La Crosse Technology WS-9410U Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für La Crosse Technology WS-9410U (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
Humidity level
bar graph
Indoor temperature
in ºF
Indoor comfort
indicator icon
Indoor relative
humidity in %
Low battery icon
TEMPERATURE STATION
1. Insert finger or other solid object in the space at the right
center of the battery compartment and lift up to remove
the cover.
INTRODUCTION:
Congratulations on purchasing this temperature station with indoor temperature, humidity and comfort
indicator. To enjoy the full benefits of this innovative product, please read this operating manual
completely before operating. 2. Insert batteries observing the correct polarity (see
marking).
3. Replace battery compartment cover.
TEMPERATURE STATION:
TO RESET THE TEMPERATURE STATION:
1. Remove the batteries from the Temperature Station
2. Wait at least 30 seconds and repeat the procedures in Setting up above
BATTERY CHANGE:
It is recommended to replace the batteries in all units on an annual basis to ensure optimum accuracy of
this unit.
Please participate in the preservation of the environment. Return used batteries to an
authorized depot.
FUNCTION KEYS:
FEATURES: The weather station has 1 key function that is easy to use:
Indoor temperature display in degree Fahrenheit (°F)
Indoor humidity display in RH% MIN/MAX key:
Indoor temperature and humidity display with MIN/MAX recordings Toggle between MIN/MAX indoor temperature
Relative humidity level bar Toggle between MIN/MAX indoor humidity data
Indoor comfort indicator icon Reset MIN/MAX records by pressing and holding the key for 2 seconds
Low battery indicator
LCD SCREEN
Wall mounting or table standing
The Temperature Station’s LCD is divided into 3 sections, displaying humidity level in a bar graph format,
indoor humidity and indoor temperature.
SETTING UP:
Please follow these steps to ensure that your new temperature station works correctly:
1. Insert the batteries into the temperature station. See How to install and replace batteries in the
Temperature Station” below.
2. Once the batteries are in place, all segments of the LCD will light up briefly. Then the indoor
temperature, humidity and level bar will be displayed. If the indoor temperature is not displayed
after a few seconds, remove the batteries and wait for at least 30 seconds before reinserting them.
HOW TO INSTALL AND REPLACE BATTERIES IN THE WEATHER STATION:
The temperature station uses 2 x AAA, 1.5V batteries. To install and replace the batteries, please follow
the steps below:
Hanging hole
Battery
compartment
Foldable stand MIN/MAX key
LCD
display
CARE AND MAINTENANCE:
Avoid placing the unit in areas prone to vibration and shock as these may cause damage.
Avoid areas where the unit can be exposed to sudden changes in temperature, i.e. direct sunlight,
extreme cold and wet/moist conditions as these will lead to rapid changes in temperature which
reduces the accuracy of readings.
When cleaning the LCD and casing, use a soft damp cloth only. Do not use solvents or scouring
agents.
Do not submerge the unit into water.
Immediately remove all low powered batteries to avoid leakage and damage.
Replace only with new batteries of the recommended size.
Do not make any repairs to the unit. Please return it to the original point of purchase for repair by a
qualified engineer. Opening and tampering with the unit may invalidate its guarantee.
SPECIFICATIONS:
Indoor temperature measuring range: 14.2° to 122°F with 0.2ºF resolution
(“OF.LºF” displayed if outside this range)
Indoor humidity measuring range : 1% to 99% with 3 digits display resolution
(“- - . -%” displayed if outside this range)
Indoor temperature and humidity checking intervals: every 8 seconds
Power source : 2 x AAA, 1.5V batteries
Battery life : Approximately 12 months (Alkaline batteries recommended)
Dimensions (L x W x H) : 6” x 5.5” x 0.65” (152.2 x 141.2 x 17 mm)
LIABILITY DISCLAIMER:
The manufacturer and supplier cannot accept any responsibility for any incorrect readings and any
consequences that occur should an inaccurate reading take place.
This product is designed for use in the home only as indication of the temperature.
This product is not to be used for medical purposes or for public information.
The specifications of this product may change without prior notice.
This product is not a toy. Keep out of the reach of children.
No part of this manual may be reproduced without written authorization of the manufacturer.
WARRANTY INFORMATION:
La Crosse Technology provides a 1-year warranty on this temperature station. Contact La Crosse
Technology immediately upon discovery of any defects covered by this warranty.
Before sending the temperature station in for repairs, contact La Crosse Technology. The temperature
station will be repaired or replaced with the same or similar model.
This warranty does not cover any defects resulting from improper use, unauthorized repairs, faulty
batteries, or the temperature stations inability to receive a signal due to any source of interference.
LA CROSSE TECHNOLOGY WILL NOT ASSUME LIABILITY FOR INCIDENTAL, CONSEQUENTIAL,
PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE OPERATION OR
MALFUNCTION OF THIS TEMPERATURE STATION. THIS PRODUCT IS NOT TO BE USED FOR
MEDICAL PURPOSES OR FOR PUBLIC INFORMATION. THIS PRODUCT IS NOT A TOY. KEEP OUT
OF CHILDRE’S REACH.
This warranty gives you specific legal rights. You may also have other rights specific to your State.
Some States do no allow the exclusion of consequential or incidental damages therefore the above
exclusion of limitation may not apply to you.
For warranty work, technical support, or information contact
La Crosse Technology
190 Main Street
La Crescent, MN 55947
Phone: 507.895.7095
Fax: 507.895.8000
e-mail:
support@lacrossetechnology.com
(warranty work)
sales@lacrossetechnology.com
(information on other products)
web:
www.lacrossetechnology.com
All rights reserved. This handbook must not be reproduced in any form, even in excerpts, or duplicated or
processed using electronic, mechanical or chemical procedures without written permission of the
publisher.
This handbook may contain mistakes and printing errors. The information in this handbook is regularly
checked and corrections made in the next issue. We accept no liability for technical mistakes or printing
errors, or their consequences.
All trademarks and patents are acknowledged.


Produktspezifikationen

Marke: La Crosse Technology
Kategorie: Nicht kategorisiert
Modell: WS-9410U

Brauchst du Hilfe?

Wenn Sie Hilfe mit La Crosse Technology WS-9410U benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert La Crosse Technology

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-