La Crosse Technology 925-1418 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für La Crosse Technology 925-1418 (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 19 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
Sensor Weather Shield
Model: 925-1418
DC: 021318
The Sensor Weather Shield is designed to protect your outdoor sensors from rain and snow.
This shield will oer limited protection from the sun’s heat.
• Temperature sensor
• Temperature/Humidity sensor
• Probe sensor
• Twist the cover clockwise to remove the base.
• Attach the Velcro tape to the sensor and to the upright on the base. This keeps the sensor from tipping.
• Alternately, secure the sensor with a zip tie.
• With a probe sensor, be sure the probe wire fits through the round hole in the base.
• Place cover over sensor and base. Twist counter clockwise to lock into place. Sensor must fit entirely in
the sensor shield to be protected.
• Mount the sensor shield so that the sensor is in range of the display.
Slots for zip ties
Holes for mounting screws
Holes for mounting screws
Sensor
Velcro Tape
Upright
Base
If you have a sensor with a
probe wire, there is a hole for
the probe to exit.
Note: Sensor and probe are
not included
INSERT SENSOR (not included)
MOUNT SENSOR SHIELD
Mount to a flat surface:
Twist the cover clockwise to remove the base.
Place one long screw through the center hole of the base.
Tighten until the head of the screw is flat with the base. Do not over tighten.
Mount to a wall or post:
Slide the mounting bracket down and remove from the cover.
Take note of the UP ARROW on the back of the bracket.
Find a shaded location and attach the bracket (arrow UP) with the four screws (included), or with the two zip ties (included).
Allow room to slide cover onto bracket.Note:
Slide the shield down onto the bracket.
DIMENSIONS: 7.00” H x 3.73” W x 3.98” D (177.8 x 94.74 x 101.9 mm)
WARRANTY & SUPPORT
La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to
manufacturing defects in materials & workmanship.
For Full Warranty Details and online support, Visit: www.lacrossetechnology.com/support
For warranty work, technical support or other information contact out friendly support staff:
La Crosse Technology, Ltd
2830 South 26th St
La Crosse, WI 54601
Contact Support: 1-608-782-1610


Produktspezifikationen

Marke: La Crosse Technology
Kategorie: Nicht kategorisiert
Modell: 925-1418

Brauchst du Hilfe?

Wenn Sie Hilfe mit La Crosse Technology 925-1418 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert La Crosse Technology

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-