Kramer DTAXRC2-OUT2-F34 Bedienungsanleitung

Kramer Nicht kategorisiert DTAXRC2-OUT2-F34

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Kramer DTAXRC2-OUT2-F34 (1 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 26 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/1
VS- Card 34 Family Quick Start
P/N:
2 9 0 0 - 3 0 1 2 0 9 QS
Rev:
1
Scan for full manual
VS-34 Family Card Installation Sheet
Quick Start Guide
This guide helps you install and use your VS-34 Family Card for the rst time.
Go to www.kramerav.com/downloads/VS-34FD to download the latest user manual.
The attached card mounts in one of the slots on the rear of the chassis. Slots are numbered from left to right.
(The process for inserting cards is the same for all cards and the figures are for illustration purposes only.)
Input and output cards m be mounted in any slotay .
To install an I/O card:
1. Power o the machine and all devices connected to it.
2. Using a Phillips screwdriver, loosen the screws at the top and bottom of the blanking plate.
3. Remove the blanking plate from the slot and store it for possible future use.
4. Remove the new card from its shipping box and anti-ESD bag.
5. Holding the card by the lower handle, align the card with the plastic guide rails.
6. Slide the card into the chassis until the front of the card contacts the connector inside the chassis.
7. Press the card rmly into the slot until the
connector plate is ush with the rear panel of
the chassis and the connector is fully seated.
8. Using a Phillips screwdriver, tighten the
retaining screws at the top and bottom of the
card to secure it to the chassis.
9. Power on the machine and follow the
procedure in the user manual to congure
the new card.
10. Power on the peripheral devices.
VS- HDMI Card 34
For optimum range and performance use the recommended Kramer cables available at www.kramerav.com.
Using third-party cables may cause damage!
Safety Instructions
Caution: There are no operator serviceable parts inside the unit.
Warning: Use only the power cord that is supplied with the unit.
Warning: Do not open the unit. High voltages can cause electrical shock! Servicing by qualied personnel only.
Warning: Disconnect the power and unplug the unit from the wall before installing.
See for updated safety information www.kramerav.com

Produktspezifikationen

Marke: Kramer
Kategorie: Nicht kategorisiert
Modell: DTAXRC2-OUT2-F34
Breite: 250 mm
Tiefe: 130 mm
Gewicht: 300 g
Produktfarbe: Schwarz
Höhe: 20 mm
Betriebstemperatur: 0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb: 10 - 90 %
Verpackungsbreite: 293 mm
Verpackungstiefe: 165 mm
Verpackungshöhe: 59 mm
Paketgewicht: 500 g
Zertifizierung: CE, RoHs, WEEE
Stromverbrauch (Standardbetrieb): 21.5 W
Temperaturbereich bei Lagerung: -40 - 70 °C
RS-232 port: 2
Anzahl RJ-45-Anschlüsse: 1

Brauchst du Hilfe?

Wenn Sie Hilfe mit Kramer DTAXRC2-OUT2-F34 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Kramer

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-