La Crosse WS6827 Bedienungsanleitung
La Crosse
Wetterstation
WS6827
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für La Crosse WS6827 (4 Seiten) in der Kategorie Wetterstation. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/4
1
The Wireless Color Forecast Station features manual set time, date,
weather forecast, indoor and outdoor temperature/humidity, with
temperature alerts, and heat index and dew point, on a stylish, colorful,
and easy to read display. Use the integrated USB charging port to
charge your smartphone, camera or other device when the forecast
station operates on A/C power. Wireless transmission range of over 90
meters (300 feet) in open air, from transmitter to forecast station.
WIRELESS COLOR FORECAST STATION
THIS STATION LEARNS
Please allow 3-4 days for barometer calibration to generate an
accurate forecast.
SETUP INSTRUCTIONS STEP BY STEP
STEP 1:
Insert the 5-volt A/C power adapter
into the designated area on the
back of the forecast station.
Plug the A/C power adapter into a
wall outlet for continuous backlight
(ON/OFF), and dimmer feature.
STEP 2: (optional battery operation)
Remove battery cover from the forecast station: slide tab down and
pull out to remove the cover.
Insert 3 NEW AAA batteries (not included) into the back of the
forecast station. Observe the correct polarity (see marking inside the
battery compartment).
The forecast station will light up and show, indoor temperature,
humidity and time.
(Press and release the HAUT/BAS/OFF button to illuminate the
backlight for 8 seconds when using only battery power.)
STEP 3:
Ensure that the transmitter is within 3 meters (10 feet) of the forecast
station.
Remove battery cover from transmitter: Slide the battery cover down
and lift off the front.
Insert 2 NEW AA batteries (not included) into the
transmitter. Observe the correct polarity.
Within 3 minutes, the forecast station will show
readings in the Outdoor temperature area on the LCD.
Note: Use Alkaline batteries (or Lithium for temperatures
below -28.8°C/- 20°F ).
TRANSMITTER SIGNAL STRENGTH
After the batteries are inserted, the forecast station will search for the
outdoor temperature/humidity transmitter for 3 minutes.
The antenna symbol will flash during reception, and temperature
display will be dashes “---“.
The antenna symbol will scroll during transmitter synchronization.
If synchronization fails once, the antenna will lose one bar.
If synchronization fails twice, the antenna will lose two bars.
If reception continuously fails to receive 5 times, the antenna symbol
will be shown as .
The antenna will show full display with successful RF
(radio frequency) reception.
TROUBLESHOOTING
If the outdoor temperature is not displayed after three minutes, hold
the RECHERCHE CAPTEUR button on the forecast station for three
seconds to search for outdoor transmitter.
Next, remove the battery cover from the transmitter then press the TX
button to send a signal.
If it still does not receive the outdoor temperature, remove the A/C
cord and batteries from both the forecast station and the transmitter
for 15 minutes repeat setup instructions from step 1.
TIME/DATE
The REGLAGES button moves through the program menu and confirm
settings.
Use the button to increase a value.
Use the button to decrease a value.
SET TIME/DATE
Hold the REGLAGES button for three seconds to enter time set mode.
BEEP ON/OFF: BP ON (BEEP) will flash .The default is ON .Press
and release the arrow button to ON or OFF the BEEP button sound.
LANGUAGE: The language will flash. The default is FR. Use the
arrow buttons to select the language for weekday display (French,
Italian, Dutch, Spanish, Danish, English or German) and press the
REGLAGES button to confirm and move to 12/24 hour.
12/24-HOUR: The time format will flash. Use the ARROW buttons to
choose 12-hour or 24-hour time format and press the REGLAGES
button to confirm and move to hour.
HOUR: The Hour will flash. Use the ARROW buttons to choose the
hour, and press the REGLAGES button to confirm and move to
minutes.
MINUTES: The Minutes will flash. Use the ARROW buttons to
choose the minutes, and press the REGLAGES button to confirm and
move to the year.
YEAR: The Year will flash. Use the ARROW buttons to choose the
year, and press the REGLAGES button to confirm and move to the
month.
Wireless Color Forecast Station
WS6827 | Quick Setup Guide
2
MONTH: The Month will flash. Use the ARROW buttons to choose
the month, and press the REGLAGES button to confirm and move to
the date.
DATE: The Date will flash. Use the ARROW buttons to choose the
date, and press the REGLAGES button to confirm and move to
Fahrenheit/Celsius.
CELSIUS /FAHRENHEIT: °C or °F will flash. Use the ARROW
buttons to select Celsius or Fahrenheit. Press and release the
REGLAGES button to confirm and exit the program menu.
Note:
Up/down arrows: Press once to adjust by 1 unit, hold for fast scroll
adjustment.
When in setting mode of any feature, all the rest of the information of
the LCD should disappear, only concentrate in the setting of the
feature
Press the HAUT/BAS/OFF button at any time to exit or wait 20
seconds without pressing buttons to return to the normal time display.
ALARM TIME
The ALARME DE REVEIL button moves through the alarm set mode
and confirms settings.
Use the ARROW button to increase a value.
Use the ARROW button to decrease a value.
SET ALARM TIME
From normal time and temperature display mode, press and release the
ALARME DE REVEIL button once to show alarm time. Hold the
ALARME DE REVEIL button for three seconds to enter alarm set mode.
HOUR: The Hour will flash. Use the ARROW buttons to set the hour,
and press ALARME DE REVEIL button to confirm and switch to
minutes.
MINUTES: The Minutes will flash. Use the ARROW buttons to set the
minutes, Press and release the ALARME DE REVEIL button to exit.
ACTIVATE/DEACTIVATE TIME ALARM
In normal mode, press and release the ALARME DE REVEIL button
once to show alarm time.
Press and release the ALARME DE REVEIL button repeatedly to
activate or deactivate the Alarm. The alarm icon appears when
alarm is activated.
Note: The alarm will ring for 2 minutes then turn off if no buttons are
pressed.
SNOOZE ALARM
When the alarm sounds, press the HAUT/BAS/OFF button to snooze
the alarm for 10 minutes. The alarm icon flashes when the snooze
feature is active. The alarm icon will flash while the snooze feature
is active.
To stop alarm for one day, press any button but not HAUT/BAS/OFF
button, while in snooze mode. The alarm icon will show solid.
Note: Alarm is crescendo sound. When the alarm sounds, it continues
for 2 minute and then shuts off completely.
BACKLIGHT
Operating on A/C adapter, the backlight is on continuously when
operating the forecast station with the 5-volt A/C adapter.
Note: When the adapter is NOT in use, the HAUT/BAS/OFF light feature
is not available.
HAUT: The backlight is defaulted to high (= haut) at setup when the
Adapter is in use.
BAS: Press and release the HAUT/BAS/OFF button to dim the
backlight.
OFF: Press and release the HAUT/BAS/OFF button again to turn the
backlight off. Press and release the HAUT/BAS/OFF button again to
return to full strength.
Note: When the backlight is off, press any button to activate the
backlight for 10 seconds.
Operating on battery power only, press and release the any button
and the backlight will show for 10 seconds.
TEMPERATURE TREND ICONS
The indoor and outdoor temperature trend indicators will update every
30 minutes or less. These trends represent temperature changes over
the past three hours.
Temperature rising more than 1°C /2°F in the past three hours.
Temperature has not changed more than 1°C /2°F in the past
three hours.
Temperature falling more than 1°C / 2°F in the past three
hours.
HUMIDITY TREND ICONS
The indoor and outdoor humidity trend indicators will update every 30
minutes or less. These trends represent humidity changes over the past
three hours.
Temperature rising more than 3% in the past three hours.
Temperature has not changed more than 3% in the past three
hours.
Temperature falling more than 3% in the past three hours
USB CHARGE PORT
The integrated USB charging port (on front) will charge your smart
phone, camera or other devices when the forecast station is plugged
into a power outlet with the included 5V A/C adapter.
Note:
This is a power-output charging port. The charging port does not
supply power to the forecast station.
You cannot charge mobile devices when operating the clock on
battery power.
Begin charging your external device by connecting the device’s USB
charging cable (not included) to the USB charging port on the front of
the forecast station. Charging times will vary.
Some USB cables are for data transfer only and cannot be used for
charging. Make sure that the USB cable you use will charge your
device. Most USB cables included with mobile devices will work for
charging.
USB Power Output: 1A maximum current. Do NOT overload USB
port. Charge 1A devices or less only
HEAT INDEX & DEW POINT TEMPERATURE
HEAT INDEX
Heat Index combines the effects of heat and humidity. It is the apparent
temperature of how hot it feels to a human being. As humidity increases,
the body is unable to cool effectively. The temperature will feel warmer.
View Heat Index: From normal time and temperature display mode,
press the CHALEUR/PT ROSEE button once and Heat Index will show
instead of the outdoor ambient temperature.
Note: Heat index will be the same number as the temperature until the
outdoor temperature is above 26.7°C (80°F).
DEW POINT TEMPERATURE
Dew Point Temperature is the saturation point of the air, or the
temperature to which the air has to cool in order to create condensation.
The higher the dew points, the higher the moisture content of the air at a
given temperature.
3
View Dew Point Temperature: From normal time and temperature
display mode, press the CHALEUR/PT ROSEE button twice and Dew
Point temperature will show instead of the outdoor ambient temperature.
The words “Point de rosée” will show near outdoor temperatures.
Note: Dew Point temperature is lower than the actual temperature.
TEMPERATURE ALERTS
Press and release the ALERTE TEMP. button to toggle between the
temperature alerts. Hold the ALERTE TEMP. button to set individual
high and low alerts.
The bell icon indicates each alert that is active.
The TEMP. MAX button will turn a temperature alert ON. This button will
increase an alert value in Temp Alert set mode.
The TEMP. MIN button will turn a temperature alert OFF. This button will
decrease an alert value in Temp Alert set mode.
One or all of the high and low temperature alerts may be set.
Range for indoor temperature alert:
0°C to 50°C (+32°F to +122°F)
Range for outdoor temperature alert:
-40°C to 60°C(-40°F to 140°F)
SELECT TEMPERATURE ALERT VALUE
Hold the ALERTE TEMP. button for five seconds, until the forecast
station beeps, to select and set temperature alert values.
EXTERIEUR HA alert will be displayed. Press the ARROW buttons to
set the alert value, and press the ALERTE TEMP. button to confirm.
Then press the ALERTE TEMP. button again switch to OUTDOOR
LOW setting.
EXTERIEUR BA alert will be displayed. Press the ARROW buttons to
set the alert value, and press the ALERTE TEMP. button to confirm.
Then press the ALERTE TEMP. button again switch to INDOOR HI
setting.
INTERIEUR HA alert will be displayed. Press the ARROW buttons to
set the alert value, and press the ALERTE TEMP. button to confirm.
Then press the ALERTE TEMP. button again switch to INDOOR LOW
setting.
INTERIEUR BA alert will be displayed. Press the ARROW buttons to
choose the value, and press the ALERTE TEMP. button to confirm
and exit.
Note: After selecting temperature alert values use the next step to turn
individual alerts ON or OFF.
TEMPERATURE ALERTS ON/OFF
In normal mode, hold then release the ALERTE TEMP. button to
toggle between:
o Outdoor HI (Extérieur HA)
o Outdoor LO (Extérieur BA)
o Indoor HI (Intérieur HA)
o Indoor LO (Intérieur BA)
Press the TEMP. MAX button to turn the selected
alert ON. The alert icon appears when
alarm is activated.
Press the TEMP. MIN button to turn the selected alert OFF.
Note: When no temperature alerts are set, the Temperature
Alert area will show ALERTES OFF.
TEMPERATURE ALERT SOUNDS
When temperature alert sounds, the corresponding alert icon will
flash.
The alert beeps once every minute, until the temperature is out of
alert range.
Press any button to stop alert. The alert symbol will still show.
Turn alert OFF: In normal mode, hold and release the ALERTE
TEMP. button to select the alert to turn off. With HI or LO alert
selected, press the TEMP. MIN button to turn that alert OFF.
MIN/MAX TEMPERATURES
The forecast station will show the daily minimum and maximum
temperatures each day starting at midnight (00:00 ). The forecast station
automatically resets the min/max temperatures at midnight (00:00 ).
View MIN data: Press and release the TEMP. MIN button to view the
minimum Indoor and Outdoor Temperatures.
Reset MIN data: Hold the TEMP. MIN button for 5 seconds and the
Indoor and all Outdoor Minimum Temperatures will be reset. The
temperature area will show dashes briefly then return to current
temperatures.
View MAX data: Press and release the TEMP. MAX button to view
the maximum Indoor and Outdoor Temperatures.
Reset MAX data: Hold the TEMP. MAX button for 5 seconds and the
Indoor and all Outdoor Maximum Temperatures will be reset. The
temperature area will show dashes briefly then return to current
temperatures.
LOW BATTERY
When this low battery icon appears in the indoor (IN) reading
section, replace the batteries in the forecast station.
When this low battery icon appears in the outdoor (OUT)
readings section, replace the batteries in the outdoor transmitter.
FORECAST TENDENCY INDICATOR
The forecast tendency indicators in the upper right corner of the forecast
display indicate the rising or falling pressure trend.
The up trending arrow indicates the weather is improving. The down
trending arrow indicates the weather may worsen. When there is no
arrow the pressure is steady.
WEATHER FORECAST ICONS
The forecast station predicts weather condition of the next 12-hours
based on the change of atmospheric pressure with 70-75% accuracy.
Note: As weather conditions cannot be 100% correctly forecasted we
are not responsible for any loss caused by an incorrect forecast.
The forecast station samples the barometric pressure every twelve
minutes. These samples are averaged hourly and daily then stored in
nonvolatile memory. The three hour pressure icon change is based off of
the last four average hourly readings.
THIS STATION LEARNS
The forecast station calibrates barometric pressure based on its
location over a period of time to generate an accurate, personal
forecast. Please allow 3 to 4 days for barometer calibration.
IMPORTANT: As the forecast station builds memory, it will compare the
current average pressure to the past forty day average pressure for
increased accuracy. The longer the forecast station operates in one
location the more accurate the forecast icons will be.
CARE AND MAINTENANCE
Do Not Mix Old and New Batteries
Do Not Mix Alkaline, Standard, Lithium or Rechargeable
Batteries
Produktspezifikationen
| Marke: | La Crosse |
| Kategorie: | Wetterstation |
| Modell: | WS6827 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit La Crosse WS6827 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Wetterstation La Crosse
23 August 2024
22 August 2024
22 August 2024
22 August 2024
20 August 2024
17 August 2024
16 August 2024
16 August 2024
16 August 2024
16 August 2024
Bedienungsanleitung Wetterstation
- Wetterstation Clatronic
- Wetterstation Hama
- Wetterstation Lexibook
- Wetterstation Nedis
- Wetterstation Tchibo
- Wetterstation Clas Ohlson
- Wetterstation Cotech
- Wetterstation Profile
- Wetterstation Adler
- Wetterstation Camry
- Wetterstation Velleman
- Wetterstation ADE
- Wetterstation Alecto
- Wetterstation Auriol
- Wetterstation Beurer
- Wetterstation Bresser
- Wetterstation Cresta
- Wetterstation Day
- Wetterstation Denver
- Wetterstation Dexford
- Wetterstation Durabase
- Wetterstation ECG
- Wetterstation EMOS
- Wetterstation Eurochron
- Wetterstation Gira
- Wetterstation HomeMatic
- Wetterstation Irox
- Wetterstation Jacob Jensen
- Wetterstation Kemot
- Wetterstation König
- Wetterstation MarQuant
- Wetterstation Mebus
- Wetterstation Medisana
- Wetterstation Mesko
- Wetterstation National Geographic
- Wetterstation Prologue
- Wetterstation Renkforce
- Wetterstation Sempre
- Wetterstation Techno Line
- Wetterstation Technoline
- Wetterstation Telefunken
- Wetterstation TFA
- Wetterstation ThinkGizmos
- Wetterstation Thomson
- Wetterstation Trevi
- Wetterstation Ventus
- Wetterstation Weinberger
- Wetterstation Ytora
- Wetterstation Trotec
- Wetterstation Blaupunkt
- Wetterstation Braun
- Wetterstation Rocktrail
- Wetterstation Daewoo
- Wetterstation Pyle
- Wetterstation Muse
- Wetterstation Avidsen
- Wetterstation Elro
- Wetterstation GoGEN
- Wetterstation Hyundai
- Wetterstation Orion
- Wetterstation Livoo
- Wetterstation Perel
- Wetterstation Soehnle
- Wetterstation Balance
- Wetterstation Fysic
- Wetterstation Sencor
- Wetterstation Krontaler
- Wetterstation Honeywell
- Wetterstation MINOX
- Wetterstation Lowrance
- Wetterstation Globaltronics
- Wetterstation ELV
- Wetterstation Guardo
- Wetterstation Unitec
- Wetterstation Netatmo
- Wetterstation Ascot
- Wetterstation Theben
- Wetterstation Brandson
- Wetterstation Tanita
- Wetterstation JUNG
- Wetterstation Johnson
- Wetterstation OBH Nordica
- Wetterstation Optex
- Wetterstation Davis
- Wetterstation Levenhuk
- Wetterstation Vitek
- Wetterstation Prestigio
- Wetterstation EQ-3
- Wetterstation EVE
- Wetterstation Extech
- Wetterstation Daikin
- Wetterstation Fluke
- Wetterstation La Crosse Technology
- Wetterstation Oregon Scientific
- Wetterstation Homematic IP
- Wetterstation EQ3
- Wetterstation Elgato
- Wetterstation Digi-tech
- Wetterstation DMV Electronics
- Wetterstation Ea2 LABS
- Wetterstation EMOS SELECT
- Wetterstation Garni
- Wetterstation Hesdo
- Wetterstation Inovalley
- Wetterstation IT
- Wetterstation Kaindle
- Wetterstation Meade
- Wetterstation Nasa
- Wetterstation Nor-tec
- Wetterstation Otio
- Wetterstation Paget Trading
- Wetterstation PCE Instruments
- Wetterstation Saphir
- Wetterstation Saxon
- Wetterstation Taylor
- Wetterstation Thierry Mugler
- Wetterstation UPM
- Wetterstation Uzoli
- Wetterstation Waldbeck
- Wetterstation Xeecom ApS
- Wetterstation TFA Dostmann
- Wetterstation Vimar
- Wetterstation PeakTech
- Wetterstation AcuRite
- Wetterstation Ease Electronicz
- Wetterstation Chauvin Arnoux
- Wetterstation YONO
- Wetterstation Brigmton
- Wetterstation Chacon
- Wetterstation Baldr
- Wetterstation Garin
- Wetterstation ChiliTec
- Wetterstation Global Water
- Wetterstation Greisinger
- Wetterstation Marathon
- Wetterstation Majestic
- Wetterstation Gewiss
- Wetterstation ClimeMET
- Wetterstation Buienradar
- Wetterstation Balance Meteo
- Wetterstation Rebel
- Wetterstation JDC
- Wetterstation Greenure
- Wetterstation Browin
- Wetterstation Setti+
- Wetterstation Bearware
Neueste Bedienungsanleitung für -Kategorien-
15 Oktober 2024
8 Oktober 2024
5 Oktober 2024
3 Oktober 2024
2 Oktober 2024
30 September 2024
29 September 2024
29 September 2024
24 September 2024
24 September 2024