Korg Liano Bedienungsanleitung

Korg Klavier Liano

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Korg Liano (3 Seiten) in der Kategorie Klavier. Dieser Bedienungsanleitung war für 19 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/3
Precautions
Location
Using the unit in the following locations can result in a malfunction.
In direct sunlight
Locations of extreme temperature or humidity
Excessively dusty or dirty locations
Locations of excessive vibration
Close to magnetic elds
Power supply
Please connect the designated AC adapter to an AC outlet of the correct
voltage. Do not connect it to an AC outlet of voltage other than that for
which your unit is intended.
Interference with other electrical devices
Radios and televisions placed nearby may experience reception interference.
Operate this unit at a suitable distance from radios and televisions.
Handling
To avoid breakage, do not apply excessive force to the switches or controls.
Care
If the exterior becomes dirty, wipe it with a clean, dry cloth. Do not use liq-
uid cleaners such as benzene or thinner, or cleaning compounds or am-
mable polishes.
Keep this manual
After reading this manual, please keep it for later reference.
Keeping foreign matter out of your equipment
Never set any container with liquid in it near this equipment. If liquid gets
into the equipment, it could cause a breakdown, re, or electrical shock.
Be careful not to let metal objects get into the equipment. If something
does slip into the equipment, unplug the AC adapter from the wall outlet.
Then contact your nearest Korg dealer or the store where the equipment
was purchased.
* All product names and company names are the trademarks or regis-
tered trademarks of their respective owners.
IMPORTANT NOTICE TO CONSUMERS
This product has been manufactured according to strict specifications and
voltage requirements that are applicable in the country in which it is intend-
ed that this product should be used. If you have purchased this product via
the internet, through mail order, and/or via a telephone sale, you must verify
that this product is intended to be used in the country in which you reside.
WARNING: Use of this product in any country other than that for which it is
intended could be dangerous and could invalidate the manufacturer’s or dis-
tributor’s warranty.
Please also retain your receipt as proof of purchase otherwise your product
may be disqualied from the manufacturers or distributors warranty.
THE FCC REGULATION WARNING (for USA)
NOTE: This equipment has been tested and found to comply with the lim-
its for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be deter-
mined by turning the equipment oand on, the user is encouraged to
try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
If items such as cables are included with this equipment, you must use
those included items.
Unauthorized changes or modication to this system can void the user’s
authority to operate this equipment.
SUPPLIER’S DECLARATION OF CONFORMITY (for USA)
Responsible Party : KORG USA INC.
Address : 316 SOUTH SERVICE ROAD, MELVILLE, NY
Telephone : 1-631-390-6500
Equipment Type : DIGITAL PIANO
Model : L1
This device complies with Part 15 of FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may
cause undesired operation.
Notice regarding disposal (EU only)
When this crossed-out wheeled bin” symbol is displayed on the
product, owner’s manual, battery, or battery package, it signies
that when you wish to dispose of this product, manual, package
or battery you must do so in an approved manner. Do not discard
this product, manual, package or battery along with ordinary
household waste. Disposing in the correct manner will prevent
harm to human health and potential damage to the environment.
Since the correct method of disposal will depend on the applicable laws
and regulations in your locality, please contact your local administrative
body for details. If the battery contains heavy metals in excess of the
regulated amount, a chemical symbol is displayed below the crossed-out
wheeled bin symbol on the battery or battery package.
Specifications
Keyboard LS Keyboard (Velocity sensitive):
88 note (A0–C8)
Maximum polyphony
120 notes / 60 notes/ 40 notes
Sounds 8 sounds
Connectors (Headphones)jack (Headphone/Line Out),
USB( ) port (TYPE B), DAMPER jack, DC IN jack
Amp output 8W x 2
Speakers 8 cm x 2
Power supply Power adapter: AC adapter (DC 12V, )
Batteries: AA batteries (alkaline or nickel-metal hy-
dride) x 6 (sold separately)
Battery life Approx. 8 hr. (when using alkaline batteries)
Power Consumption
5 W
Weight (excluding music stand)
6.0 kg / 13.23 lbs.
Dimensions (W x D x H)
(including projections, but excluding music stand)
1282 x 290 x 73 mm/50.47 x 11.42 x 2.87"
Included items AC adapter ( ), Music stand, PS-3 Pedal switch,
Owner's Manual
Accessories (sold separately)
DS-1H damper pedal, PS-1 Pedal switch
Operating requirements (USB connection)
For the latest information on OS support, please
see our dedicated web page.
https://www.korg.com/support/os/
Specifications and appearance are subject to change without notice
for improvement.
Partner mode allows you to split the keyboard into a left and right
side, and both players can play together within the same note
range. Press the power button to turn the power on while holding
down the METRONOME button. For details, download the "Part-
ner Mode and USB-MIDI/USB-AUDIO Instructions" from the Korg
website shown below. www.korg.com
www.korg.com
Thank you for purchasing the Liano Digital Piano.Korg
Published 01/2022 Printed in Vietnam
8: Auto power-off
When 30 minutes have passed without user input or demo performance,
the instrument will be automatically turned off. To disable this function,
press Auto power-off disable.This will be enabled when you turn on
the power (default setting). To re-enable this function once it has been
disabled, simply turn the power of the Liano off and back on again.
Sounds, Demo Songs and MIDI Program
Change Numbers
CC0: Bank Select (MSB) for all sounds is set to 121.
CC32 PC Sound Song title/Composer
0 0 PIANO 1 (Italian Concert Piano):
Butterfly Lyriske smastykker No.3 Op.43-1/
E.Grieg (played by Katsuhiro Oguri)
0 1 PIANO 2 (Ballad Piano): À la Manière de Borodine/
M.Ravel (played by Katsuhiro Oguri)
0 4 E.PIANO1 (Stage E.Piano): Jam Session/Naoki Nishi
0 5 E.PIANO2 (Dig.E.Piano): In Memory/Michael Geisel
0 6 HARPSICHORD (Harpsichord):
La Joyeuse/J.P.Rameau (played by Katsuhiro Oguri)
0 19 P.ORGAN (Pipe Organ): Toccata in D Minor/J.S.Bach
0 16 E.ORGAN (Electric Organ): Improvisation/Michael Geisel
0 48 STRINGS (Strings):
"Rhapsody on a Theme of Paganini" 18th Variation/
S.Rachmaninoff (arranged and played by Katsuhiro Oguri)
Troubleshooting
If you perceive any unexpected behavior from your Korg Liano Digital
Piano, please see if this guide addresses your concern. If not, or if the
problem persists, contact your nearest Korg distributor.
The Instrument turns off
If the power is left on for 30 minutes or more without the keyboard be-
ing played, the auto power-off function will turn off the Liano automati-
cally. To use the Liano, press the power button again to turn it on.
The Sound is interrupted
The instrument sounds in the Liano are created by recording individual
samples made from the actual instruments, processing them, and com-
bining them to achieve the desired sound. Depending on the detail and
complexity of the sound, one, two, or even three samples may be com-
bined to create each note. Nearly all of the sounds on the Liano use two
samples per note played. Due to this, the maximum polyphony or num-
ber of notes that can sound at once (including when the damper pedal is
pressed) is 60. Each note that you play when using the “Italian Concert
Piano” sound requires three samples, so the maximum polyphony you
will get with this sound is 40 notes. The “Stage E.Piano” requires one
sample per note, so the maximum polyphony is 120 notes.
The pitch or tone of the piano sounds incorrect in some key regions
The Lianos piano sounds replicate the sound of an actual piano as faith-
fully as possible. This means that in some regions of the keyboard, you
may sense that the overtones seem stronger, or that the tone or pitch
seems wrong. This reflects the acoustic nature of the original instrument
being sampled, and is not a malfunction.
- E-1 -- E-4 -
Getting Started
The Liano comes with the following manuals.
- Owner's Manual (printed)(this document)
- Partner Mode and USB-MIDI/USB-AUDIO Instructions (PDF)
- MIDI Implementation Chart (PDF)
Download the PDF from the following Korg website. www.korg.com
1. Insert the DC plug of the supplied AC adapter into the DC IN jack on the
rear panel of the instrument.
Loop the AC adapter cord
around the cord h ook to
prevent the plug from being
accidentally removed from
the DC IN jack. When unhook-
ing the cord from the hook,
do not pull on the cord or use
excessive force.
2. Connect the included damper switch to
the DAMPER jack on the back of the
piano.
3. Insert the supplied AC adapter into an
AC outlet.
4. Turn the Liano Digital Piano on.
Press and hold the power button to turn the instrument
on; the power LED will light up. For now, leave the piano on. When you are
done playing, press and hold the power button again to turn the instrument
off; the power LED will go dark.
5. Set the Volume level.
While playing, adjust the Volume to an appro-
priate level. The VOLUME knob controls the
output level of both the built-in speakers and
the (Headphones) jack.
Installing batteries
The Liano can also be operated on batteries.
Batteries are not included. You will need to pur-
chase them separately.
Do not mix new and old batteries or batteries of dif-
fering types. Failing to observe this guideline might
cause the batteries to leak or burst.
If the batteries are depleted, remove them immedi-
ately. Failing to observe this guideline might cause
the batteries to leak or burst.
1. Make sure that the power on the Liano is turned off,
and then remove the battery cover on the underside
of the instrument.
The battery compartment of the Liano is located on the bottom panel.
When turning the instrument upside down, place it on a thick blanket
or similar material to prevent damage to the knobs and buttons.
2. Insert six AA batteries.
Be careful to observe the correct polarity of the batteries.
3. Close the battery cover.
When the batteries are running low, the power LED will blink. Connect
an AC adapter or replace the batteries as soon as possible.
Installing the Music Stand
Attach the sheet music stand by insert-
ing it into the two music stand holes.
Using headphones
For private practice, plug your head-
phones into the (Headphones) jack
located on the rear panel. Connecting
the headphones will mute the built-in
speakers.
This stereo 1/8" (Headphones) jack
can also be used as an audio output
to connect the Liano Digital Piano to
powered speakers or other audio devices.
To protect your hearing, do not listen to loud, high-volume sounds for a
long period of time through headphones.
Cord hook
Be careful not bend this ar o much.to ea to
Softer
L
ouder
Feature Guide
×
100 ×
10 ×
1 1 2 3 4 5 6 7 8±0-1-3-5
-6 -4 -2 +1 +3
+2 +4 +5
Chorus on
Chorus off
Lower
Higher PC disable
PC enable
CC disable
CC enable
MIDI channel DOWN
MIDI channel UP
Low
High
Beat
Local on
Local off
Normal
Lighter
Heavier
Auto power-o disable
1: Touch 2: Transpose 3:
Eect 4: Metronome
Tempo Volume 5:
Pitch
6: MIDI
6: MIDI 8: Auto
po ower-
7: Demo songs
Music stand hole (right)
Music stand hole (left)
Power LED
Power button
VOLUME knob
REVERB button
METRONOME
button Sound
knob
DAMPER jack USB ( ) port
(Headphones) jack
Cord hook
DC IN jack
Selecting Sounds
The Liano provides 8 keyboard instrument sounds. Turn the
sound knob to select a sound.
Accessing Advanced Features
To access the Advanced Features, simply hold down both the
REVERB and METRONOME buttons while pressing the correct
key on the keyboard to select the corresponding parameter. Use
the large illustration above as a guide. These parameters are
divided into 8 sections.
Do not attempt to play the piano while holding down the RE-
VERB and METRONOME buttons, or unintended changes may
occur.
1: Adjust the Touch
The dynamic response of the keyboard can be adjusted to
match the performer’s playing technique. Players with a lighter
touch can achieve a wider range of expression by choosing the
Lighter setting. Players with a heavy touch should select the
Heavier setting. The power-on default setting is Normal.
2: Transpose to any Key
The Liano can be easily transposed in semitone steps to play in any key.
The range is up 5 semitones or down 6 semitones. Use 0 (No Transposi-
tion) to turn the transpose feature off.
The power-on default setting is 0.
3: Control the Chorus Effect
When the chorus effect is turned on, you will get a more expansive sound.
Each Preset sound has been created with the optimal effect settings, yet
you can turn each effect on or off to suit your own taste.
4: Set the Metronome
The METRONOME button on the top panel to turn the metronome on and
off; the Advanced Features provide access to the Tempo, Beat (Time Signa-
ture), and Volume parameters.The power-on default settings are Tempo (
𝅘𝅥 )
= 120; Beat = None; Volume = 10.
Tempo
The Tempo ( 𝅘𝅥 ) can be set from 40 to 240 using the corresponding x100,
x10, and p2-x1 keys. Values outside this range will be ignored.
For Example: To set the Tempo to ( 𝅘𝅥 ) = 85, press the p2-x10 key eight times
and the p2-x1 key five times; to set the Tempo to (
𝅘𝅥 ) = 140, press the x100 key
once and the p2-x10 four times.
Releasing the REVERB and METRONOME buttons applies the setting.
Beat (Time Signature)
The Beat function provides an accent on the first beat of the measure.
Pressing the corresponding Beat key will advance through the Beat options
in a cycle:
2/4 ¬ 3/4 ¬ 4/4 ¬ 6/4 ¬ None ¬ 2/4 ¬ ...
Volume
Pressing the Low key reduces the metronome volume; pressing the High
key raises it. The metronome volume range can be set from 1 to 13.
5: Fine-Tune the Pitch
This value can be adjusted in 0.5 Hz steps down to 427.5 Hz or up to 452.5
Hz by repeatedly pressing the corresponding Higher or Lower keys. Simul-
taneously press the corresponding Higher and Lower keys to return to the
default A4 = 440 Hz setting.
The power-on default setting is A4 = 440 Hz (Hertz).
6: MIDI
For details on connecting the Liano via USB, download the "Partner
Mode and USB-MIDI/USB-AUDIO Instructions" from the Korg web-
site.
Local On/Off
Local On: Enables the sound generator of the Liano.
Local Off: Disables the sound generator of the Liano.
Disable this (set to “Local Off”) in order to prevent echo back (two
sounds playing unintentionally at the same time).
When the power is turned on (default setting), this is set to Local
On.
Program Change (PC)
PC disable: The sending and receiving of MIDI Program Change in-
formation is disabled.
PC enable: MIDI Program Change information will be sent and re-
ceived.
When the power is turned on (default setting), this is set to PC en-
able.
Control Change (CC)
CC disable: The sending and receiving of MIDI Control Change infor-
mation is disabled.
CC enable: MIDI Control Change information will be sent and re-
ceived.
When the power is turned on (default setting), this is set to CC en-
able.
MIDI Channel
Specify the transmission channel for MIDI data. The channel num-
ber will decrease with each press of the DOWN key, and increase
with each press of the UP key. When the power is turned on (default
setting), this is set to channel1.
7: Play the Demo Songs
Each of the 8 demo songs uses one of the 8 preset sounds. Select a
song using one of the 8 corresponding keys. The song will begin to
play immediately. After the selected song has finished, the remain-
ing songs will play, in order, and the whole cycle will repeat until
stopped.
To stop the demo song playback, simultaneously press and release
the REVERB and METRONOME buttons.
* Adjust the input volume for USB-AUDIO on the devic-
es that are connected to the Liano.
- E-2 - - E-3 -


Produktspezifikationen

Marke: Korg
Kategorie: Klavier
Modell: Liano

Brauchst du Hilfe?

Wenn Sie Hilfe mit Korg Liano benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Klavier Korg

Bedienungsanleitung Klavier

Neueste Bedienungsanleitung für -Kategorien-