La Crosse WS7394 Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr La Crosse WS7394 (16 Seiten) in der Kategorie Wetterstation. Dieser Bedienungsanleitung war fĂĽr 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/16
18
WEATHER STATION
Instruction Manual
INTRODUCTION:
Congratulations on purchasing this advanced weather station as an
example of innovative design and quality piece of engineering. Providing
radio controlled time, date, calendar, indoor and outdoor temperature,
indoor relative humidity, and air pressure history information. This unit will
never keep you guessing on current and future weather conditions.
Operation of this product is simple and straightforward. By reading this
operating manual, the user will receive a better understanding of the
Weather Station together with the optimum benefit of all its features.
FEATURES:
The Weather Station
• DCF Radio controlled time with manual setting option
• Time reception ON/OFF (user selectable)
• 12/24 hour time display
• Time zone option ±12 hours
• Weekday and day calendar display (year and month only in setting
mode)
• Weather forecasting with weather tendency indicator
• Indoor comfort indicator
• Temperature display in ºC/ºF
• Indoor and outdoor temperature display with MIN/MAX records and
time of reception
• Indoor humidity display as RH% with MIN/MAX records
• Relative air pressure hPa/ inHg with adjustable reference value
Stand
LCD Display
Function
keys
Battery
compartmen
Hanging hole
« Instant Transmission+» is the up and coming state-of-the-
art new wireless transmission technology, exclusively
designed and developed by LA CROSSE TECHNOLOGY.
“IT +” offers you an immediate update of all your outdoor
data measured from the transmitters: follow your climatic
variations in real-time!
19
• Weather icon sensitivity setting
• Relative air pressure history for the past 12 hours (electronic
barometer with barometric pressure trend)
• Wireless transmission at 868 MHz
• Signal reception intervals at 4 seconds
• Can receive up to 3 outdoor transmitters
• LCD contrast selectable
• Low battery indicator
• Table standing or wall mounting
The Outdoor Temperature Transmitter
• Remote transmission of outdoor temperature
to weather station by 868 MHz signal
• LCD showing current temperature
• Rain proof casing
• Wall mounting case
HOW TO INSTALL AND REPLACE BATTERIES IN THE
WEATHER STATION
The Weather Station uses 2 x AA, IEC LR6,
1.5V batteries. To install and replace the
batteries, please follow the steps below:
1. Insert finger or other solid object in the
space at the bottom center of the battery
compartment and lift up to remove the
cover.
2. Insert batteries observing the correct
polarity (see marking).
3. Replace compartment cover.
HOW TO INSTALL AND REPLACE BATTERIES IN THE
TEMPERATURE TRANSMITTER
The Temperature Transmitter uses 2 x AA, IEC, LR6,
1.5V batteries. To install and replace the batteries,
please follow the steps below:
1. Remove the cover.
2. Insert the batteries, observing the correct
polarity (see marking).
3. Replace the battery cover on the unit.
Note:
In the event of changing batteries in any of the units, all units need to be
reset by following the setting up procedures. This is due to a random
security code assigned by the transmitter at start-up. This code must be
received and stored by the Weather Station in the first 3 minutes of power
being supplied to the transmitter.
BATTERY CHANGE:
It is recommended to replace the batteries in all units on an annual basis
to ensure optimum accuracy of these units.
Please participate in the preservation of the environment.
Return used batteries to an authorized depot.
20
SETTING UP
WHEN ONE TRANSMITTER IS USED
1. First, insert the batteries in the transmitter (see “How to install and
replace batteries in the Termo-hygro outdoor transmitter”
above).
2. Within 2 minutes of powering up the transmitter, insert the batteries
in the Temperature Station (see “How to install and replace
batteries in the Weather Station” above). Once the batteries are in
place, all segments of the LCD will light up briefly and a short signal
tone will sound. Following the indoor temperature/humidity and the
time as 0:00 will be displayed. If these information are not displayed
on the LCD after 60 seconds, remove the batteries and wait for at
least 60 seconds before reinserting them. Once the indoor data is
displayed user may proceed to the next step.
3. After the batteries are inserted, the Weather station will start
receiving data signal from the transmitter. The outdoor temperature
data should then be displayed on the Weather station. If this does
not happen after 2 minutes, the batteries will need to be removed
from both units and reset from step 1.
4. In order to ensure sufficient 868 MHz transmission however, the
distance between the Weather Station and the transmitter should
not be more than 100 meters (see notes on “Positioning” and “868
MHz Reception”).
Note:
In the event of changing batteries of the units, ensure the batteries do not
spring free from the contacts. Always wait at least 1 minute after removing
the batteries before reinserting, otherwise start up and transmission
problems may occur.
WHEN MORE THAN ONE TRANSMITTER IS USED
1. User shall remove all the batteries from the Weather Station and
transmitters, and wait 60 seconds.
2. Insert the batteries in the first transmitter.
3. Within 2 minutes of powering up the first transmitter, insert the
batteries in the Weather Station. Once the batteries are in place, all
segments of the LCD will light up briefly and a short signal tine will
sound. Following the indoor temperature/humidity and the time as
0:00 will be displayed. If these information are not displayed on the
LCD after 60 seconds, remove the batteries from both units and wait
for at least 60 seconds before reinserting them.
4. The outdoor temperature data from the first transmitter (channel 1)
should then be displayed on the Weather Station. Also, the signal
reception icon will be displayed. If this does not happen after 2
minutes, the batteries will need to be removed from both units and
reset from step 1.
5. Insert the batteries in the second transmitter as soon as the outdoor
temperature and humidity readings from the first transmitter are
displayed on the Weather Station.
Note : User shall insert the batteries into the second transmitter
within 45 seconds after the Weather Station displays the information
of the first transmitter.
6. The outdoor temperature from the second transmitter and the
"channel 2" icon should then be displayed on the Weather Station. If
this does not happen after 2 minutes, the batteries will need to be
removed from all the units and reset from step 1.
7. Insert the batteries in the third transmitter as soon as the "channel 2"
icon and outdoor data are displayed on the Weather Station. Then
within 2 minutes, the channel 3 outdoor data from the third
transmitter will be displayed and the channel icon will shift back to


Produktspezifikationen

Marke: La Crosse
Kategorie: Wetterstation
Modell: WS7394

Brauchst du Hilfe?

Wenn Sie Hilfe mit La Crosse WS7394 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Wetterstation La Crosse

Bedienungsanleitung Wetterstation

Neueste Bedienungsanleitung fĂĽr -Kategorien-