and

display the accurate temperature. Whenever

consecutive readings are required, please wait

for at least 5 second. The above procedur e can

be repeated as many times as required.

3 To turn o the device press and hold the “SCAN”

switch for ~ 5 seconds. Or the thermometer will

turn o automatically after ~ 60 seconds.

UNIT DESCRIPTION

Display information

Location indication: The icon indication the correct mea-

suring position when measuring.

Temperature data indication: The temperature reading is

displayed after measuring.

Temperature unit indication: Unit of measuring temperature

shows °C or °F.

Low battery symbol indication: the icon prompts you to

replace the battery when the power is low.

Memory symbol indication: it shows in memory query

mode currently.

LOAD AND REPLACE BATTERIES

Batt eries need replace when the icon “ ” is display on

the screen. The steps as follow:

1 Press and hold the bat tery cover, and push it

upward diagonally to push the cover away.

2 Install 2*AAA batteries as shown in

the positive and negative pole.

3 Close the battery cover.

Warning:

Please t ake out the batter y if you do not use the thermo-

meter for a long time.

· Please refer to the relevant laws and regulations for the

disposal of waste batteries.

· Do not mix old and new batteries;

· -Do not mix alkaline, st andard (carbon-zinc), or rechar

geable (Ni-Cd, Ni- MH, etc.) batteries.

BEFORE TAKE A MEASUREMENT

1 It is suggested to try the device by yourself

rst , so as t o know how to use it.

2 In order to avoid aecting accuracy of the device

due to the external too cold or too hot environment,

it must be placed in general environment of room

temperature of 16°C -35°C for at least 30 minutes

before use to avoid incorrect measurement results.

3 The person measured should be kept at

room temperature for at least 20 minutes

to make body temperature balanced.

4 After strenuous exercise, you should rest for at

least 30 minutes before taking measurement.

5 Wipe the skin dry and push aside hair

strands before commencing.

6 When repeated measurements are made

continuously, move away the probe bet ween

each measurement and rest for at least 5s before

making the next to obtain the most correct result.

7 The normal reading value is about 35.5°C ~ 37.8°C.

The user should take more temperat ure to

know his or her own health temperature.

Pay at tention to physical changes or consult

your doctor if there is any abnormality.

8 Check t he probe is clean before each

measurement to ensure accuracy.

INSTRUCTIONS FOR USE

1 Press the “SCAN” key. The display is activated

to show all segments for 1 second.

2 The last measurement reading will automatically be

shown on the display for 1 second wit h the “M” icon.

3 When the “---°C“ display, a beep sound is heard

and the thermometer is ready for measurement.

4 Aim the thermometer at the center of the

forehead with a dist ance of 15mm to 50 mm.

5 Press the “SCAN” key, after 1 second a long beep will

verify the completion of measurement .

If a reading below 32°C is recorded a “Lo” sign will

be displayed followed by 2 consecutive beeps.

If a reading above 37.8°C is recorded there will be 6

consecutive beeps.

If a reading above 42.2°C is recorded a “Hi” sign will

be displayed followed by 2 consecutive beeps.

6 Press the “SCAN” key for 5 seconds to turn

o the thermometer. Or the unit will switch

o automat ically after 60 seconds.

Recalling Readings from Memory

In shutdown mode, long press the “SCAN” key for 4s unt il

the screen is display “M”, then release and the screen

display ”01 => 36.8°C”, and then press the “SCAN” key

to display the next reading in a sequence from the last

reading to the rst reading.

The thermometer has the memory to recall the last 32 readings.

Produktspezifikationen

Marke:	Lanaform
Kategorie:	Thermometer
Modell:	IRT-100
Akku-/Batterietyp:	AAA
Akku-/Batterietechnologie:	Alkali
Verpackungsbreite:	54 mm
Verpackungstiefe:	54 mm
Verpackungshöhe:	165 mm
Paketgewicht:	100 g
Display:	LED
Typ:	Fernabtastthermometer
Automatische Abschaltung:	Ja
Verpackungsart:	Box
Anzahl unterstützter Akkus/Batterien:	2
Akku-/Batteriespannung:	1.5 V
Speicherkapazität:	32 Eintragungen
Akkus/Batterien enthalten:	Ja
Speicherfunktion:	Ja
Maßeinheit:	°C, °F
Position des Thermometers:	Stirn
Messzeit:	1 s
Hochtemperatur-Alarmeinstellung:	Ja
Speicher für letzten Messwert:	Ja