Kress KG260E.9 Bedienungsanleitung
Kress
Heggenschaar
KG260E.9
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Kress KG260E.9 (16 Seiten) in der Kategorie Heggenschaar. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/16
SAFETY AND OPERATING MANUAL
Cordless Hedge Trimmer
KG259E KG259E.X
KG260E KG260E.X
3
Cordless Hedge Trimmer
KG259E KG259E.X
KG260E KG260E.X
PRODUCT SAFETY
GENERAL POWER TOOL SAFETY
WARNINGS
WARNING Read all safety warnings,
instructions, illustrations and specications
provided with this power tool. Failure to follow the
warnings and instructions may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1. Work area safety
a) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b) Do not operate power tools in explosive atmospheres,
such as in the presence of ammable liquids, gases or
dust. Power tools create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose
control.
2. Electrical safety
a) Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric
shock.
e) When operating a power tool outdoors, use an extension
cord suitable for outdoor use. Use of a cord suitable
for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
3. Personal safety
a) Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the inuence of drugs,
alcohol or medication. A moment of inattention while
operating power tools may result in serious personal
injury.
b) Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will
reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is
in the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch
or energising power tools that have the switch on
invites accidents.
d) Remove any adjusting key or wrench before turning the
power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal
injury.
e) Do not overreach. Keep proper footing and balance at all
times. This enables better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
g) If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce
dust-related hazards.
h) Do not let familiarity gained from frequent use of tools
allow you to become complacent and ignore tool safety
principles. A careless action can cause severe injury
within a fraction of a second.
4. Power tool use and care
a) Do not force the power tool. Use the correct power tool
for your application. The correct power tool will do
the job better and safer at the rate for which it was
designed.
b) Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the
risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into account
the working conditions and the work to be performed.
Use of the power tool for operations different from
those intended could result in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean and free
from oil and grease. Slippery handles and grasping
surfaces do not allow for safe handling and control
of the tool in unexpected situations.
Produktspezifikationen
Marke: | Kress |
Kategorie: | Heggenschaar |
Modell: | KG260E.9 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Kress KG260E.9 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Heggenschaar Kress
23 August 2024
23 August 2024
23 August 2024
23 August 2024
Bedienungsanleitung Heggenschaar
- Heggenschaar Hanseatic
- Heggenschaar Makita
- Heggenschaar Bosch
- Heggenschaar Vonroc
- Heggenschaar Black And Decker
- Heggenschaar Cocraft
- Heggenschaar FERM
- Heggenschaar Ryobi
- Heggenschaar Skil
- Heggenschaar Topcraft
- Heggenschaar Trotec
- Heggenschaar DeWalt
- Heggenschaar Einhell
- Heggenschaar Worx
- Heggenschaar Hikoki
- Heggenschaar Hitachi
- Heggenschaar Hyundai
- Heggenschaar Fuxtec
- Heggenschaar Metabo
- Heggenschaar Kärcher
- Heggenschaar Güde
- Heggenschaar Levita
- Heggenschaar Meec Tools
- Heggenschaar Fieldmann
- Heggenschaar Husqvarna
- Heggenschaar Stihl
- Heggenschaar Pattfield
- Heggenschaar Honda
- Heggenschaar Cramer
- Heggenschaar Florabest
- Heggenschaar Grouw
- Heggenschaar Stiga
- Heggenschaar Greenworks
- Heggenschaar Zipper
- Heggenschaar Baumr-AG
- Heggenschaar Brandson
- Heggenschaar Batavia
- Heggenschaar Dolmar
- Heggenschaar AL-KO
- Heggenschaar Gardena
- Heggenschaar CMI
- Heggenschaar Wolf Garten
- Heggenschaar Craftsman
- Heggenschaar Powerplus
- Heggenschaar Kingcraft
- Heggenschaar Echo
- Heggenschaar Toledo
- Heggenschaar McCulloch
- Heggenschaar Ozito
- Heggenschaar Sun Joe
- Heggenschaar Texas
- Heggenschaar VARO
- Heggenschaar Spear & Jackson
- Heggenschaar Efco
- Heggenschaar Eurogarden
- Heggenschaar Ferrex
- Heggenschaar Flymo
- Heggenschaar Garden Feelings
- Heggenschaar Garden Groom
- Heggenschaar Gardenline
- Heggenschaar Gartenmeister
- Heggenschaar Grizzly
- Heggenschaar Hoberg
- Heggenschaar HURRICANE
- Heggenschaar Kaaz
- Heggenschaar Kibani
- Heggenschaar Lux Tools
- Heggenschaar Mac Allister
- Heggenschaar McGregor
- Heggenschaar Shindaiwa
- Heggenschaar Tanaka
- Heggenschaar Powerworks
- Heggenschaar Sovereign
- Heggenschaar Challenge
- Heggenschaar Palmera
- Heggenschaar MacAllister
- Heggenschaar Jonsered
- Heggenschaar G-Technology
- Heggenschaar Anova
- Heggenschaar Yellow Garden Line
- Heggenschaar LawnMaster
- Heggenschaar Ergotools Pattfield
- Heggenschaar Bestgreen
- Heggenschaar Maruyama
- Heggenschaar Maxbear
Neueste Bedienungsanleitung für -Kategorien-
1 Oktober 2024
30 September 2024
30 September 2024
29 September 2024
28 September 2024
27 September 2024
26 September 2024
23 September 2024
22 September 2024
20 September 2024