La Crosse Technology WS-9119U Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr La Crosse Technology WS-9119U (24 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂĽr 33 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/24
WS-9119U
INTELLIGENT WEATHER STATION
Instruction Manual
INTRODUCTION:
Congratulations on purchasing this state-of-the-art weather station as an example of excellent design and innovative
measuring technique. Featuring radio controlled time, date, calendar, weather forecast, moon phase, indoor and
outdoor temperature and humidity, air pressure and various alarm settings for different weather conditions, this weather
station will never keep you guessing on current and future weather conditions. Operation of this product is simple and
straightforward. By reading this operating manual, the user will however receive a better understanding of the Intelligent
Weather Station together with the optimum benefit of all its features.
FEATURES:
The Intelligent Weather Station
Hanging hole
Battery
compartment
LCD Display
Function Keys
Weather
information text
Removable Stand
• WWVB Radio-controlled time with manual setting option
• WWVB reception ON/OFF (user selectable)
• 12/24 hour time display
• Time zone option ±12 hours
• Calendar display (weekday, date, month, year)
• Time alarm settings
• 12 Moon phases display throughout the year
• Weather forecasting with 4 weather icons and weather tendency indicator
• Temperature display in °F/ºC
• Humidity display as RH%
• Indoor temperature and humidity display with MIN/MAX and time/date of recording
• Indoor comfort indicator
• Low/High indoor temperature alarm
• Low/High indoor humidity alarm
• Outdoor temperature and humidity display with MIN/MAX and time/date of recording
• Low/High outdoor temperature alarm
• Low/High outdoor humidity alarm
• Relative air pressure unit in hPa, inHg, or mmHg
• Air pressure tendency indicator for last 36h (bar graph format)
• Low pressure alarm
• “Intelligent” weather information display
• Can receive up to 3 transmitters
1
• LCD contrast selectable
• Low battery indicator
• EL back-light
• Display in 3 languages selectable: English, German and French
• Wall mounting or table standing
The Remote Temperature/Humidity Sensor
• Remote transmission of outdoor temperature and humidity to weather station by 433 MHz
signal
• Weather resistant casing
• Wall mounting case
• Mounting at a sheltered place. Avoid direct rain and sunshine
QUICK SET-UP GUIDE
Hint: Use good quality Alkaline Batteries and avoid rechargeable batteries.
1. Have the intelligent weather station and remote temperature/humidity sensor 3 to 5 feet
apart.
2. Batteries should be out of both the intelligent weather station and remote
temperature/humidity sensor units for 10 minutes.
3. Place the batteries into the remote temperature/humidity sensor first then into the
intelligent weather station.
4. DO NOT PRESS ANY BUTTONS FOR 15 MINUTES.
In this time the intelligent weather station and remote temperature/humidity sensor will start to talk to
each other and the display will show the intelligent temperature/humidity, outdoor temperature/humidity,
heat index and dew point. If the intelligent weather station does not display all information after the 15
minutes please retry the set up as stated above. After all information has been displayed for 15 minutes
you can place your sensors outdoors and set your time.
Important Notes on Set-up and Operation
• The remote temperature/humidity sensor should be placed in a dry, shaded area.
• Fog and mist will not harm your remote temperature/humidity sensor but direct rain must be
avoided.
• The remote temperature/humidity sensor has a range of 330 feet. Any walls that the signal will have
to pass through will reduce distance. An outdoor wall or window can have up to 30 feet of
resistance and an interior wall can have up to 20 feet of resistance. Your distance plus resistance
should not exceed 330 ft. in a straight line.
• The remote temperature/humidity sensor transmits a signal every minute. After the batteries have
been installed, the intelligent weather station will search for the signal for a duration of 4 minutes. If
there is no temperature or humidity reading in the OUTDOOR LCD after 4 minutes, make sure the
units are within range of each other, or repeat the battery installation procedure.
• If a button is pressed before the intelligent weather station receives the signal from the remote
temperature/humidity sensor, you will need to follow the battery installation procedure again.
To complete the set up of your new wireless weather station after the 15 minutes have passed please
follow the steps that follow in the Detailed Set-Up Guide.
2
HOW TO INSTALL AND REPLACE BATTERIES IN THE INTELLIGENT WEATHER STATION
The intelligent weather station uses 3 AA (alkaline recommended) batteries. When the batteries need to be replaced the
low battery symbol will appear on the LCD.
To install and replace the batteries, please follow the steps below:
1. Insert finger or other solid object in the space at the bottom center of the
battery compartment and lift up to remove the cover.
2. Insert batteries observing the correct polarity (see battery compartment
marking).
3. Replace battery cover.
HOW TO INSTALL AND REPLACE BATTERIES IN THE REMOTE TEMPERATURE/HUMIDITY
SENSOR
The remote temperature/humidity sensor uses 2 x AA IEC LR6, 1.5V batteries. To install and replace
the batteries, please follow the steps below:
1. Remove the battery cover at the front side with a small screwdriver.
2. Insert the batteries, observing the correct polarity (see battery compartment marking).
3. Replace the battery cover on the unit.
Note:
When changing the batteries in any of the units, all units need to be reset by following the setting up procedures. This is
because the transmitter at start-up assigns a random security code and this code must be received and stored by the
intelligent weather station in the first 3 minutes of power being supplied to it.
BATTERY CHANGE:
It is recommended to replace the batteries in all units on an annual basis to ensure optimum accuracy of these units.
Please participate in the preservation of the environment. Return used batteries to an authorized
facility.
ABOUT WWVB (Radio Controlled Time)
The NIST (National Institute of Standards and Technology—Time and Frequency Division) WWVB radio station is
located in Ft. Collins, Colorado, and transmits the exact time and date signal continuously throughout the United States
at 60 kHz. The signal can be received up to 2,000 miles away through the internal antenna in the Weather Station.
However, due to the nature of the Earth’s Ionosphere, reception is very limited during daylight hours. The weather
station will search for a signal every night when reception is best. The WWVB radio station derives its signal from the
NIST Atomic clock in Boulder, Colorado. A team of atomic physicists is continually measuring every second, of every
day, to an accuracy of ten billionths of a second per day. These physicists have created an international standard,
measuring a second as 9,192,631,770 vibrations of a Cesium-133 atom in a vacuum. For more information on the
atomic clock and WWVB please see the NIST website at http://www.boulder.nist.gov/timefreq/stations/wwvb.htm.
3


Produktspezifikationen

Marke: La Crosse Technology
Kategorie: Nicht kategorisiert
Modell: WS-9119U

Brauchst du Hilfe?

Wenn Sie Hilfe mit La Crosse Technology WS-9119U benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert La Crosse Technology

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂĽr -Kategorien-