La Crosse Technology LTV-WSDTH04SO Bedienungsanleitung

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für La Crosse Technology LTV-WSDTH04SO (6 Seiten) in der Kategorie niet gecategoriseerd. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/6
B R E E Z E P R O S E N S O R
Model: LTV-WSDTH04So
DC: 012121
R E P L AC E M E N T S E N S O R - S TAT I O N C O N N E C T I O N
ADD TO THE LA CROSSE VIEW APP
1. Open your La Crosse View app, select the Devices tab from the main menu, and
then press the ADD DEVICE or PLUS (+) button near the bottom of the page.
2. Scan or type in the La Crosse View Device ID located on the bottom
of the sensor.
3. Give the device a Name and Location, and then press Save. Provided you have
the station connected to the Internet, you should begin to see your sensor data in
the app within the next few minutes.
For help with adding and removing devices within the La Crosse View app, please
view our video here: bit.ly/add_devices
La Crosse View Device ID
Page | 2
AA
AA
AA
For users setting this up as a replacement sensor, follow these steps to get it synced
with your display:
1. Press and release the SENSOR button on your station until you see the WIND
section light up. Hold the MINUS (-) button to delete the original sensor. The
Reception Icon will begin to animate, indicating it is searching for a new sensor
connection.
2. Install 3 new AA alkaline batteries into the Breeze Pro sensor (as shown below).
3. Keep the sensor near the display and allow 5 minutes for the sensor readings to
appear.
MOUNTING
The illustrations above are not to scale and are for informative purposes only.
For additional sensor information, visit: www.lacrossetechnology.com/support
Page | 3
Mast
The horizontal conduit where the sensor
attaches. This Piece will connect to either
the Adjustable Base or Pole Adapter.
Pole Adapter
Used in place of the Adjustable Base
for mounting on top of cylindrical
conduits.
Alignment Arrows
Provide exact 90 or 180 degree
angles when aligned with the arrow
on the Mast.
1-Inch Maximum Pole Diameter
Hand Screw
Used to lock down and secure the Mast
to the Adjustable Base or Pole Adapter.
Included Mounting Accessories
For Accurate Measurements
-Ensure the sensor is mounted level with the Solar Panel facing the sun. This will optimize battery life and
transmit correct wind direction readings. This sensor is designed for use in the Southerm Hemisphere.
-Ideally, the Breeze Pro Sensor should be mounted on the tallest object in your area. Avoid positioning
the sensor in line, or below eaves, rooflines, trees, or other objects that may obstruct wind readings.
-Make sure all screws on the Mounting Bracket, Wind Cups, Wind Vane and Battery Compartment are
securely fastened.
- The sensor should be mounted with the wind cups on top.

Produktspezifikationen

Marke: La Crosse Technology
Kategorie: niet gecategoriseerd
Modell: LTV-WSDTH04SO

Brauchst du Hilfe?

Wenn Sie Hilfe mit La Crosse Technology LTV-WSDTH04SO benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung niet gecategoriseerd La Crosse Technology

Bedienungsanleitung niet gecategoriseerd

Neueste Bedienungsanleitung für -Kategorien-